The light beige Countryman E2 Unidirectional Earset Microphone, Hirose 4-Pin Connectorfrom Countryman E2 Unidirectional Earset Microphone, Hirose 4-Pin Connectoris an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with Audio-Technica wireless microphone systems. It provides suitable isolation at the mouth, but with less visibility than an E6 omni earset, and can be used to capture audio for loud speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The detachable cable terminates to a Hirose 4-pin AN cW-Style connector for direct connection to an Audio-Technica 4000 Series, 5000 Series, or 7000 Series bodypack transmitter.

For Audio-Technica Wireless Transmitters    20 Hz to 20 kHz Frequency Response    For Loud Speaking and Vocals    Fits over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Lower gain, for powerful vocals requiring the highest overload.

Related Questions and Answers

Q: 1. Will the 3.5mm version work with a mobile device in conjunction with Clear-Com's Agent-IC application?

A: Yes. The LH 300 has a TRRS and requires 2V, which a mobile device would provide. As far as the CC App goes, suggest contacting Clearcom.

Q: 2. Will this work with a Nikon Camera?

A: Yes it will work it will be a little funky with the triangle attachments for the straps

Q: 3. When I plug my Hirose cable into one of the ports with the power turned on, the green light goes out. Is the device I'm trying to power (a Lumos 100MK) not compatible?

A: Unfortunately they are not compatible. The Lumos 100MK is a lighting product. The ABPAK External Power is for Pro Audio devices with 4 pin Hirose connectors.

Q: 4. Is this battery plate open in the back exposing the circuit board like it shows in the photo, or is it completely sealed up.

A: Yes, the back of the bebob Amicro Gold Mount Battery Plate with 4-Pin Hirose & USB Type-C Outputs is exposed (as shown in the photo).

Q: 5. Can the mic be muted, or does that require a belt pack?

A: The Telex LH-302 Lightweight RTS Double-Sided Broadcast Headset does not have an onboard mute switch for the mic. The microphone will need to be muted externally, from a switch on the beltpack or device that the headset is connected to.

Q: 6. What can send power to this?

A: The Tiltaing Side Power Handles will send power through this cable.

Q: 7. Can this strap be used with an EOS R and the BG-E22 grip attached?

A: Yes.

Q: 8. can this cable work to connect power to the Zoom F8pro audio recorder to the SmallRig NP-F Battery Adapter Plate Lite for BM4K?

A: The locking DC barrel connector on the Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable may not connect properly to the SmallRig L-Series Battery Adapter Plate Lite, which uses a non-locking DC connector. As a better option, the CAMVATE DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders (B&H # CAC2725) should be a better match to do the job.

Q: 9. How do you remove the input sled?

A: Hi Mikala. One simply needs to pull it away from the back of the unit at the right side of the mixer, near the letter "M" of "MixPre" printed on the top rear panel of the chassis.

Q: 10. Does this work with the lectrosonics ucr411a receiver?

A: The Deity Microphones SPD-HRDC 4-Pin Hirose to 5.5mm Locking DC Barrel Jack Cable may not work with the Lectrosonics UCR411a Digital Hybrid Wireless Compact Receiver because of the locking DC plug on the cable. You will want to use a cable with a non-locking DC connector like the Lectrosonics PS-12 Power Cable - Coaxial Style to Hirose 7-4 pin (Betacam) Plug (B&H # LEPS12).