Power your Blackmagic Pocket Cinema Camera 6K or 4K using a PORTA-PAK battery or mounting enclosure with this IndiPRO PORTA-PAK Coiled Power Cable BMPCC 6K/4Kfrom IndiPRO Tools. The cable features a right-angle 2.5mm DC barrel plug on one end that can plug into a PORTA-PAK battery or mounting enclosure. A 2-pin connector on the other end provides power to the camera.

The coiled cable can extend from 18 to 40" in length. The cable is unregulated, so be sure to use this cable with equipment that has a specific output voltage such as the PORTA-PAK to prevent damage to your camera.

Power BMPCC 6K or 4K with PORTA-PAK    Right-Angle 2.5mm DC Barrel Connector    2-Pin Camera Power Connector    Coiled Cable Measures 18-40" in Length    Unregulated Power Cable

Blackmagic Pocket Cinema Camera 6K or 4K

IndiPRO Tools PORTA-PAK battery

IndiPRO Tools PORTA-PAK battery mounting enclosure

Related Questions and Answers

Q: 1. Will this work with the original Blackmagic Pocket Cinema Camera 1080p? Do I need an additional cable? Thanks!

A: If you were looking to power the orginal BMPCC from one of our Universal Power Grip than this is the cable you would need: https://www.bhphotovideo.com/c/product/1019563-REG/indipro_tools_indi_vvc_bmpk25_24_power_cable_2_5mm.html

Q: 2. Is the dummy battery cable tip proprietary? I have dummy batteries for different batteries (Sony and Olympus) so I want to know if I can use those cable tips on this one.

A: No not proprietary, the 8 Volt output is a standard 2.1mm and the 12Volt output is a 2.5MM connector

Q: 3. How does this mount to the camera? Why are there no photos of this in a working configuration (i.e. on a camera)?

A: this goes onto an existing cage

Q: 4. How long does it power the BMPCC Pro for?

A: The Universal Power Grip should run the BMPCC Pro for approximately 4 hours depending if you are powering any additional devices from the power grip.

Q: 5. Will the power cable work with the original BMPCC?

A: No, these have different barrel tips.

Q: 6. Will this cable work to power the Blackmagic Pyxis 6K?

A: Yes, the ANDYCINE Coiled D-Tap to BMPCC 4K Power Cable will also support the Black Magic Pyxis Cinema camera for D-TAP powering.

Q: 7. Will this power the Panasonic gh5s with a dummy battery?

A: Yes, but a dummy battery is needed. Please review the following Tilta DMW-BLF19 Dummy Battery to D-Tap Power Cable (26") BH #TIDBGHPTAP • MFR #DB-GH-PTAP https://bhpho.to/3vpu8t4

Q: 8. Does it swivel once its attached to the rods? I'd like to use it with my 6kPro but do not want it sitting in front of the screen, would prefer that it sits parallel to the rods or below.

A: The IndiPRO Tools Gold Mount Battery Plate with 15mm Rod Mount & Coiled Cable for BMPCC 4K/6K (18-40") doesn't swivel but it can tilt up and down when mounted to 15mm rods.

Q: 9. Great Concept! I've 2 questions: First, would the battery be capable of powering the camera using the 2.5mm barrel, as well as an on-camera light using the 2nd 2.5mm 12v barrel? And also, is the internal battery interchangeable and possibly externally charged, considering that may be a large power draw? Thanks!

A: yes it is possible to power multiple devices simultaneously as described with this batter handle. No the internal batter is not interchangeable.

Q: 10. What Sony cameras will this power?

A: This will power any Sony camera as long as you have a dummy battery with a D-tap plug on the other end to plug into the handgrip. We currently sell this handgrip with Sony NP-FW50 and NP-FZ100 dummy batteries.