Use the SmartSystem J-Bracket for 5/8" Post | Durable Mounting Solutionfrom SmartSystem J-Bracket for 5/8" Post | Durable Mounting Solutionto mount a 5/8" component on your stabilizer. Compatible with select stabilizer arms and sleds, this bracket provides a female 5/8" hole and a 5/8" post with a locking pin for added security.

For Select Gimbal Arms and Sleds    Male & Female 5/8" Adapters, Locking Pin    For SmartSystem Arm X1    For GPI PRO Titan & Atlas Arms    For FlowCine xArm    For Steadicam Arms with 5/8" Arm Post    For SmartSystem Matrix Sleds/New Handle    For Betz Tool Rig Sled

• SmartSystem Arm X1
• PRO GPI Titan and Atlas Arms
• FlowCine xArm
• Tiffen Steadicam arms with 5/8" arm post

Related Questions and Answers

Q: 1. Can I use this upside down? Having the vibration absorbing part facing down.

A: Yes, the PTZCam Vibration Insulating Hardware with Mounting Bracket can be installed onto a wall or ceiling in upright or inverted positions.

Q: 2. Is there a bracket for the PX-RN receiver for the Nikon SB-700? It looks like the bracket supplied here is only for the SB-900 and SB-800.

A: The RadioPopper PX Receiver Mounting Bracket and Base included with this receiver can also work with the SB-700.

Q: 3. Is this compatible with ptzoptics ptz cameras?

A: The manufacturer defines the product as being compatible with most PTZ cameras but does not explicitly state any brands or models supported.

Q: 4. I’m looking to mount my canon r5 above my mamiya rz67 to capture video of the waist level viewfinder. Along with a cage on the r5, will this do the trick?

A: The DigitalFoto Solution Limited R180 L-Shaped Vertical Clapper Bracket (7.1") is made to fit one camera. Unfortunately, it will not accept two cameras. It is too small for two cameras.

Q: 5. Will this work with a Sony FX9 camera and a manfrotto camera plate attached to the tripod?

A: The DigitalFoto Solution Limited R180 L-Shaped Vertical Clapper Bracket (7.1") should be able to support the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (B&H # SOPXWFX9) and a Manfrotto quick release plate on a tripod.

Q: 6. What's the difference from the Extreme and the Pro version?

A: The monitor LCD holder is on separate rods on the Matrix Sled Extreme making it more stable. You also get some more adjustment options as to where you want to place the monitor.

Q: 7. What is the largest monitor it can accomodate?

A: Since you are mounting onto the gimbal, we don't recommend going over 7" as anything bigger than that can become cumbersome on the gimbal. The weight of the monitor you choose to use also matters.

Q: 8. Are the mounting screws included? It's unclear based on reviews and specs (indicating yes).

A: Yes. The DigitalFoto Solution Limited R180 L-Shaped Vertical Clapper Bracket (7.1") includes both a 1/4"-20 and 3/8"-16 mounting screw.

Q: 9. Sorry, I should have rephrased my question. Will it hold my heavy duty, 20 lb. FS7 rig at a 90 degree angle so I can shoot 9:16?

A: Yes, the DigitalFoto Solution Limited R180 L-Shaped Vertical Clapper Bracket (7.1") can hold the Sony FS7 as long as the camera and lens combined are not more than 46 lbs. Note it might slip a bit/ twist on the plate. That is a lot of weight if used vertical.

Q: 10. What is the weight capacity on this sled?

A: Every sled was designed to maximize the payload of ArmX1. The ultimate payload of ArmX1 is 34kg (75lbs). The total weight that the Matrix gimbal can handle is 34 kg / 75 lbs.