Ozen Agile 5S S-Loc 75Mm Fluid Head & Tripod System

Ozen Agile 5s S-loc 75mm Fluid Head & Tripod System

Product Code: eq80393
Availability: In Stock

$4,830.75 $7,729.20

Qty

12 reviews Write a review

Description
Reviews (12)

The OZEN Agile 5S S-Loc 75mm Fluid Head & Tripod Systemis a 75mm half-ball fluid tripod head built for compact, handheld-size cameras. It's designed with 7+0 steps of counterbalance fine-tuned specifically for such small and lightweight cameras. With a counterbalance payload of 0-15 lb, the head supports these cameras with or without accessories. The Agile 5S features OZEN's S-Loc sideload quick release camera plate system, which provides increased front to rear balance adjustment and accommodates front-heavy or back-heavy loads.

The Agile 5S offers 3+0 steps of fluid pan and tilt drag and has independent pan and tilt locks. Drag is designed to be ultra smooth and to remain so through continued use. The "0" setting being available for both counterbalance and drag, the Agile 5S is also highly suitable for still photography.

The head provides two rosette mounts and includes an extendable pan bar that can be attached to either the left or right rosette. The rosettes are replaceable for added longevity of the head. The supplied camera plate comes with both 1/4"-20 and 3/8"-16 mounting screws. An illuminated bubble level is also built in and powers on at the press of a button so you can balance the head in any environment.

For Mirrorless/DSLR Cameras up to 15 lb Agile 5S S-Loc Sideload Head 75CF3 75mm 3-Stage Carbon Fiber Tripod Soft Case

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male 1x 3/8"-16 Male
Camera Plate	Quick Release
Head Type	Fluid Head
Drag Control	Yes
Load Capacity	15 lb / 6.8 kg
Weight	4.8 lb / 2.18 kg
Camera Attachment
Camera Mounting Screw	1x 1/4"-20 Male 1x 3/8"-16 Male
Camera Plate	Quick Release
Head
Head Type	Fluid Head
Base Mount	75 mm Half Ball
Counter Balance	Incremental 7-Step Plus 0 (0 to 15 lb / 0 to 6.8 kg)
Pan & Tilt
Drag Control	Yes
Independent Pan Lock	Yes
Independent Tilt Lock	Yes
Vertical Tilt	+90° to -80°
General
Load Capacity	15 lb / 6.8 kg
Accessory Mounting	2x Pan Handle Fitting
Bubble Level	Yes (Illuminated)
Weight	4.8 lb / 2.18 kg

75mm half-ball fluid tripod head
7+0 steps of counterbalance tailored to handheld-size mirrorless/DSLR cameras
0-15 lb counterbalance payload
S-Loc quick release camera plate system
3+0 steps of fluid pan/tilt drag designed to be ultra smooth over continued use
Independent pan and tilt locks
Two replaceable rosette mounts
Extendable pan bar included
Camera plate with 1/4"-20 and 3/8"-16 mounting screws
Illuminated bubble level
Aluminum build

Related Questions and Answers

Q: 1. Is the S-Loc plate system compatible with Manfrotto-style plates?

A: Yes, the S-Loc quick release plate system is compatible with Manfrotto style quick release plates such as the 501PL.

Q: 2. Is the base plate Manfrotto 501PL compatible?

A: It will not match the 501PL plate.

Q: 3. Is the pan handle included or is that separate?

A: Yes it is. A Pan Handle is included with this tripod system.

Q: 4. What size are the threads on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 5. is this a video Tripod?

A: Yes, this is a Video Tripod with a fluid head.

Q: 6. What is the folded length of just the tripod legs without the head on it?

A: The folded length of the E-Image EK630 Professional Compact Tripod with Fluid Head legs is 30.7".

Q: 7. What size is the thread on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 8. Will a manfrotto 501 plate be compatible?

A: We're afraid not. This system is compatible with the E-Image EH6P Quick Release Plate, BH #EIEH6P.

Q: 9. What is a mini Euro plate quick-release? Arca-swiss? Manfrotto?

A: This uses the Camgear WP-2 Wedge Plate, which is in the Mini Euro Style. It is not compatible with Arca-Swiss or Manfrotto plates. It is a propitiatory quick release system to the Camgear head.https://bhpho.to/2C6zt06

Q: 10. What are the dimensions of the pan bar (length and diameter) when full collapsed?

A: The pan bar itself (not the thicker section near the clamp and not the grip handle) of the OZEN Agile 5S S-Loc 75mm Fluid Head (B&H# OZAG5S) is approximately 3/4" (19mm) in diameter. The length of the pan bar including both the thicker section (where it starts) until the bottom end of the grip handle is approximately 15" (38cm) in length when measured from the start, to the elbow bend, and then from there to the opposite end of the pan angled bar.

Biao	24/09/2024
[Quick Release] The best solution with a low budget 5

David	11/09/2024
[Fluid Head] Perfect companion to the Sachtler Flowtech 75 sticks. Great fluid head especially for the price. 5

Ryan	11/07/2024
[Yes] If your a serious videographer or cinematographer and need a solid deal? no, need to spend $$$-$$$$ on a tripod set up! this is a goto quality tripod, hands down will get the job done right! The head is very fluid, with the right amount of tension, both pan and tilt; made of all metal housing and high density plastic knobs, this guy can take it! The legs!? the legs are as smooth as a silk dress on a hot lady! durable too, with independent inner leg adjustment The feet are removable and RUBBER! Awesome extendable tripod handle, adjust to get that sweet spot! Premium (seriously) handbag included, it would cost 50+ alone. 5

Austin	06/07/2024
[+90° to -80°] The Sachtler Ace XL is a great fluid head. I've used this it for over 2 years now. It's been used in the rain, snow, heat, traveled in countless check bags around the country, and it still works like the first day I bought it. It handles sony alpha series cameras to a red scarlet-w. I moved to this from a head without the ability counterbalance and it's a gamechanger. The Ace XL is nice and small but strong enough for most cameras. I definitely recommend Sachtler. 5

Aubrey	17/06/2024
[Yes] I've been using the Manfrotto 504HD for about 10 years or so, and it felt like it was not as responsive in terms of panning, but especially tilting. I did a lot of research and Sachtler Ace XL was the one that most of the videographers recommended at this price point. I put it on Manfrotto Carbon sticks, and man, what a difference in every aspect! Tilting and panning are silky smooth, but most of all, the WEIGHT!!! The 504HD I never realized how HEAVY it was until I started using this Sachtler. Of course, my additional Carbon sticks are super lightweight, which made it even nicer! I would highly recommend this fluid head if you want to 'upgrade' from Manfrotto fluid heads within this price range. You will not be disappointed. 5

Maria	09/06/2024
[Fluid Head] Sturdy! Well built. 5

Hiroshi	26/05/2024
[Yes] I changed my camera from Canon DSLR to Sony mirrorless. I also considered FSB4 to be lighter than the FSB8 fluid head that I was using, but I found this ACE-XL head and purchased it. I am trying to reduce the weight by attaching this head to a Gitzo type 3 tripod. This is 1kg lighter than the FSB8, yet the payload is 8kg. Even with the combination of 600mm F4 + A9, it still works with a great balance. 5

Alex	03/05/2024
[Fluid Head] This is a great fluid head at a reasonable price. I've used Sachtler heads for a few years now and they are definitely an improvement from your standard Manfrotto heads. I highly recommend the ACE XL because it can carry a decent payload in a compact, ergonomic, and rugged form factor. I use it with the Manfrotto 535 legs and an FX6, Ninja V, and wireless transmitter on top most of the time and this handles it like a champ. 5

John	21/04/2024
[Yes] Very impressed with this fluid head. My previous fluidhead was not the smoothest but the Sachtler Ace XL is very smooth with numbered resistance settings for both panning and tilting. It also has a tension setting that helps prevent your equipment from falling forward or backward when attaching them. One thing to check before purchasing. Will it fit your tripod? I have a Gitzo Tripod with a 75mm plate. This fluid head needs a 75mm bowl head adaptor. This is a drop in for Sachtler tripods. 5

TODOR	09/04/2024
[Fluid Head] absolute Chinese copy of Sachtler just better,yes Sachtler is made in Dominican Republic REGION this one in china,for small cameras is killer,head is extremely smooth ,only the caring case is its so,so. 5