The Turbosound Manchester Series MV212 is a passive, dual 12" 3-way, full-sized line array element that's well suited for a broad range of speech and music sound reinforcement applications in both fixed, portable, and touring audio systems. Designed in conjunction with Lake DSP and Lab Gruppen amplification to provide optimal FOH performance as well as flexibility to readily adapt to varying venue requirements. The line array element can be ground stacked and features a three-point rigging system that allows for an array of multiple configurations.

The MV212 is bi-amped with 2400W peak power to drive the two 12" woofers and 1520W to drive the two 1.4" dual-concentric coaxial compression drivers which combine for a frequency response of 20 kHz down to 50 Hz with a remarkable 149 dB SPL. Designed for speed and simplicity of use, custom-engineered flybars are available as separate accessories. The companion MS215 dual 15" subwoofer is specifically designed for use with MV212, providing additional low-frequency extension and impact for more demanding sound reinforcement applications.

The integrated suspension system is engineered to meet BGA-C1 specifications for suspending or ground stacking MV212 and MS215 modules. The 3/4" marine-grade Baltic birch enclosure is finished with a black polyurea coating and features a rugged powder coated steel mesh grille that's backed with reticulated foam. The rear panel offers two NL4 speakON connectors for input and link connections.

For Touring & Installation Applications    Full-Sized Passive 3-Way Design    Suspend up to 16 MV212 Elements    Two 12" Neodymium Woofers    Two 1.4" Coaxial Mid-Hi Drivers    Frequency Response: 50 Hz to 20 kHz    Two speakON NL4 Connectors    Ground Stack or Flown Deployment    Marine-Grade Baltic Birch Enclosure    Limited 10-Year Warranty

Full-size, passive 3-way line array element for touring and installation applications

Dual 12" low-frequency transducers with lightweight neodymium motors

2 x 1.4" coaxial neodymium mid-high compression drivers

Integral Dendritic Plane Wave Transformer (DPWT) waveguides for perfect line source coupling in the vertical plane

980W continuous, 3920W peak power

100° horizontal x 0 to 5° variable vertical curvature

3-way, bi-amplified operation

Seamless integration with Lab Gruppen amplifiers and Lake DSP for a complete system solution

Advanced linear phase FIR hybrid processing for exceptional sound quality

3-point suspension system with advanced ergonomic design for extremely rapid deployment and ease of use

Suspend up to 16 MV212 elements at 10:1 safety factor

Weather-resistant enclosure construction with durable semimatte black paint finish

Tour-grade Neutrik speakON STX NL4 connectors for input and link connection

Limited 10-year warranty

Related Questions and Answers

Q: 1. is this loud enough to be used for vocals in a band with an acoustic drum set?

A: Yes, the Pyle Pro system should be loud enough for vocals with a band that plays at a reasonable volume level, like for a small to medium size club or restaurant.

Q: 2. Want to replace Bose tall colum speakers with the Toa Array in a old Catholic church app. 160ft throw using a Crown CDI 1000 at 70 volts. will 2 do it or do I need 2 more to carry to the back of the church?

A: Two of these speakers will not carry all the way to 160', you may need two more half way in the church. if you have a layout for the church, please send it over to this e-mail, I will get you a design for the system, also did you think about Subs for the system? naji@nfscom.com

Q: 3. HiIs this lens fit to fg9x?

A: Hi DannyAbsolutely, It is a great lens that have 67mm thread, fits on the FG9X HousingYou should look at the Wideangle as well UWL-09 it is expensive but amazing resultsRegardsFantasea Line

Q: 4. can you use just one speaker?

A: The single active speaker can be as a stand-alone system, if desired.

Q: 5. Am I able to connect to a separate set-up of additional wireless and lav mics?

A: Ye. You may add your own wireless microphone receiver(s).

Q: 6. I have the fantasea housing for the canon G16. Does this lens fits?

A: Hi JoseThese items fits the FG16 but you will need a 67mm adaptor Item # 4702 EyeDaptor F Series - F67 / cat # 4702RegardsFantasea Lineinfo@fantasea.com

Q: 7. Can you separate the speakers? If I am not hanging them, what other accessories can I use say, if want 2 on each side (left and right over a sub)?

A: All four element are connected, with one input, they can't be separated. If you need two side, you would need one of the complete speaker on each side. We have multiple option for mounting these speakers, wall or ceiling, please refer to the web site for best mounting option. The sub that works well with these speakers is the FB-120B or W based on the color your are looking for.

Q: 8. Are they powered or passive?

A: Passive

Q: 9. What size sub woofer is good for this ?

A: An 18" powered subwoofer would be a good match for the 12" speakers included with the Pyle Pro PPHP1249KT Active + Passive PA System. The Pyle Pro system does not have an output for a subwoofer, so a powered sub could be a good solution.

Q: 10. Hi, I just want to make sure this lens fits the FG7X II housing. Also, is this a wet lens? (changeable at depth) Thanks

A: Hello. It fits perfectly. You can also change the lenses underwater. Awsome pics! Enjoy it!