The cocoa Countryman B2D Lavalier Mic for Electrovoice Transmittersfrom Countryman B2D Lavalier Mic for Electrovoice Transmittersfeatures a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the highest gain for general chest-worn applications such as presentations or sermons. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a TA4F connector for direct connection to Electrovoice BP-300, BPU-2, BPU-2Pro, BPU-2Pro-REF, BPU-R, CSB-1000, NBPU, NBPU-G, WTU-2, and RE3-BPT wireless bodypack transmitters.

Hypercardioid Pattern    Fits Electrovoice Transmitters    Headroom for Most Uses    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Standard (gray band) for most uses

Related Questions and Answers

Q: 1. What is the material it's made of?

A: The outer casing for the Wooden Camera VX Skateboard Camera Mic is made from a molded hard plastic with a wire mesh grille.

Q: 2. How can I adapt this microphone to use with an Iphone for filming skateboarding?

A: The best way to do this would would be this interface, using the the XLR connectors the mic comes with: https://www.bhphotovideo.com/c/product/1539057-REG/ik_multimedia_ip_irig_produoio_in_pro_duo_i_o_2_channel.html?sts=pi&pim=Y

Q: 3. Does this provide "plug in" power to the 3.5mm input jack?

A: Yes, the Rolls MP13 will supply plug-in power to the 3.5mm mic input.

Q: 4. Will this boost an XLR signal a further distance? I have a cable run of ~250ft and am trying to assure that I don't lose a signal.

A: The Rolls Mini-Mic Preamp is not really designed for boosting signal on a long cable run. For ~250 feet, you should use high quality shielded audio cables to avoid signal loss and if you do need to increase the gain without adding noise, you might want to try the Cloud Microphones Cloudlifter CL-1 Mic Activator (B&H # CLCL1) which improves signal-to-noise ratio and improves the performance of passive microphone signals by driving stronger, cleaner signals over longer XLR cable runs.

Q: 5. Can I attach this to a gh5s camera with everything that is included other then mounting just talking audio connection

A: Yes, the Wooden Camera VX Skateboard Camera Mic is compatible for use with the GH5S camera. A 3.5mm TRS coiled cable is included for connecting the mic to the camera's mic input.

Q: 6. Needing a amplified microphone to do voiceover on live dvd recording?

A: You don't need it, but a pre amp is a good idea!

Q: 7. Is it possible to mount this to a c-stand or light stand or does it always have to be mounted to a table?

A: The Elgato Wave Mic Arm comes with a flat, padded clamp that opens up to 2.4". It is not made for mounting to a C-stand, a light stand, or any kind of stand. However, you can use an adapter to be able to match the threading of the shock mount of your microphone to a light stand or C-stand. Alternatively, you can use a studio boom stand for your mic like the On-Stage SB96+ (B&H # ONSB96P), for example.

Q: 8. What are the dimensions of this case?

A: The Sennheiser Soft-Sided Carry Case for Select Bodypack Transmitters measures 41 x 225 x 124 mm.

Q: 9. Does this come with a power adapter? If so, can it work for 110v to 220v?

A: Yes, the Rolls MP13 Mini-Mic Preamp includes the Rolls PS27s 15 Vdc 500ma 100-240VAC power adapter.

Q: 10. How much depth on the edge of a desk is needed to safely clamp this arm onto? Would a 1" lip be enough? 1-1/2"?

A: Clearance requirements for the Elgato Wave Mic Arm have not been provided by Elgato, but typically for clamp mounting a broadcast arm you will want at least 2" of clearance.