The light beige Countryman B6 Omni Lavalier Mic for CAD Audio Wireless Transmittersfrom Countryman B6 Omni Lavalier Mic for CAD Audio Wireless Transmittersis a very small lav microphone measuring one tenth of an inch in diameter. It can be used to capture audio for theater, broadcast, house of worship, and general lavalier applications.

This version offers the highest gain for general speaking such as in presentations or sermons. Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in a performer's hair or on costumes, ties, or behind a shirt button. It can also be attached to eyeglasses, for a secure, discreet, and convenient alternative to hair miking. The ultrathin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's aramid-reinforced cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

Additionally, the included swappable protective caps let you shape the frequency response for different situations or to match other microphones. The B6 is resistant to makeup, sweat, and moisture when used with a protective cap, which can be quickly removed for cleaning or replacement.

For Theater, Live Stage & Studio Use    Hardwired Connector    Fits CAD Audio Transmitters    TA4F (CA), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Most Uses    Includes Windscreen & Cable Clips    Includes Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Standard, for most uses.

Related Questions and Answers

Q: 1. Can you use a second GXLIEM4 to have 8 monitor mixes? Will it have interferace?

A: Yes, it is possible to use two CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring Systems simultaneously in order to have eight monitor mixes. Additionally, if you only need four mixes, you can add more receivers to one system and set them to listen to any of the four channels. There is no limit for the number of receivers that can be used with one system or any of its individual channels.

Q: 2. Can I buy extra body packs to connect to the quad mix system and just use it on the same channel as one of the other four body packs?

A: Yes, you can add additional CAD GXLIEMBP Bodypack Receiver with MEB1 Earbuds units to work with the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System.

Q: 3. Are the inputs (1/4" mode, each side) stereo or mono jacks?

A: The CAD CX2 Connect II 2x2 USB Audio Interface has two separate input channels which each have an XLR-1/4" TRS combo jack. This type of input connection can be used with XLR or 1/4" connectors. Each input is mono, but you can create stereo audio by connecting microphones, instruments, or line level devices to both inputs.

Q: 4. Can these transmit audio while recording a backup at the same time?

A: Yes, the Comica Audio CVM-WM200A PRO 2-Person Camera-Mount Wireless Omni Lavalier Microphone System can transmit audio while simultaneously recording backup audio files.

Q: 5. The XLR output cable in the picture only show one connector, is possible to have two sepparate XLR outputs to be recorded in two sepparate tracks on Zoom H6? That 3.5mm to dual XLR cable comes in the box?

A: That's because the receiver only has one output. It comes with a 3.5mm to 3.5mm and a 3.5mm to XLR.

Q: 6. How can i know what kind of off brand lavalier microphone can be screwed in this transmitter?

A: The Comica Audio CVM-WM200C PRO transmitter is compatible with lavalier microphones which have Sennheiser-style locking connectors.

Q: 7. Does CAD Cx2 work with the band lab?

A: Although we have not tested it, the CAD CX2 Connect II 2x2 USB Audio Interface should work with BandLab Cloud Digital Audio Workstation. The interface is compatible with almost any recording software on Windows or Mac laptop or desktop computers.

Q: 8. Are the inputs stereo TRS? Do the receivers receive and output audio in stereo?

A: No, the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System provides mono audio input and output. The inputs on the transmitter base are 1/4" TS and the receivers have a 3.5mm TRS headphone output connection for dual mono audio so you will hear the same audio through both ears.

Q: 9. Not clear from the two different answers given so far. Is it possible to have the two mics output separately as L and R audio channels?

A: Yes it is possible as It is switchable, so you can have one in each channel (mono) or stereo.

Q: 10. Can I get a replacement mic for this unit?

A: The Comica Audio CVM-M-O1 Omnidirectional Lavalier Microphone for Comica and Sennheiser Wireless Transmitters, BH #COCVMMO1 is the replacement lavalier mic for this wireless system.