Canare Starquad Xlrm Cable 40' With Neutrik Connectors

Product Code: eq8178
Availability: In Stock

$169.50 $269.50

Qty

5 reviews Write a review

Description
Reviews (5)

The black Canare Starquad XLRM Cable 40' with Neutrik Connectorsis handcrafted with the super flexible Canare L-4E6S cable and superior Neutrik unisex XLR cable. This cable allows you to switch easily between male and female by sliding housing back and forth. Use Starquad for reduced hum and EMI, and no handling noise. This cable is perfect for all microphone use and great for connecting balanced output of some audio processors, mixers, and low density patch bays to XLR inputs.

Parameters
Connector 1	1x XLR 3-Pin Unisex
Connector 2	1x XLR 3-Pin Male
Cable Length	40' / 12.2 m
Number of Conductors	4
Wire Gauge	21 AWG
Color	Black
Shielded	Yes
Nominal Impedance	44 Ohms
Conductor Capacitance	46.0 pF/ft at 1 kHz
Packaging Info
Package Weight	1.65 lb
Box Dimensions (LxWxH)	7.4 x 7 x 1.9"

Special cross-linked PE insulation

Hand assembly with true silver solder

Pure performance Neutrik XLR and Neutrik Phone connectors

Related Questions and Answers

Q: 1. Why is this so expensive?

A: Due to the length, quality of cable and connectors.

Q: 2. Will this cover work for the switchcraft D panel rocker switch?

A: Yes, The Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors is designed to work with Panel connectors like the Switchcraft D panel connectors. Compatibility XLR D Series female XLR D Series male 1/4" Jacks D Series speakON NL2M* and NL4M* powerCON 20 A Series NAC3MPA* and NAC3MPB* powerCON TRUE1 NAC3MPX opticalCON chassis connectors USB NAUSB-W* HDMI NAHDMI-W* D-SUB NADB* Firewire NA1394-6-W* etherCON D Series etherCON CAT6 chassis connectors etherCON CAT6A chassis connectors BNC D Series Phono (RCA) chassis connectors Note: Maximum allowed opening angle during installation is 100°. Maximum panel thickness is 0.06"/1.5mm in combination with ether CON NE8FD* receptacle.

Q: 3. please how many metres is the cable?

A: Almost two. 1.83 meters.

Q: 4. Chris thanks for the answer. But would the etherCON connector also attach to the Datavision cameras? Or is there an adapter?

A: The primary benefit of using the ethercon connectors, on a reel like the Allen & Heath CAT6 Cable Drum, is that the connector is better protected from being crushed or exposed to outdoor elements. When connecting to equipment that doesn't have the locking connection available anyway, a reel like this will work better and will probably be more cost effective for you: https://bit.ly/492LIGn

Q: 5. Can this cable be used for an FS7 to Atomos Shogun/Shogun Inferno for 4K Recording?

A: Thanks for your question. The short answer is yes! The Connector and cable combination is designed to function at 6G up to 87 meters.

Q: 6. Does the cable itself say made in Japan or China?

A: This Cable is made in Japan.

Q: 7. Can I use a 500' SDI cable to successfully carry video feed from a camera to a TriCaster 460 or will I need to amplify signal?

A: I do not believe that any SDI cable is currently capable of sending 3GSDI 500ft, without any conversion or extenders of some sort.The SDI cable functional distance decreases with an increase in bandwidth and data - Belden defines their distances for the 1855A cable as 215 feet for HD-SDI and 149 feet for 3G-SDI. So yes, you would need to amplify or extend your signal with an SDI to fiber converter like the Camplex CMX-3GSDI-LCF or Telecast Rattlers. There are many similar SDI to fiber extenders in market if you have another brand preference.https://a href= http://www.belden.com/resourcecenter/tools/upload/TB65_p28.pdf target= _blank www.belden.com/resourcecenter/tools/upload/TB65_p28.pdf/a

Q: 8. how many meters 65.6?

A: 65.6 feet is about 20 meters.

Q: 9. Will this also carry an SD signal as well?

A: This cable will carry HD and SD signals.

Q: 10. Is Canare L-5CFW being used? Thanks

A: This HD-SDI cable uses 18 AWG RG6 digital video coaxial cable.

Erik	19/07/2024
[1.65 lb] I dont have much to say about the cable other than that is it well contructed and carries a good clean sound. I use it with my MXL 870 and Behringer 1204 mixer and I'm pleased with it. 5

CJ-TriState	12/07/2024
[1.65 lb] Everyone knows about the high end/overpriced Mo'Gomi cables! I'll place my money on these instead! Colors, high quality & more at a FAIR price. Plus, the B&H stamp of helpfulness. I'm 100% satisfied! 5

Elvis	03/07/2024
[Black] This is a review of the 6 foot Canare L-4E6S Star Quad XLRM to XLRF Microphone Cable. I'm currently using these with the Zoom F3 and Rode PSA1+. It will also be used for portable recording. It's very flexible (though I have no other XLR cables to compare it to.) You can coil it into a 3 diameter round circle without difficulty. It does fit into the clamps on the PSA1+, but I think a thinner cord might fit deeper down in the groove. For a permanent installation, you could probably force it deep down into the groove. The Neutrik nc-mxx connector snaps into the F3 with an elite click. The sound is without any hint of interference. I think the warranty should be longer, but these cables are excellent. 5

Joe	09/05/2024
[7.4 x 7 x 1.9"] I've been using the Canare XLR cables purchased from B&H for several years now. I setup and tear down EVERY DAY. Flexibility and lack of noise is excellent especially in rooms where a lot of other electronics are operating. Never a issue with crosstalk. Best of all the colors makes my setup easily repeatable, dependable. and FAST ! Got to love THAT !! Many thanks both to Canare & B&H. Excellent product combined with outstanding availability and service. 5

Simon	03/04/2024
[7.4 x 7 x 1.9"] These Canare XLR plugs made a solid connection with the equipment, are well made, sound great, and are well finished with Neutrik furnishings. Based on this purchase, I wouldn't hesitate to try more products from Canare. 5