The Turbosound Manchester Series MS215 is a passive dual 15" vented bandpass subwoofer that's well suited for a broad range of speech and music sound reinforcement applications in both fixed, portable, and touring audio systems. Designed in conjunction with Lade DSP and Lab Gruppen amplification to provide optimal FOH performance as well as flexibility to readily adapt to varying venue requirements. The subwoofer can be ground stacked and features a four-point rigging system that allows for an array of multiple configurations.

The subwoofer can handle up to 4000W of peak power to drive the dual 15" neodymium woofers, which combine for a frequency response of 115 down to 40 Hz with a remarkable 143 dB SPL. The marine birch enclosure has been designed for low distortion and a musical bass signature. The steep cut-off slopes ensure an effective acoustic transition for use with MV212 line array modules. For low-frequency extension, the recommended cabinet ratio consists of one MS215 to one MV212. For reverse cardioid subwoofer configurations, multiples of three MS215 enclosures are recommended with two front-firing enclosures and one rear-firing enclosure. Additionally, a front-mounted NL4 connector is available for rear-firing cardioid operation.

The integrated suspension system is engineered to meet BGA-C1 specifications for suspending or ground stacking MS215 and MV212 modules. For speed and simplicity, custom engineered flybars and wheel boards are available as separate accessories. An integrated M20 threaded pole mount socket offers support to satellite speaker configurations. The 3/4" marine-grade Baltic birch enclosure is finished with a black polyurea coating and features a rugged powder coated steel mesh grille that's backed with reticulated foam. The rear panel offers three NL4 speakON connectors for input and link connections.

For Touring & Installation Applications    Cardioid Arrayable    2 x 15" Neodymium Woofers    Frequency Response: 40 to 115 Hz    4000W Peak Power Handling    3 x speakON NL4 Connectors    Ground Stack or Flown Deployment    Marine-Grade Baltic Birch Enclosure    Limited 10-Year Warranty

Cardioid-arrayable, vented bandpass dual 15" subwoofer for touring and installation applications

1000W continuous, 4000W peak power

Two 15" neodymium low-frequency transducers

Ergonomic 4-point suspension system allows rapid deployment in either orientation

Suspend up to 12 MS215 elements at 10:1 safety factor

Designed for suspension with MV212 and MV212-XV line array elements in mixed arrays

Seamless integration with Lab Gruppen amplifiers and Lake DSP for a complete system solution

Flexible cardioid configurations and electronic delay steering provide superior rear rejection and pattern control

Optimized tuning for extended low-frequency impact and accurate transient response

Integral runners and recesses combined with suspension system accessories facilitate secure ground stacking

Integral M20 threated pole-mount socket to support satellite speaker configurations

3/4" Baltic birch enclosure with extremely durable semi-matte black paint finish

Tour grade Neutrik speakON STX NL4 rear-panel connectors for input connection

Front-mounted NL4 connector for rear-firing cardioid operation

Limited 10-year warranty

Related Questions and Answers

Q: 1. How does both speaker connect?

A: They both connect with a wire that comes with them. It's not very long so if you want to put them far apart, you have to buy another one with the choice of your length. The speakers themselves are not very big as shown in the descriptive picture. They are around 18 inches in height

Q: 2. can you attenuate the output signal completely by turning the level controls completely counter-clockwise?

A: The input control is listed as input level, not a mute. It may still pass low level signal, even all the way down.

Q: 3. Is this speaker designed for 70V or normal 8Ohm amplification? Which is best if I am using 2 of them?

A: I think it needs an additional transformer purchase/install to use 70V.

Q: 4. What are flying mounting options? Are there any ceiling mounting kits available? Can this sub woofer be mounted together with the accompanying 12 or 15 PA speaker with specific. Hardware?

A: These are all of the mounting options for the Turbosound NuQ series that we carry:a href= https://www.bhphotovideo.com/c/search?ntt=115&refineSearchString=&ci=12214&fct=fct_brand_name%7Cturbosound&N=3992462167&ntt=nu& target= _blank https://www.bhphotovideo.com/c/search?ntt=115&refineSearchString=&ci=12214&fct=fct_brand_name%7Cturbosound&N=3992462167&ntt=nu&/a

Q: 5. How many Lux does this Produce?

A: Regarding the CAME-TV 4000W HMI Fresnel Light and Electronic Ballast, it is rated in lumens to be around 380,000 lumens.

Q: 6. Can these connect to a projector?

A: The Pyle Pro Dual High-Powered Active / Passive Speaker PA System. Will only work if the projector has a line out.

Q: 7. Do the rack mount plates come off?

A: No it doesn't come off. They are a continuous part of the front plate and not separate.

Q: 8. what is the safety factor with 1 TBV118l and 3 TBV123?

A: Thank you for your question. The fly bar can suspend up to four TBV123 elements or two TBV118L subwoofers in unique arrays, or one subwoofer and two elements in a mixed array with a safety factor of 10:1. We can not recommended or guarantee safety on a deviation of these formulas.

Q: 9. Is it cvompatible with electronic drums

A: This can be compatible with electronic drums if going into the speaker via 1/4'' mono connection, or an 1/8'' stereo mini connection.

Q: 10. Can these be used with a household stereo amp? Would like to you them with an outdoor theater setup.

A: Yes, you can use it with a stereo amplifier if you bypass the speaker outputs and go out of a line level output. This Pyle Pro speaker system has both line and auxiliary inputs.