Watson Pro Dual V-Mount Ups Plate

Watson Pro Dual V-mount Ups Plate

Product Code: eq79866
Availability: In Stock

$507.00 $679.38

Qty

4 reviews Write a review

Description
Reviews (4)

The Watson Pro Dual V-Mount UPS Plateallows you to attach two Watson or 3rd-party micro V-mount batteries to a standard size V-mount plate for extended power to your camera, light, or other device. The plate can be used to power any device that draws up to 8A.

Featuring Uninterruptible Power Supply (UPS) circuitry, the plate draws power from one battery at a time, ensuring longer overall runtimes. The UPS circuitry senses when a battery's voltage is too low, and it seamlessly switches to the other battery. When the depleted battery is no longer being used, it can be swapped for a fresh battery to extend the runtime further. An LED indicator confirms which battery is the active one so that you know when the other one is depleted.

In addition, this compact and portable plate offers three D-Tap outputs for powering accessories simultaneously with your camera.

Dual Micro V-Mount to V-Mount Adapter Uninterruptible Power Supply Circuitry Sequential Draw Supports 8A Draw; 3 x D-Tap Outputs

Key Specs
Maximum Load	8 A
Plate Front / Battery Mount	V-Mount
Hot-Swap Support	No
Power
Maximum Load	8 A
General
Inputs/Outputs	3x D-Tap
Plate Front / Battery Mount	V-Mount
Plate Rear Mount	V-Mount Battery Plate
Number of Battery Bays	2
Hot-Swap Support	No
Dimensions	5.5 x 3.3 x 1.6" / 13.97 x 8.38 x 4.06 cm
Weight	9.5 oz / 269 g
Packaging Info
Package Weight	0.695 lb
Box Dimensions (LxWxH)	6.3 x 4.4 x 2.2"

Attach two Watson or 3rd-party micro V-mount batteries to power your camera, light, or other device that draws up to 8A
Three D-Tap outputs for accessories
Uninterruptible Power Supply (UPS) circuitry draws power from one battery at a time, allowing for longer overall runtimes

Related Questions and Answers

Q: 1. New to v-mounts, is charging through the battery’s d-tap a standard thing for all v mount batteries?

A: Yes, the vast majority of V-Mount batteries will have a D-Tap port and allow you to charge the battery through that port.

Q: 2. Would this battery charge on the IndiPRO dual Vmount charger?

A: Yes, the Watson Pro 14.4V 158Wh Slim Li-Ion Battery (V-Mount) will charge on the IndiPRO dual Vmount charger

Q: 3. Can this be charged through USB-C while still outputting from the d-tap?

A: While that may be possible, we simply do not recommend that. This is not meant to substitute for an AC Power Supply which is essentially what such a work flow would be.

Q: 4. Can you use this to charge R5 C?

A: The USB-C output on the Watson Pro 14.4V 50Wh Micro V-Mount Battery with USB Type-C Port can provide power to the Canon EOS R5 C Mirrorless Cinema Camera. The voltages and amps provided on the Watson Pro 14.4V 50Wh Micro V-Mount Battery with USB Type-C Port are 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/2.25A.

Q: 5. Does this battery works with a Sony Fx6?

A: The Watson Pro 14.4V 98Wh Micro V-Mount Battery with USB Type-C Port could power the Sony FX6 with the BP-U dummy battery, such as the Anton/Bauer P-Tap to BP-U30/60 Dummy Battery (14.4V) (BH #ANPTBPDB7.2).

Q: 6. Does this work on the Aputure LS C120 lights?

A: Yes, it works with the V-MOUNT version of the light.

Q: 7. Can I use this battery as a power source for the BMPCC 4K?

A: Yes, you can. You'll need the a d-tap to 2-pin LEMO cable like one of these: Tilta (17.8") https://bhpho.to/3cZpydV Kondor Blue (48") https://bhpho.to/2Zagsm9

Q: 8. Is this compatible with any v-mount battery?

A: Yes, it will, but keep in mind that third-party micro V-mount batteries larger than 3.9 x 4" (W x H) might limit the functionality of this plate due to size discrepancies.

Q: 9. Can I use this device on a single channel charger to charge two V-mount batteries?

A: no you can not

Q: 10. Will this be able to power Venice 2 with accesories?

A: Yes, the Watson Pro 14.4V 158Wh Slim Li-Ion Battery can power the Sony Venice 2 Digital Motion Picture Camera (8K).

Anthony	18/08/2024
[0.695 lb] I like this v-mount battery plate a lot. Fits on the stand perfectly. No dangling battery. And not as expensive as other options. 5

Art Video	09/08/2024
[3x D-Tap] Make any NP-F battery devove turn into a much longer way to power it long. Caution should be taken as not all devices support 16.6 Volts, ESPECIALLY CAMCORDERS and small lights, with one exception such as the genaray TrailBlazer, a NPF battery based light that accepts voltages from 7.4 to 18 Volts! So that's not a problem since the unregulated voltage that leaves this adapter is a maximum of 16.5V, being the same voltage that usually outputs from the main connectors or D-Tap ports. That means, that you can install a FULL SIZE 200 WATT-HOUR V-Mount battery on that and it will be powered until next century at 100%. Read the manual of the device you're using this on, make sure it supports 16.6 volts and more. I'm all about convenience and ways to hack powering things, and this product is one heck of a very cool and needed adapter! [I have received this product in exchange for my honest review] 5

Art Video	28/04/2024
[8 A] This belt clip is essential for complementing your Micro M-Mount accessories. The belt is very strong, no sharp edges and slides on belt and directly on pants., or anything that has a 1/4 opening that you can slide this in. With featuring a D-Tap jack, plus the USB-A and C jacks from the battery, you can power multiple things while you're walking or moving around. You can charge your phone in your pocket via USB-A from battery , while powering a BlackMagic pocket cinema camera and a monitor as you go when your Rig is not available. There are lots of people including myself who will want to take professional video from an anniversary or vacation. And this belt clip will let me power my pro gear at full and free mobility, either on a shoot, or vacation. Once you feel the click on the V- Lock, that battery or belt clip is not going anywhere. [I have received this product in exchange for my honest review] 5

Art Video	25/04/2024
[8 A] First of all, I'd like to remind you that these plates not only accepts Micro V-Mount but ALSO accepts full size V-Mount batteries! it's the same V size. These will go well on anything rod like from 19 to 22 mm. I've tested this on an Amazon Basic stands which I use a lot for loading lighter items since those stands are so light and it will fit on the lower section tube of that stand. So. to me that's perfect. It would be cool if Watson came up with a figure 8 on this unit, divided in 2 sector design so it would accept a wider range of diameters. The screw would be then located at the largest part of that 8 shape, which would take care of both ways you try to place that on. But if you require a larger pole to mount your battery, Watson also makes on just for that. The BH link is https://www.bhphotovideo.com/c/product/1509727-REG/watson_mi_vm_sclamp_micro_v_mount_plate_with.html I have almost every Micro V-Mount accessory from these series and I can assure you these things are nearly unbreakable and assemble VERY fast. Another HUGE PLUS on this, are the threads and the wingnut. It has that Mathews craft quality. A simple tap on that wingnut will cause the whole thing to unscrew in less than 1/2 second. The quality of those threads is so good, it would fly out if you don't catch it on time. Excellent craftsmanship. You won't be turning that wingnut over and over. It's a simple tap on that wingnut and it's OUT. If you want something that mounts fast and to be able to mount your battery in the weirdest places, this is it! [I have received this product in exchange for my honest review] 5