The black Countryman B6 Omni Lavalier Mic for Paso Wireless Transmittersfrom Countryman B6 Omni Lavalier Mic for Paso Wireless Transmittersis a very small lav microphone measuring one tenth of an inch in diameter. It can be used to capture audio for theater, broadcast, house of worship, and general lavalier applications.

This version offers the highest gain for general speaking such as in presentations or sermons. Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in a performer's hair or on costumes, ties, or behind a shirt button. It can also be attached to eyeglasses, for a secure, discreet, and convenient alternative to hair miking. The ultrathin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's aramid-reinforced cable terminates to a TA4F connector for direct connection to Paso MW223 wireless bodypack transmitters.

Additionally, the included swappable protective caps let you shape the frequency response for different situations or to match other microphones. The B6 is resistant to makeup, sweat, and moisture when used with a protective cap, which can be quickly removed for cleaning or replacement.

For Theater, Live Stage & Studio Use    Hardwired Connector    Fits Paso Transmitters    TA4F (PA), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Most Uses    Includes Windscreen & Cable Clips    Includes Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Standard, for most uses.

Related Questions and Answers

Q: 1. Can this pair with the previous UwMic9 model?

A: No, components from the Saramonic UwMic9S KIT2 2-Person Camera-Mount Wireless Omni Lavalier Microphone System cannot be used together with components from the original UwMic9 series. The UwMic9S series is not backwards. However, the two separate systems can be used simultaneously.

Q: 2. Is this compatible with a Panasonic AGUX90?

A: Yes, the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System is compatible for use with the Panasonic AG-UX90 UHD 4K Professional Camcorder.

Q: 3. Assuming these also work with ipad air?

A: Yes, the Movo Photo EDGE-DI-DUO 2-person wireless system is compatible for use with the iPad Air.

Q: 4. What did they upgrade in the G4 over the G3?

A: I had a G2 camera mount and now have the G4. The G4 comes with an upgraded lavalier and the electronics seem to be quieter overall. I have not yet used this mic in the real world.

Q: 5. Can I used this mic to shoot with my gopro 6?

A: Yes you can, if you have the GoPro Pro 3.5mm Mic Adapter, BH #GO35MA. https://bhpho.to/2xKXdEv

Q: 6. How does this system compare to the Sony UWP-D21?

A: You will get very similar quality and range out of either system and both are very highly preferred for professional applications. Either of these are great for using many wireless microphone systems in the same space and at the same time, without running into interference with each other. If you are only going to require a set up with one or two wireless microphones running at the same time, then I recommend considering something more like the Sennheiser AVX system because it will give you the same great quality and it is more compact as well, even though it is not quite as frequency agile as the above solutions.

Q: 7. I can record voice memo but no audio with Filmic pro or iPhone video app!

A: The information Raul provided should be helpful. You can also try turning closing the apps and then turning off the phone to reset everything. Then connect the receiver and relaunch the app you are going to use.

Q: 8. has anyone use Sennheiser EW 112P G4 to send line level audio from a computer audio out to a mixer board line level in stereo i know i will need a 3.5 to 3.5 mm for the transmitter and 3.5 to RCA for the mixer board line in?

A: While the Sennheiser EW112PG4 can be used to transmit line level audio wirelessly, it will only send a single channel of audio. You can mono sum the output of the computer using this device, BH #RALTIBLOX , use the BH# SECL2 cable for xlr into the transmitter, and go single XLR out into the mixer. If you need stereo sends, you would need two transmitters and two receivers for the 2 channels of audio. Here a system, more designed for stereo transmission, BH #ALSTEALTHWRL.

Q: 9. Can i get an adapter to change the audio output from 3.5mm to USB Type-C or Micro depending on what device i connect it to?

A: The Saramonic SR-C2003 is an excellent 3.5mm Female to USB-C adapter that would work perfectly for this. I have not seen a MicroUSB adapter that can handle audio. As far as I know the protocol is not up to the challenge, that is why USB-C took over. BUT and phone that has MIcroUSB will have a headphone port, for that use the included 3.5mm TRS to TRRS output cable that comes with the Blink 500 B1 & B2.

Q: 10. Which frequency would be best for Hawaii (specifically the North Shore of Oahu)? I see some frequencies aren't allowed in Hawaii? Maybe? A specific frequency would be appreciated.

A: There is no one frequency that is best to use all of the time. Any of the bands offered will work throughout Hawaii. The reason there are three bands is so that you can use many systems in the same space and at the same time. The receiver will scan for the best available frequency within that band to use at that time. You can use up to around 8 systems in the same band, in the same space and at the same time, before you would need to worry about switching bands for your next group of systems, to avoid interference with your first group of system.