Offered here in gray, the Leo 2.0 Tripod with AirHed Pro Ball Head - Grayfrom Leo 2.0 Tripod with AirHed Pro Ball Head - Grayprovides a dynamic support system that features three detachable legs and a removable center column. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" in height.

Tripod heads such as the AirHed Pro Lever Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Leo 2.0 Tripod. When combined and configured as a tripod, the Leo 2.0 Tripod and AirHed Pro Lever Ball Head supports up to 66 lb and measures 14.7" when folded. Each of the tripod's 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Leo 2.0 Tripod and AirHed Pro Lever Ball Head can be set at a minimum height of 8.2" when the tripod's 2-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 44.1" or 57.7" with the center column fully raised along with the ball head. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Leo 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

The AirHed Pro Lever Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by using the clamp's push-and-pull cam lock lever. When opened, the lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right- or left-handed user.

Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Load Capacity: 66 lb    Max Height: 57.7", Min Height: 8.2"    Folded Length: 14.7"    Leg Sections: 5, Weight: 4.1 lb    Carbon Fiber Legs, Bubble Level    Twist Locks, Rubber Feet    3-Position Leg Angle Locks    Reversible, Multi-Section Rapid Column    Monopod-Convertible Legs and Column    AirHed Pro Lever Ball Head, Arca-Type

• Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount
• Tripod features three detachable legs and removable center column
• With ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" height
• Tripod configuration with ball head supports up to 66.0 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column D-ring to accommodate ballast for additional stability
• Can be set for a minimum height of 21.7" or 8.2" without the center column
• With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 44.1" or 57.7" with the center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
• Legs can be locked at 22, 55, or 80° angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Weighs 4.1 lb and measures 14.7" when all three legs are reversed 180° and folded
• Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
• Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
• 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
• Ball head microfiber bag
• Tripod kit carry bag with strap for storage and transport

• Arca-type ball head with 88 lb load capacity
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob with knurled surface allows head to rotate 360°
• Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
• Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp
• When opened, cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right or left-handed user
• Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
• Durable magnesium alloy construction

• Compatible with Arca-type quick release clamps
• 1/4"-20 mount
• Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Lever Ball Head
• Durable, aluminum alloy construction

Related Questions and Answers

Q: 1. will it fit on my manfrotto tripod?

A: While you did not list the model of the tripod you own for confirmation, if your tripod has a male 3/8"-16 threaded screw on the center column of your tripod, then yes, it would be compatible for use with the 3 Legged Thing AirHed Pro Lever Ball Head.

Q: 2. How do you convert it to a boom?

A: The center column of the 3 Legged Thing Charles 2.0 Darkness Magnesium Alloy Tripod with AirHed Pro Ball Head does not turn into a boom arm. One option would be to add this Sirui HA-77 Horizontal Arm to it and then the Sirui would be a boom arm. https://www.bhphotovideo.com/c/product/1325160-REG

Q: 3. Can it hold heavy lenses like Nikon 200-500 with nikon 6?

A: Yes, it supports 66lbs.

Q: 4. What are the diameter of the Graphite legs ? Layers?

A: As per our measurement, the thickest leg section measures around 2 7/8" inches.

Q: 5. Will this head slightly shift direction as you tighten the ball, especially when using long focus heavy lenses (for which this head is rated)?

A: once the ball head adjustment knob is in the locked position, the head will hold up to 30kg from top-down in a secure and stabile position.

Q: 6. Does the folded length of 14" include the ball head this comes with?

A: The 14" folded length measurement of the 3 Legged Thing Punks Corey 2.0 Magnesium Alloy Tripod with AirHed Neo 2.0 Ball Head (Matte Black) includes the ball head.

Q: 7. Will this work with a ProMedia Gear L Bracket?

A: Yes the 3 Legged Thing AirHed Pro Ball Head is Arca Swiss compatible so it will fit a Pro Media Gear L Bracket.

Q: 8. What is the diameter of the bottom of the base of this ballhead ??

A: 38 mm / 1.49 "

Q: 9. Would this work with an L bracket?

A: Yes, this Arca Swiss head is compatible with Arca Swiss compatible L brackets.

Q: 10. Could I use a Wimberley gimbal head (wh-200) with this?

A: The 3 Legged Thing Winston 2.0 Tripod Kit with AirHed Pro Ball Head (Gray) is sturdy enough to use the Wimberley WH-200 Gimbal Tripod Head II with Quick Release Base.