Outfitted with a magnification and objective lens combination that is optimized for low-light use, the Minox 8x56 X-lite Binoculars | High-Performance Opticscombine an ergonomic form factor with important optical features to give you an optic that offers performance from the predawn hours all the way through past dusk.

The binoculars 8x power brings your subject in close for observation while presenting an ultrawide exit pupil and extra-long eye relief, making them ideal for bird watching, hiking, and sightseeing. The massive 56mm objectives keep the views bright and sharp even in low and challenging light like at dawn and dusk or under heavy cloud cover or forest canopies. Anti-reflection fully multi-coated optics and phase-corrected BAK4 roof prisms transmit bright and clear high-contrast images with true neutral color rendition and crisp clarity.

Utilizing an open-bridge/dual-hinge configuration helps to offset the weight of the front lenses without sacrificing stability while providing plenty of room to wrap your hands completely around the optical tubes for a better grip. The chassis is made of a lightweight and durable aluminum alloy, while the optical tubes are nitrogen filled and O-ring sealed for water and fogproof performance—so the X-Lite binoculars will be more comfortable than yourself if the weather takes a turn to cold and wet.

Phase-Corrected BAK4 Roof Prisms    Anti-Reflection Fully Multi-Coated Glass    Long Eye Relief and Wide Exit Pupil    Nitrogen Filled, Waterproof & Fogproof    Open-Bridge, Dual-Hinge Configuration    Aluminum Alloy Chassis    Large Knurled Center Focus Wheel    Rubber-Armored Exterior    Tripod Mountable with Optional Adapter    Twist-Up Rubber Eyecups

• Moderate 8x power magnifies the view while preserving an extrawide exit pupil and ultra-long eye relief
• Large 56mm objective lenses are optimized for challenging low-light use, ensuring views remain bright and sharp from the predawn hours through past dusk
• Roof prism light path allows for narrower optical tubes versus Porro prism design for more comfortable handling without compromising performance
• BAK4 prisms deliver a round exit pupil and a crisp and clear image with limited edge distortion
• Phase-correcting prism coatings reduce or eliminate internal interference to correct ghosting and halos for better resolution and clarity
• Anti-reflection fully multi-coated optics improve light transmission to produce a neutral color rendition and boost contrast
• 337' field of view at 1000 yards

• Open-bridge, dual-hinge configuration offers stability and rigidity
• Bridge design provides more gripping surface for steadier handling
• Large knurled center focus wheel
• Right-eye dioptric correction
• Twist-up eyecups for comfortable use with or without eyewear
• Tripod mountable with 1/4"-20 socket
• Exceptional 19.8mm eye relief improves viewing comfort and reduces eyestrain
• Ultra-wide 7mm exit pupil will completely cover most pupils in low and challenging light conditions to keep the whole scene in view

• Bridge offers much more gripping surface area versus conventional designs to make them more comfortable and secure, so you can hold the binoculars with one hand
• Protective rubber armoring
• Nitrogen filled and O-ring sealed for water and fogproof performance
• Textured exterior for sure handling in cold and wet weather
• Tethered one-piece ocular rainguard and objective lens caps prevent loss and allow for fast reaction when opportunities present themselves
• 6.6" long
• Weight: 34.2 ounces

Related Questions and Answers

Q: 1. What are the main differences between X-Active 8x25 and the older Minox BV 8x25 (62059) they replace? I compared the specs and can see the X-Active are a few ounces lighter but not much else. Are there any differences in terms of optics?

A: Its a newer coating and a newer procedure on putting the coatings on. Better image color results and improvement in light transmission

Q: 2. is the handle removable?

A: Yes, the handle on this tripod is removable.

Q: 3. Is the head interchangeable?

A: Yes. The head is interchangeable.

Q: 4. We need to replace the tilt screw(s) that have broken or cracked. How can we buy replacements?

A: For replacement parts, please contact the manufacturer directly.Bescor Video Accessories Ltd. 244 Route 109, Farmingdale, N.Y. 11735Phone: 631-420-1717 Josh@a href= http://bescor.com target= _blank bescor.com/a

Q: 5. Will this work via an MIDI port to USB adapter like B&H # ARMCONNECT?For controlling Roland v-1hd or x-air 16 mixer?thanks

A: The connections for the cable you've listed aren't compatible with the MIDImix. I would not advise using it for this purpose without a computer.

Q: 6. What makes this mode 2 - 3 times more expensive than the same 8x56 models with HD glass?

A: Meopta 8x56 MeoStar B1 Plus Binoculars have the follow features whihc are not found in the lower cost models: Space-Saving Schmidt-Pechan Roof Prisms, MeoShield Exterior Coatings, and a 22mm eye relief.

Q: 7. Hi 1.What is the IPD for these ? 2.Are these poro or roof prism binoculars ? Thanks

A: Interpupillary Adjustment 54 to 74 mm / 2.1 to 2.9" They are porro prism.

Q: 8. Minox appear to not publish exit pupil distance eye relief. This measurement is critical to know for eye glasses wearers. What is it for these binoculars?

A: A ccording to the Minox manual for the Minox 8x56 X-HD Binoculars BH #MI8X56XHDB • MFR #10023 the rye relief is 20mm. https://cache.tradeinn.com/images/pdf/manuales/eng_minox_manu_xhd_series.pdf

Q: 9. How do I remove the quick release plate?

A: There is a lever on the tripod head that allows you to take the quick release plate off and on. If you have purchased this tripod and are having issues with the quick release plate please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a so we can assist you.

Q: 10. Are the roof prisms in the Minox 8-44 X-HD phase-coated?

A: Dielectric-Coated Roof Prisms. This type of coatings are found on roof prisms of binocular and are there to increase light reflectivity - As the light is incident at a glass–air boundary with an angle less than the critical angle, total internal reflection does not occur at that surface. To solve this problem, a mirror coating is used on those surfaces. To quantify typically an aluminium mirror coating is used that has a reflectivity of 87% to 93%) or a silver mirror coating (reflectivity of 95% to 98%) is used. The light transmission of the prism can be improved by using a dielectric coating rather than a metallic mirror coating. This causes the prism surfaces to act as a dielectric mirror. The dielectric multilayer coating increases reflectivity from the prism surfaces by acting as a distributed Bragg reflector. A well-designed dielectric coating can provide a reflectivity of more than 99% across the visible light spectrum.