The gray 3 Legged Thing AirHed Pro Ball Head Grayfrom 3 Legged Thing AirHed Pro Ball Head Grayis an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°.

Load Capacity: 88 lb    360° Pan with Independent Lock    Up to 90° Portrait Angle Tilt    Arca-Type Compatible Clamp    Built-In Bubble Level    Magnesium Alloy Construction    QR-OCTA Quick Release Plate    1/4"-20 Mount, Non-Slip Surface

• Arca-type ball head with 88 lb load capacity
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Secondary locking knob with knurled surface allows head to rotate 360°
• Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
• Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
• Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
• Durable magnesium alloy construction

• Compatible with Arca-type quick release clamps
• 1/4"-20 mount
• Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head
• Durable, aluminum alloy construction

Related Questions and Answers

Q: 1. Will this work alright with the nikon z5?

A: Yes, the 3LT Punks Corey 2.0 will work with the Nikon Z5 mirrorless camera.

Q: 2. Could I use a Wimberley gimbal head (wh-200) with this?

A: The 3 Legged Thing Winston 2.0 Tripod Kit with AirHed Pro Ball Head (Gray) is sturdy enough to use the Wimberley WH-200 Gimbal Tripod Head II with Quick Release Base.

Q: 3. What is the size of the plate and how it mounted to camera?

A: The arca-swiss plate provided with the 3 Legged Thing AirHed Vu ball head is 38mm / 1.5" in width and screws into your camera's mounting point via the 1/4"-20 screw on the plate.

Q: 4. Can I screw the leg (using it as a monopod) into the Siriu l-10 monopod head? The thread size for the l10 is 3/8".

A: With the 3 Legged Thing Winston 2.0 Tripod Kit with AirHed Pro Ball Head the leg gets screwed directly into the center column to turn it onto a monopod. You could use the Sirui L-10 Monopod Tilt Head on the top of the center column.

Q: 5. Will this work with a ProMedia Gear L Bracket?

A: Yes the 3 Legged Thing AirHed Pro Ball Head is Arca Swiss compatible so it will fit a Pro Media Gear L Bracket.

Q: 6. will it fit on my manfrotto tripod?

A: While you did not list the model of the tripod you own for confirmation, if your tripod has a male 3/8"-16 threaded screw on the center column of your tripod, then yes, it would be compatible for use with the 3 Legged Thing AirHed Pro Lever Ball Head.

Q: 7. Can I use this with the iFootage CB3 C180F monopod base? also, is it strong enough to handle a Sony FS5 (weight 10 lb)?

A: Yes, the 3 Legged Thing AirHed Pro Ball Head (Matte Black) is compatible with the iFootage CB3 C180F Carbon Fiber Monopod with Mini Tripod Base, and it would be more than strong enough to handle the 5-lb Sony FS5 (including a lens).

Q: 8. How do you convert it to a boom?

A: The center column of the 3 Legged Thing Charles 2.0 Darkness Magnesium Alloy Tripod with AirHed Pro Ball Head does not turn into a boom arm. One option would be to add this Sirui HA-77 Horizontal Arm to it and then the Sirui would be a boom arm. https://www.bhphotovideo.com/c/product/1325160-REG

Q: 9. Does the folded length of 14" include the ball head this comes with?

A: The 14" folded length measurement of the 3 Legged Thing Punks Corey 2.0 Magnesium Alloy Tripod with AirHed Neo 2.0 Ball Head (Matte Black) includes the ball head.

Q: 10. Will this head slightly shift direction as you tighten the ball, especially when using long focus heavy lenses (for which this head is rated)?

A: once the ball head adjustment knob is in the locked position, the head will hold up to 30kg from top-down in a secure and stabile position.