The Ubiquiti Networks POE-54-80W PoE Adapter 54V 80Wis designed to power most PoE devices from Ubiquiti Networks. This 54 VDC, 80W adapter provides surge, clamping, maximum surge discharge, and peak pulse current protection to ensure that your connected PoE devices remain operational. An AC cable with earth ground is included.

54 VDC at 1.5A Output Voltage    80W Output Power    Powers Most Ubiquiti PoE Devices    100 to 240 AC at 50/60 Hz Input Voltage    Gigabit LAN Port    Earth Grounding & Surge Protection    Peak Pulse Current & Clamping Protection    Protection Against ESD Events

Compatible with most Ubiquiti Networks PoE devices

Provides surge, clamping, maximum surge discharge, and peak pulse current protection for your connected PoE devices

AC cable with earth ground included

Shielded RJ45 ports

CE, FCC, IC, and UL certified

Related Questions and Answers

Q: 1. Does this work with the Unifi AP AC Lite? The instructions say the Lite comes with a 0.5A POE injector, but this one is 1.0A.

A: Yes it works fine with the Unifi AC Lite.

Q: 2. Can this work for a camera with these requirements Per camera: Hi-PoE: 42.5 VDC to 57 VDC, max. 38W/0.9 A?

A: This is passive poe. it most likely is not going to work with a surveillance camera

Q: 3. Will this work on a Ltu rocket?

A: The Ubiquiti Networks UniFi PoE++ Adapter would not work with the Ltu rocket. We recommend that you use the 24V, 1A gigabit PoE adapter that comes with the purchase of the Ltu rocket.

Q: 4. Is the picture on the 50v 60w old? It doesn't look like the picture on the Ubiquiti website.

A: The Ubiquiti Networks 50V PoE Adapter with Gigabit LAN Port BH #UBPOE5060W • MFR #POE-50-60W is the most current version. It is possible that we are using a different image of this device.

Q: 5. Can the 50V 60W Gigabit Adapter be used with Ubiquiti Networks U6-LR UniFi 6 AX3000?

A: Yes it will work with the Ubiquiti Networks U6-LR UniFi 6 AX3000 Long-Range Access Point BH #UBU6LRUSe

Q: 6. Is this an 802.11af or 802.11at compliant power injector?

A: This is 24 volt, which makes it poe+ and therefore 802.11at.

Q: 7. Without a reset button on the PoE injector, how does the remote reset capability work?

A: When you run the Ubiquiti software, Unifi software will be able to find the unit on the network and then reset the Ubiquiti Networks U-POE-af PoE Adapter.

Q: 8. What is the max data transfer speed on this unit?

A: This unit will utilize 10/100 Mbps.

Q: 9. How any watts does this supply?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF supplies PoE 48 VDC at 0.3 A (Output). Convert amps to watts: (A)*(V) = (W). 48 VDC x 0.3 A = 14.4 watts.

Q: 10. Will this work well for 300 ft run?

A: No, the Ubiquiti Networks 48V PoE Adapter with Gigabit LAN Port would not support power over a 300ft cable run. We suggest POE extenders when powering over a long cable distance. POE Extender - B&H # VEVORORM or B&H # VEVORORMXT