The black Countryman E2 Unidirectional Earset Microphone Hirose 4-Pin Connectorfrom Countryman E2 Unidirectional Earset Microphone Hirose 4-Pin Connectoris an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with Audio-Technica wireless microphone systems. It provides suitable isolation at the mouth, but with less visibility than an E6 omni earset, and can be used to capture audio for loud speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The detachable cable terminates to a Hirose 4-pin AN cH-Style connector for direct connection to an Audio-Technica 4000 Series, 5000 Series, or 7000 Series bodypack transmitter.

For Audio-Technica Wireless Transmitters    20 Hz to 20 kHz Frequency Response    For Loud Speaking and Vocals    Fits over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Lower gain, for powerful vocals requiring the highest overload.

Related Questions and Answers

Q: 1. What is the "length" of the padded section of the Hand Strap?

A: The length of the padded section is 4.75" at its longest and it is about 2" wide at its widest.

Q: 2. Does this work with the lectrosonics ucr411a receiver?

A: The Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable may not work with the Lectrosonics UCR411a Digital Hybrid Wireless Compact Receiver because of the locking DC plug on the cable. You will want to use a cable with a non-locking DC connector like the Lectrosonics PS-12 Power Cable - Coaxial Style to Hirose 7-4 pin (Betacam) Plug (B&H # LEPS12).

Q: 3. can I use this with sony pxw-x70. is this too short??? Some thing else better than this mic.Sony ????

A: This mic would be compatible with the Sony PXW-X70. There are many others that would also be compatible, however the correct mic would depend on your particular needs.

Q: 4. Can this be used with a battery grip attached?

A: Yes that hand strap will work with a DSLR attached to a grip.

Q: 5. Is the thread on the stand mount 5/8 or 3/8?

A: The one that I recieved was 5/8

Q: 6. can this cable work to connect power to the Zoom F8pro audio recorder to the SmallRig NP-F Battery Adapter Plate Lite for BM4K?

A: The locking DC barrel connector on the Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable may not connect properly to the SmallRig L-Series Battery Adapter Plate Lite, which uses a non-locking DC connector. As a better option, the CAMVATE DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders (B&H # CAC2725) should be a better match to do the job.

Q: 7. How does this differ from my mic150 shotgun mic?

A: The Panasonic MIC150 has a frequency response of 80 Hz to 16 kHz whereas the Panasonic AG-MC200G has a frequency response of 160 Hz to 20 Hz.

Q: 8. Is this mic also compatible with the Sony PXW-Z150 4K ?

A: Yes, it is a standard XLR connected mic, the model you mentioned has 2 XLR inputs. This will also work with any other equipment that has XLR, so it can be very useful for other equipment too.

Q: 9. how would this compare to MKE 600 or AT875R ?

A: In terms of specifications, the three mics do have differences in the way they perform, how they are powered, as well as in their physical size and features. The Panasonic AG-MC200G Unidirectional Microphone is 6.38" (162 mm) long and has a frequency response range of 160 Hz to 20 Hz, a maximum sound pressure level of 127 dB, a sensitivity level of -40 dB at 1 kHz, a signal-to-noise ratio of 69 dB, and operates using phantom power. The Audio-Technica AT875R Short Shotgun Microphone is 6.89" (175 mm) long and has a frequency response range of 90 Hz to 20 kHz, a maximum sound pressure level of 127 dB, a sensitivity level of -30 dB at 1 kHz, a signal-to-noise ratio of 74 dB, and operates using phantom power. The Sennheiser MKE 600 Shotgun Microphone is a longer mic that can operate using either phantom power or a single AA battery and it has a selectable low-cut filter at 100 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic. The MKE 600 is 10.08" (256 mm) long and it has a frequency response range of 40 Hz to 20 kHz, a maximum sound pressure level of 132 dB when using phantom power and 126 dB when using battery, a sensitivity level of 21 mV/Pa with phantom power and 19 mV/Pa with battery power, and a signal-to-noise ratio of 79 dB with phantom power and 78 dB with battery power. The frequency response range is the output range for the audio that the mic is able to reproduce and the maximum sound pressure level is the level of the loudest sounds that the mic can reproduce. The sensitivity rating is the amount of output gain for the input (a higher negative number indicates that the mic is less sensitive than a mic with a lower negative number), and the signal-to-noise ratio is the level of the desired sound compared to the unwanted noise (a higher number indicates a stronger audio signal with less noise).

Q: 10. What do I need to connect these mikes to a Zoom/MacMini teleconferencing system?

A: The Unidirectional Table Top Wireless Microphone from Revolabs is intended for use with Revolab's HD series wireless microphone and conference systems.