The cocoa Countryman B2D Lavalier Mic, Medium Gain, TA3F Cable for AKGfrom Countryman B2D Lavalier Mic, Medium Gain, TA3F Cable for AKGfeatures a lightweight 0.18-ounce body that was designed to be discreetly mounted and can be used for miking news anchors, actors in a film or theater setting, lecturers in a school or house of worship type environment.

The B2D's tight hypercardioid pattern gives the mic an extra 6-10 dB of headroom compared to an omnidirectional lavalier mic, which means less problems with feedback, ambient noise, room rumble, and phase cancellations when using multiple microphones.

This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the B2D lavalier is equipped with a detachable cable that terminates to a TA3F connector for direct connection to AKG DPT800, DPT700, PT2000, PT40, PT400, PT4000, PT45, PT450, PT4500, PT470, PT60, PT61, PT80, and PT81 wireless bodypack transmitters.

Hypercardioid Pattern    Fits AKG Transmitters    Headroom for Loud Vocals    Frequency Response Tuned for Speech    Discreet Design for Minimal Visibility    Includes Foam Windscreen    Single Isolation Clip    Protective Cap    Carrying Case

With its small size and sensitivity options, the B2D can easily hide behind a shirt button. This makes it invisible for film work, theater, live shows, or any other application.

Natural vocal reproduction and a tight polar pattern make the B2D ideal for broadcast and is a dependable workhorse you can count on to perform night after night.

The isolation clips minimize clothing and vibration noise while allowing 360° of rotation for easy positioning of the microphone.

This microphone is tuned to a frequency response that is natural and intelligible at a wide range of distances from the mouth. It delivers wonderful sound quality on the chest (8-10" from the mouth) or towards the collar (3-4").

Medium (red band, -10 dB re W4) for Loud vocals

Related Questions and Answers

Q: 1. Will this unit drive a 250 ohm or 600 ohm headphone player with plenty of power, to where I don't feel like I need a higher power amplifier?

A: The specs show power of 600mw with 32 ohm headphones. One must also consider: 1- the headphone sensitivity specification, which will tell you how loud a headphone is, based on the power applied. 2- the transients in whatever it is you are listening to; large transients requires much more power. see below article of explanation: https://www.audeze.com/blogs/technology-and-innovation/sensitivity-impedance-and-amplifier-power

Q: 2. What is the Signal to Noise ratio?

A: AKG lists the headphone signal to noise ratio as 98.0 dB.

Q: 3. Does a 4-pole version exist? Or can you use a 4-pole splitter with this item to work on a laptop / mobile device?

A: The AKG MK HS MiniJack Headset Cable for PC is a proprietary cable meant to be used on AKG HSC/HSD line headsets. These headsets feature a 6 pin connection and the use of a 4 pole splitter may not be wired correctly for such headsets.

Q: 4. Is there a shock mount that will fit this microphone?

A: Sorry, no shockmount available for this microphone.

Q: 5. Will this fit the lavalier mic in the Azden WLX-PRO kit with the EX-series mic?

A: The Auray windscreens are for lavalieres with 1/4 inch diameter. The recommended windscreen for the EX series would be this AZEX503WS .

Q: 6. Can this be operational in 220-240v region?

A: It cannot it is not a dual voltage product US only.

Q: 7. Will this headset mount work the Rode Lavalier II mics that come with the Rode Wireless Pro?

A: The RODE LAVHS-MED Headset Mount for Lavalier Microphones is designed specifically for the Rode Lavalier and SmartLav+ microphones. The Rode Lavalier II is a different shape, and it may fit, but compatibility is not guaranteed and some ingenuity may be required.

Q: 8. Will this lavalier clip work for ew112-p G3? Thank you.

A: No, it is the wrong size and will not fit. Neither the clip or windscreens in this accessory kit fit the Sennheiser ME 2, which is the lavalier mic that is included with the ew 112-p G3 system. The Audio-Technica AT8439 lavalier clothing clip (B&H # AUAT8439) is a single clip that is sized to fit any lavalier mic. The WindTech TC-5 Universal Tie Clips (B&H # WITC5) 3-pack are also the correct size. Auray WLF-OLM2-10 Foam Windscreens (B&H # AUWLFOLM210) are designed to fit the ME 2 lavalier.

Q: 9. Which size works with a Sennheiser ME-2? (Medium or Large)

A: Large

Q: 10. Does this clip work with the sony ECM V1BMP? I have the older model sony uwp V1 lav system.

A: No the clip from this kit does not fit the ECM V1BMP