Triad-Orbit Sm-Iom1 Quick-Change Coupler Plate

Triad-orbit Sm-iom1 Quick-change Coupler Plate

Product Code: eq80181
Availability: In Stock

$209.97 $329.65

Qty

7 reviews Write a review

Description
Reviews (7)

The Triad-Orbit SM-IOM1 Quick-Change Coupler Plateis an IO quick-change coupler plate designed to attach to the Triad-Orbit SM-SW1 swivel and connect to the IO-GC grip clamp for temporary truss-mounted Dolby Atmos speaker setups. It is also compatible with other components that are outfitted with Triad-Orbit's IO quick-change system.

Attaches to the SM-SW1 Swivel Ideal for Pairing with IO-GC Grip Clamp For Temporary Truss-Mounted Atmos Setups Compatible with IO-Connected Components

Parameters
Type	Adapter
Packaging Info
Package Weight	0.695 lb
Box Dimensions (LxWxH)	6.6 x 4.7 x 2.5"

Related Questions and Answers

Q: 1. This is wireless? Can be controlled wirelessly and is battery powered?

A: It comes with a remote and a battery.

Q: 2. Will this work with a SM7b? Is there a steel version? https://www.bhphotovideo.com/c/product/225820-REG/Shure_SM7B_SM7B_Cardioid_Dynamic.html?gclid=CjwKCAjw64eJBhAGEiwABr9o2EWXhHn_Oe3h7FhPcGs7rP-Bzs4VYA0FbuxpakoHxp2-cGci8FS6FBoCPtQQAvD_BwE

A: This will work with any microphone. All the quick change adapters by Triad are made of aluminum.

Q: 3. How much it weight? Consider that fit in a boom with mic.

A: The Triad-Orbit IO-RA is made of aluminum, which is much lighter than steel. It weighs 4 ounces (0.25 lb) / 113.4 grams (0.1 kg).

Q: 4. can syncro flashes in each shot of camera?

A: The hot shoe of he camera does not connect to the Vello FreeWave Orbit Motorized Pan Head with Remote and MPH-P8 Plate Kit. So using a flash attached via the hotshoe of the camera will work.

Q: 5. Does it works with a Go Pro?

A: I believe so. I think you just have to buy the tripod mount for the go pro https://a href= http://www.bhphotovideo.com/c/product/999130-REG/gopro_abqrt_001_tripod_mounts.html target= _blank www.bhphotovideo.com/c/product/999130-REG/gopro_abqrt_001_tripod_mounts.html/a

Q: 6. I already own some expensive heavy duty Atlas mic stands. I would like to consider the Triad Orbit quick change adapter as a means to quickly detach my boom from the stand itself. My booms have two pound counter weights and I generally use these stands for some very heavy and expensive condenser Mics. Does this adapter hold firmly and securely with no worry of vibration due to a loose or even slightly wobbly connection ? Because these 7/8 diameter mic stand setups weigh over twenty pounds total, I would like to be able to achieve rapid setup and takedown that they may also serve as stage performance stands. I realize that my question is lengthy. But, I think that the information given should be considered when looking to purchase a 40$ adapter. Thank you.

A: Hey Raymond,Thanks for your inquiry. The Triad-Orbit IO-R Quick-Change Coupler was designed and purpose-built for professional support applications. IO-R will provide solid, vibration-free coupling for your Atlas large format stands (MS20, MS25, MS43, SB36) and PB booms. Please refer to the PROfile videos on the Triad-Orbit website to see the IO-R in action at some of the world's finest recording facilities (a href= http://www.triad-orbit.com/profile target= _blank http://www.triad-orbit.com/profile/a).The IO-R ships with an IO-H1 hex mounting head. The hex shaft of the IO-H1 is made of brass. For heavy-duty and inverted support applications, we recommend the use of the IO-H2 hex mounting head. The IO-H2 features a stainless steel hex shaft and a SafetyStop notch to prevent accidental uncoupling. Incorporating the IO-H2 head with IO-R coupler will allow you to safely support, secure, suspend and position heavy studio mic like AEA & vintage RCA.Compare the performance of the Triad-Orbit IO-R/IO-H2 combo to any competitive quick-change couplers for your demanding application. Also, our new IO-RA lightweight aluminum body quick-change coupler is also available at only $20.00. Thanks for your interest in Triad-Orbit Advanced Stand Systems.

Q: 7. Is the IO-H2 5/8" Mounting version compatible with the IO-R Quick-Change IO-R Quick-Change Coupler Retrofit Kit? Want to set up a SM7B, Beta 58a, and Rode Procaster to easily swap on and off a Tama 5/8 thread MS756RELBK boom stand.

A: Yes. The IO-H2 5/8" Mounting Head from Triad-Orbit allows you to integrate 5/8" threaded gear to one of their IO-equipped stands or mounts, and is designed for added weight handling capacity.

Q: 8. what is the load capacity?

A: Not rated for weight. Designed for microphone for use. It is very rugged and robustly built. it should be able to handle any microphone.

Q: 9. The specs show 4 pounds max weight; my main camera/lens is 3.5 pounds. How will it do running at 90% of its weight limit?

A: The unit is rated for up to 4lbs. Any amount of weight up to and including 4lbs will be fine.

Q: 10. The Kali IN-5-C already comes with a backing plate almost identical to this. But Kali say the original IN-5 is not suitable for wall mounting. So is this for the original IN5 or not?

A: Yes, the Triad-Orbit Mounting Plate for Kali IN-5 Speakers is intended for use in wall mounting a single Kali Audio IN-5 3-Way Studio Monitor. You can see how it is attached to the wall and to the speaker in the photos shown on the item page.

Mannwolf	17/09/2024
[Adapter] If you need something like this, the buck stops here. This stuff is MADE! 5

Ronald	03/09/2024
[0.695 lb] Simple connector to the additional Triad-Orbit mic boom I have. Works as I knew it would to quickly switch mic positions with the QD connector. 5

Richard	23/07/2024
[0.695 lb] The logic behind this product is pure simplicity. If you are working gigs regularly, it's easy to see how much time and fiddling you'll save by not having to thread on (and off) dozens of microphone clips per job. Plus, it will eliminate the possibility of damaging the fine 5/8-27 threads from accidental cross-threading. The hex-shaped pin prevents the microphone from spinning / loosening itself when attached horizontally to a boom arm. And Triad-Orbit was smart enough to make this work with any standard mic stand or boom -- not some proprietary hardware attachment. They provide adaptors for 3/8 European threaded stands, and a 1/4-20 threaded stud for cameras -- plus an extra set of set screws in case you lose any in the backstage darkness! I was impressed with the high-quality packaging, and the couplers themselves seem to be manufactured to a high standard. I've never regretted buying high quality tools, and this is no exception. I'll be buying more. 5

Black Beard Aud	13/07/2024
[0.695 lb] Great product. The item weighs heavier than expected. Do take note it adds quite abit of extra length, about 2 inches or so. Otherwise feels rugged and seems like it will last. 5

Darryl	08/07/2024
[0.695 lb] If you have a need for quick disconnect - these are great. They feel very solid and snug. I am using mic stands to hold headphone amps next to stage performers for wired IEMs. I didn't want to have to spin the whole headphone amp in circles for mounting/unmounting them. So this was a perfect solution. 5

Mike	07/05/2024
[Adapter] I provide sound for a variety of bands, and these quick-release couplers save a lot of time. They are very well built and provide a solid, tight fitting between the mic and stand. They add a couple of inches to the stand (or boom), but so far this hasn't presented any problems; in fact, the slightly longer booms come in handy from time to time when you need a little extra reach (like rigging vocals for a grand piano). It would be nice if the separately available mounting heads (IO-H) were also available in a lower-priced multipack. Purchased individually they cost 75% of the entire assembly. 5

ZooHead	30/11/-0001
[Adapter] All the Triad Orbit products are very high quality, I would not hesitate to buy anything from them. This is a solid clamp. 5