The blue 3 Legged Thing AirHed Pro Ball Head Bluefrom 3 Legged Thing AirHed Pro Ball Head Blueis an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Load Capacity: 88 lb    360° Pan with Independent Lock    Up to 90° Portrait Angle Tilt    Arca-Type Compatible Clamp    Built-In Bubble Level    Magnesium Alloy Construction    QR-OCTA Quick Release Plate    1/4"-20 Mount, Non-Slip Surface

• Arca-type ball head with 88 lb load capacity
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob with knurled surface allows head to rotate 360°
• Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
• Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
• Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
• Durable magnesium alloy construction

• Compatible with Arca-type quick release clamps
• 1/4"-20 mount
• Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head
• Durable, aluminum alloy construction

Related Questions and Answers

Q: 1. Can it hold heavy lenses like Nikon 200-500 with nikon 6?

A: Yes, it supports 66lbs.

Q: 2. Could I use a Wimberley gimbal head (wh-200) with this?

A: The 3 Legged Thing Winston 2.0 Tripod Kit with AirHed Pro Ball Head (Gray) is sturdy enough to use the Wimberley WH-200 Gimbal Tripod Head II with Quick Release Base.

Q: 3. Does this come with a bag/Tripod case?

A: Yes. The unit comes enclosed with the following items 3 Legged Thing Legends Ray Carbon Fiber Tripod (Bronze) 3 Legged Thing Toolz Multi-Tool Anodized Magnesium Alloy D-Ring Cushioned Carrying Case Limited 5-Year Warranty 3 Legged Thing AirHed Vu Ball Head (Blue) QR-OCTA Quick Release Plate 1/4"-20 Stagsden Camera Bolt Limited 5-Year Warranty

Q: 4. Will this work with a ProMedia Gear L Bracket?

A: Yes the 3 Legged Thing AirHed Pro Ball Head is Arca Swiss compatible so it will fit a Pro Media Gear L Bracket.

Q: 5. Sorry for the dumb question, is this waterproof?

A: The 3 Legged Thing Legends Ray Carbon Fiber Tripod with AirHed Vu Ball Head Set is not waterproof.

Q: 6. What is the overall height of this ballhead?

A: 3 Legged Thing AirHed Pro Ball Head height is 88mm/3.46''.

Q: 7. What is the size of the plate and how it mounted to camera?

A: The arca-swiss plate provided with the 3 Legged Thing AirHed Vu ball head is 38mm / 1.5" in width and screws into your camera's mounting point via the 1/4"-20 screw on the plate.

Q: 8. Is this solid enough to use with a benro gimbal head?

A: The 3 Legged Thing Leo 2.0 Tripod Kit with AirHed Pro Lever Ball Head (Bronze and Blue) is sturdy enough to use with a gimbal head.

Q: 9. What is the diameter of the bottom of the base of this ballhead ??

A: 38 mm / 1.49 "

Q: 10. Can I screw the leg (using it as a monopod) into the Siriu l-10 monopod head? The thread size for the l10 is 3/8".

A: With the 3 Legged Thing Winston 2.0 Tripod Kit with AirHed Pro Ball Head the leg gets screwed directly into the center column to turn it onto a monopod. You could use the Sirui L-10 Monopod Tilt Head on the top of the center column.