The tan Countryman B2D Lavalier Mic for Audio Technica Wireless Transmittersfrom Countryman B2D Lavalier Mic for Audio Technica Wireless Transmittersfeatures a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers the highest gain for general chest-worn applications such as presentations or sermons. In addition, the B2D lavalier is equipped with a hardwired cable that terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

Hypercardioid Pattern    Fits Audio Technica Transmitters    Headroom for Most Uses    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Standard (gray band) for most uses

Related Questions and Answers

Q: 1. Will this cartridge fit a Denon DP-52F Turntable ?

A: Yes, it should fit.

Q: 2. What speakers will work with this turntable, and do I need to buy additional cords to connect them?

A: You can use any powered speakers with the AT-LP60X. A few examples of compact solutions we offer are the Kanto YU2, the Edifier R1280T, the PreSonus Eris E3.5, as well as the Mackie CR3-X. Each of these speaker models include RCA cable that can be used directly with your AT-LP60X turntable.

Q: 3. Is it possible to get a shorter cable for this mic?

A: Yes, shorter XLR 5-pin female to dual XLR 3-pin male cables are available. The cable included with the miic is 5-feet long. We do have a 6-inch Sennheiser ACS5 5-pin XLR Female to Dual XLR Male Y Cable (B&H # SEACS), an 18-inch Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable (B&H # RECAXSTE), and a 4.9-foot Lewitt DTP 40 Trs - 5-Pin XLR Female to Dual 3-Pin XLR Male Audio Cable (B&H # LEDTP40TRS) that will work with the BP4025 microphone.

Q: 4. When shooting on a camcorder in the field, if I wanted only the center channel, so I could use the 2nd audio input on the camcorder for a wireless mic or some other input, which of the channels is mid if the mic is set to M/S and NOT doing an internal stereo matrix?

A: It ships with a 5-Pin xlr to 2 3-Pin xlrY-Cable. While It typically it is not marked on the cable which of the 3-pin xlr cable corresponds to which of the capsules, a quick and easy trial and error by independently testing each of the -pin xlr connectors, you should be able to figure it out in no time and with ease. I wish I would have a clear cut answer.

Q: 5. do you need a speaker for this turntable or is the speaker built-in?

A: It does not have speakers with the turntable.

Q: 6. How does this "Updated" model LP120X differ from the previous model LP120?

A: According to Audio-Technica: "This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier."

Q: 7. Does this connect to Zoom H5?

A: Yes if connected via the included 24 (0.61 m) Cable (5-Pin XLR-F to Two Standard XLR-3M Connectors)

Q: 8. Can you recommend a preamp/power supply for this mic? I don't need a mixer as I plan to feed the mic into an ATEM mini with an adapter

A: You can use the Rolls MP13 Mini-Mic Preamp (B&H # ROMP13) to power the Audio-Technica U851Rb Cardioid Condenser Boundary Microphone, then use an XLR female to 3.5mm TRS male cable like the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable - 3' (B&H # KOXRSM03B) to connect the output from the MP13 to the 3.5mm TRS input on the Blackmagic Design ATEM Mini HDMI Switcher.

Q: 9. What is the diameter of the shaft? I'm wanting to mount this in the mic holder on my Sony PXW-X70. It appears the mic holder would require a diameter of around 15/16 inch or 25mm. If the BP4025 shaft is narrower than that, are there mounting kits available to work with pro-level handles on cams? Thank you!

A: The mic holder attachment on most cameras have a diameter larger than most available microphones. We do offer a solution that allows mics to fit securely in these mounts. The ROCS Rubber O-Rings.

Q: 10. Is the sensitivity of 97db in the Specs tab "dB relative to 1 V at 1 µPa" or something else?

A: The 97dB sensitivity in the Audio-Technica ATH-M70x headphones refers to dB/mW.