The Watson Pro 14.4V 50Wh Micro V-Mount Battery USB-Ccombines functionality with a small form factor. It's smaller and lighter than full-size V-mount batteries but delivers up to 8A to power professional cameras and LED lights. This 50Wh battery solves the problems of weight, space, and travel when you're on the go.

The compact battery offers multiple integrated accessory ports, including USB Type-C and USB Type-A for powering and charging mobile devices, tablets, and laptops while you're on a shoot. A D-Tap port with a 14.4V output allows you to power a light or monitor simultaneously with your camera, or to power the camera itself. When you're ready to recharge the battery, you can use an optional V-mount charger or use the D-Tap, USB Type-C, or micro-USB ports to connect a power source.

A backlit LCD screen on the front of the battery activates at the press of a check button and confirms the remaining battery capacity and output voltage. A built-in intelligent control circuit protects against damage caused by current, voltage, temperature, or short-circuiting, ensuring safer operation with this lightweight battery weighing just 0.7 lb.

Compact & Lightweight at Only 0.7 lb    Support for up to 8A Continuous Output    USB Type-A, Micro-USB & USB Type-C Ports    D-Tap Accessory & Charging Port    Backlit LCD Status Display    Built-In Intelligent Control Circuit

The 50Wh Micro V-Mount Battery fits onto a standard V-mount plate and supports up to 8A of continuous draw from professional cameras, lights, and monitors that you would normally power with a full-size V-mount battery.

Phones and laptops can get drained during lengthy shoots. To keep you in touch and able to check messages and mail, the integrated USB Type-C and USB Type-A ports let you power and charge USB devices like laptop computers, smartphones, and tablets during your shoot.

For added functionality, the battery is outfitted with a D-Tap port to power accessories like monitors or lights, whether independently or at the same time as your camera.

A check button activates the backlit LCD screen and shows remaining battery capacity and output voltage, allowing you to prevent unexpected surprises that could interrupt your workflow.

The compact battery can be charged via an optional V-mount charger, or using the D-Tap, USB Type-C, or micro-USB ports.

A built-in intelligent control circuit protects against damage caused by current, voltage, temperature, or short-circuiting.

• USB Type-C: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
  

• Micro-USB: 5V/3A
  

• USB Type-A: 5V/2.4A, 9V/2A, 12V/1.5A

Related Questions and Answers

Q: 1. Will the power button completely turn off the battery and shut off the power output?

A: Even when the SmallRig VB50 is totally shut down there will be power draw. It’s normal that when in long time storage the battery will lose some power because it has self-consumption. If the battery is left unused for a long time, please charge it to about 70% every three months and put it in a dry and ventilated environment for a longer lifespan.

Q: 2. Is it possible to separate the clamp from the V-Mount release? How is the V-Mount release connected to the clamp?

A: This has screws holding the V-mount in place. We do not recommend removing them though.

Q: 3. Is the clamp wide enough to attach to a Zhiyun Crane 2 body?

A: As the base of the Zhiyun Crane 2 is wider than this clamp can support (up to 1.4"), this would not be recommended. An accessory that would mount to the base of the Crane 2 is a Zhiyun-Tech Extension Mounting Ring for Crane-2 (SKU: ZHGMBC531). This could be then attached to a v-lock assembly such as the Smallrig 1846 V-Lock Assembly (SKU: SM1846B).

Q: 4. Can this battery power 8K 60fps recording on the R5C?

A: When utilizing the USB-C PD powering on the SmallRig VB50 Mini V-Mount Battery (50Wh) you will be able to shoot 8k 60p on the R5C.

Q: 5. Can I use this device on a single channel charger to charge two V-mount batteries?

A: no you can not

Q: 6. Will this battery power a Lowel LED Tota?

A: Yes, the SmallRig VB50 Mini V-Mount Battery (50Wh) would be able to power the Lowel TotaLED Daylight LED Floodlight BH #LOTOTALED. The Lowel Tota LED can be power by V-Mount Battery or AC Adapter.

Q: 7. Will this battery fit in a micro V-mount hot swap plate that has two batteries side by side?

A: Yes, the SmallRig VB50 Mini V-Mount Battery (50Wh) is a mini size battery, and would work with mini hot swap adapters, if the batteries are mounted side by side.

Q: 8. Could this battery power the amaran COB 60x S Bi-Color light, and for how long?

A: Yes, the SmallRig VB50 Mini V-Mount Battery (50Wh) can power amaran COB 60x S Bi-Color light, however theoretical estimate of the battery life is only about half an hour using it at full power. The battery is 50Wh and the maximum power draw of the light is 78W which would be (50Wh/78W)*0.8=0.51 please keep in mind this is a theory only, the battery may draw faster in cold conditions or last longer if the light is used at lower power. We do recommend to look into higher capacity batteries like SmallRig VB99 Mini V-Mount Battery (99Wh) https://bhpho.to/3tBiJGX and you will need a power cable Kondor Blue Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable for amaran (16 to 32") https://bhpho.to/4ctc0DE.

Q: 9. Is this compatible with any v-mount battery?

A: Yes, it will, but keep in mind that third-party micro V-mount batteries larger than 3.9 x 4" (W x H) might limit the functionality of this plate due to size discrepancies.

Q: 10. Is this compatible with Komodo X?

A: The SmallRig VB50 Mini V-Mount Battery has a formfactor that is too wide to be mounted onto the RED Komodo-X. You must use a "Micro," series battery on this and the V-Raptor.