Etc Source Four Parnel Lighting Fixture

Product Code: eq8081
Availability: In Stock

$1,950.00 $2,886.00

Qty

6 reviews Write a review

Description
Reviews (6)

The introduction of the ETC Source Four PARNel Lighting Fixtureby ETC Source Four PARNel Lighting Fixturepresents a unique luminaire with the compactness of a PAR and performance of a Fresnel. The

PARNel's wave-lens design renders a very even beam output with a 24 - 47° spot-to-flood range. It features die-cast construction and utilizes efficient HPL tungsten lamps up to 750W.

The aluminum housing is supported by a steel yoke tapped with holes for stand or ceiling mounting. The fixture supports ETC's Dimmer Doubling technology which allows you to double the number of fixtures in your system without adding dimmer modules or running additional cable. The PARNel has three-conductor 36" leads in a glass fiber outer sleeve. No plug is included.

750W Maximum Wattage Uses Efficient HPL Compact Tungsten Lamp 115-240VAC, 50/60Hz Patented Wave Lens System 24 - 47° Field Angle Die-cast Aluminum Construction Computer-designed Faceted Reflector ETC Dimmer Doubling Technology Gel Frame

Parameters
Rating	750W
Socket (Lampholder)	G9.5 Heat sink
Lens (Condenser)	2x Borosilicate glass lenses: 1x fixed wave clear, 1x rotatable wave stippled
Reflector	Parabolic, multifaceted reflector
Mount	3x Taps for ceiling or stand mounting
Focusing	24 - 47° spot to flood adjustment
Yoke	Steel yoke with two mounting positions
Cable	3-Conductor 36" (91.4 cm) leads in glass fiber outer sleeve
Power Requirements	115-240VAC, 50/60Hz
Dimensions	Including yoke: 15.9 x 10.3 x 10.8" (40.4 x 26.2 x 27.4 cm)
Weight	8.0 lb (3.6 lb)
Packaging Info
Box Dimensions (LxWxH)	12 x 11 x 11"

Rugged die-cast aluminum construction

High-impact, thermally insulated precision focus knob

Sealed reflector housing

Reflector temperature control through integral heat sink fins

Gel frame holders with two accessory slots

Top-mounted, gel-frame retainer

Steel yoke with two mounting positions

Positive locking yoke clutch

UL and cUL Listed

Patented wave lens system

Two heat resistant borosilicate glass lenses

One fixed wave clear lens and one rotatable wave stippled

lens installed

Tool free front lens changing

Thermally insulated lens ring

HPL compact tungsten filament contained in a krypton/xenon-filled quartz envelope

750W maximum

Patented filament geometry makes for extremely efficient

light collection and transmission

Integral die-cast aluminum heat sink lamp base

115-240VAC, 50/60Hz

High-temperature three-conductor 36" leads in a glass fiber

outer sleeve

ETC's Dimmer Doubling technology allows you to double the number of fixtures in your

system without adding dimmer modules or running additional cable. The key to this system

is the Dimmer Doubler.

The Dimmer Doubler is installed between a Sensor dimmer module and two ETC Source

Four 77 volt fixtures. It splits the output of a single dimmer into two, separately-controlled

outputs. You can then use an ETC control console to independently control the output of

the two fixtures.

Spot 24°

Beam angle: 12°, field angle: 24°

Candela: 190,390

Field lumens: 9,135

Beam lumens: 4,610

Efficiency: 41.7%

Lumens per watt: 12.2

476 fc/5,123 lux @ 20' (6.1 m) with field diameter of 8.4' (2.6 m)

155 fc/1,673 lux @ 35' (10.7 m) with field diameter of 14.7' (4.5 m)

76 fc/820 lux @ 50' (15.2 m) with field diameter of 20.9' (6.4 m)

53 fc/569 lux @ 60' (18.3 m) with field diameter of 25.1' (7.7 m)

Flood 47°

Beam angle: 29°, field angle: 47°

Candela: 47,050

Field lumens: 10,560

Beam lumens: 6,440

Efficiency: 48.2%

Lumens per watt: 14.1

471 fc/5,065 lux @ 10' (3.0 m) with field diameter of 8.7' (2.6 m)

209 fc/2,251 lux @ 15' (4.6 m) with field diameter of 13' (4.0 m)

118 fc/1,266 lux @ 20' (6.1 m) with field diameter of 17.3' (5.3 m)

52 fc/563 lux @ 30' (9.1 m) with field diameter of 26' (7.9 m)

Related Questions and Answers

Q: 1. Does this light come with a stage pin power connection option?

A: The ETC Source Four PARNel stage pin connection model is no longer available.

Q: 2. reviews of etc4?

A: Unfortunately, none of our customers have reviewed this product yet. Please check back periodically for any updates.

Q: 3. Can you order barn doors for this?

A: You could use these barndoors with that light. https://bhpho.to/2Iuk4Y9

Q: 4. can i attach a chimera pancake lantern to this fixture? like this one? a href= http://www.bhphotovideo.com/c/product/218658-REG/Chimera_1874_Pancake_Lantern_Softbox.html target= _blank http://www.bhphotovideo.com/c/product/218658-REG/Chimera_1874_Pancake_Lantern_Softbox.html/a

A: No, that light is not designed to be used with a softbox.

Q: 5. Does this unit come with a lens tube?

A: Unfortunately, this fixture does not include a lens tube. One such lens tube that can be used is the ETC Enhanced Definition Lens Tube for Source 4 Black Ellipsoidals, Black - 50 Degrees B&H # ET450EDLTB. An image is shown below for reference.

Q: 6. IS THERE A MANUAL FOR THE -ETC CS20 ?

A: There is. It can be found on ETCs website.

Q: 7. What degree is the barrel?

A: The ETC Source Four LED Series 2 Lustr with Shutter Barrel (Black) BH #ETS4LEDS2SBL does not come with a lens tube. It only has a shutter barrel.

Q: 8. Can the LED be changed out when the lifespan is up?

A: The LED array in the ETC Source Four LED Series 2 Lustr is not user-replaceable. The unit would have to be returned to ETC if replacement of the LED array is required.

Q: 9. What globe does it take please? Thank you so much!

A: You can use one of these HPL lamps https://bhpho.to/2Mn03Wp.

Q: 10. What moving lights do you recommend to go with this?

A: The ETC CS20 20-Fader ColorSource will adapt to any 5‑pin DMX connection. We usually suggest the following unit that makes a great pair American DJ Focus Flex L7 RGBW LED Moving Head with Pixel Effects BH #AMFOCUSFLXL7 • MFR #FOCUS FLEX L7 https://bhpho.to/3Rv2rd6

Will	03/09/2024
[750W] Works flawlessly - the focus is sharp, the flags cut the light just as needed, it's built very solidly, and it puts out a ton of light with just a 575w bulb. Worth every penny. We are a mobile church and we used just four of these as the backbone of our lighting setup for Sundays, and needed the lighter weight. As far as output, we don't have to put them up above half to get the light we need. Concerning control, we are able to keep the light extremely controlled, specifically keeping it off the projection screen, which is right above the singers heads. Because of this, we were able to maximize our projector's output lumens and not have to overcompensate with it, or compromise on scene brightness. We couldn't be happier with the purchase. 5

Chadnozza	28/07/2024
[8.0 lb (3.6 lb)] Pop it in the gel frame holder at the front of the light. You'll still be able to use a gel frame in the space behind or in front, or a top hat in front of it (the donut and top hat together really clear up the image), though you can't have all three at once - there's only two slots in the mini's frame holder. 5

Ing bardo	24/07/2024
[12 x 11 x 11"] Excelent product 100 % Good , for stages!! 5

Ronald	05/07/2024
[750W] quality products 5

Tyler	02/07/2024
[750W] It's pretty obvious that and ETC Source Four is the best type of leko out there. Well built and overall a good product. The Jr. is great to fit in the small space I had to install these in. 5

Ceslinger	19/05/2024
[G9.5 Heat sink] I just installed 2 of these in one of the kids rooms at our church. They are solid and reliable and work exactly like they should. I do wish they came with bulbs but that's not a huge deal to me. 5