Extend the original 5/8" mounting pin on your ArmX1 with this SmartSystem Arm Post 5/8" Mounting Pin for ArmX1from SmartSystem. This durable mounting pin replaces the original pin and provides a longer 3.5" long pin with a 5/8" diameter for your gimbal rig mount.

5/8" Diameter Post for ArmX1    Post Pin Sticks out 3.5"    Mount/Unmount Rig Quickly onto Post    Durable Metal Construction

Related Questions and Answers

Q: 1. Hi I have a Tiffen master series arm and Djı ronin 2 Which size should I take?

A: From what I can gather, this unit will not fit a master series arm.

Q: 2. Hi is the steadicam Volt mounting bracket included?

A: The SmartSystem Matrix One Chimera Bundle (V-Mount) (B&H# SMART8563) comes with the hardware to mount a Steadicam Volt directly on the top stage. It's also possible to mount it under the top stage junction box, but the bracket to mount it in that way is not included. You can see the former option in the middle of this graphic, and the latter method on the left: https://bit.ly/3TyI7IB

Q: 3. The CineMilled steadicam arm post adapter: Will this adapter work with Movi Pro - for Steadycam arm post?

A: Yes, this will work with the Movi Pro. The Movi Pro has a 30mm bar, which is the proper size for this adapter.

Q: 4. Hi i have an SK steadicam vest and i want to use it with the cinemilled armpost adapter and i want to know wich hole size i have to choose..!?

A: Unfortunately, neither we or CineMilled have heard of the SK Steadicam vest . We therefore ask you contact the manufacturer and then CineMilled with that information so that the proper adapter can be selected.

Q: 5. The glidecam x-10 has a 21.5mm pin. The description includes the X-10 but the nearest listed sizes are 7/8" and 3/4" (22.22mm and 19mm respectively). Can you confirm if this adapter comes with a shim for a 21.5mm pin or is the 7/8" close enough to work without slop/wobble?

A: No, the GyroVu Universal DJI Ronin-M/MX to Vest Arm Post Adapter does not come with a shim. We have the Glidecam X-10 Dual Support Arm Stabilizer Vest System listed as using a 5/8" Junior pin for mounting.

Q: 6. Does it come with the r2 or does that have to be bought separately?

A: Hi! The R2 sled as R2 bundle don't include the Ronin R2.

Q: 7. Do you have an estimate on when these units from Cinemilled might be arriving? I'm from Canada, so the pre-ordering process doesn't work as well for me based on shipping prices. Thanks in advance!

A: Sorry, but we do not have a date of arrival for these units. Hopefully soon.

Q: 8. What's the difference from the Extreme and the Pro version?

A: The monitor LCD holder is on separate rods on the Matrix Sled Extreme making it more stable. You also get some more adjustment options as to where you want to place the monitor.

Q: 9. Does this fit a 19 mm adapter on Flycam Comfort Stabilizing Arm & VestCMFT-AV?

A: Yes,This will work with 19mm post adapters.

Q: 10. Will this work with the Glidecam x-22?

A: Hello there...The best thing to do would be to phone Cinemilled Customer service and ask them if one of their adaptors would fit the X-22 system; it all comes down to whether or not the X-22 armpost fits the Cinemilled adaptor. I have done a fair bit of research on this for my Glidecam X-10 system and subsequently bought the Cinemilled 7/8 armpost adaptor. The 7/8 adaptor is the recommended (by Cinemilled) hardware for the X-10/DJI Ronin combo. If the armpost for Glidecam arms are all the same then you're good to go with the 7/8 however; since the X-22 supports a heavier payload (10-25lbs) than the X-10 (13lbs), it may very well use a larger post and a different size adaptor. Hey, if the forums have nothing so far the manufacturer would know for sure; all I can say is that once you find the right adaptor, it's a very impressive rig...hope this is helpful!