With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish Zacuto Recoil Pro V2 for Sony FX9from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Optimally Balanced Shoulder Rig for FX9    VCT Pro Baseplate with Shoulder Pad    FS7 Rosette-Mounted Trigger Grip    Axis Mini EVF Mount for Sony FX9    LANC Extension Cable

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Does the top plate have threads to attach the stock shotgun mic mount or otherwise come with a mic mount?

A: Yes, the following Zacuto tactical handle features a built-in Z-Rail/NATO-type rail on top, a shoe mount, and multiple 1/4"-20 and 3/8"-16 mounting threads that enable you to mount a variety of accessories.

Q: 2. Does this unit use the FX6 lcd screen? Or a Zacuto evf?

A: it uses the sony LCD screen

Q: 3. Is there a version of this with 2 handles?

A: There is the Zacuto Gratical Eye Bundle for C500 Mark II with Dual Grips: https://www.bhphotovideo.com/c/product/1527832-REG/zacuto_z_c500_gre_2dg_c500_mark_ii_with.html

Q: 4. What viewfinders can you use with the Axis Mini EVF Mount?

A: The Zacuto Axis Mini EVF mount is designed to work with Zacuto EVF models like https://bhpho.to/396pLfw

Q: 5. Will this rig work with the FX9?

A: No, the Zacuto Sony FS7 Dual Trigger Grips included with the Zacuto Sony FS7 Recoil with Dual Trigger Grips are not compatible with the Grip Remote Control included with the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only).

Q: 6. Does the dual grip package include the Z-Finder?

A: No, the Sony FX6 Recoil Rig with Dual Trigger Grips does not include the Z-Finder. The image on our site shows the Zacuto Kameleon EVF Pro ZAZKEVFP mounted. However, that is not included in the kit either.

Q: 7. What's in the box?

A: This kit includes the VCT Pro Baseplate, FS7 Trigger Grip, LANC Extension Cable and Axis Mini for FS7.

Q: 8. Can you attach the Zacuto Kameleon Pro directly with this rig? If not, what extra accessory do I need?

A: The accessory needed to connect a Zacuto Kameleon PRO is an EVF mount, Zacuto made one for this case, you can search it on the website, item code: ZAZMAEM

Q: 9. Can this be used directly on rosette mount of fx9 body?

A: Yes you can. The FX9 Trigger Grip attaches to your rig or camera via the M6 Rosette.

Q: 10. Is this rig include view finder ?

A: No, the Zacuto Sony FX6 Recoil Pro does not include a view finder.