Jupio Proline 14.4V 95Wh Li-Ion Battery Gold Mount

Jupio Proline 14.4v 95wh Li-ion Battery Gold Mount

Product Code: eq81987
Availability: In Stock

$537.00 $794.76

Qty

16 reviews Write a review

Description
Reviews (16)

The Jupio ProLine 14.4V 95Wh Lithium-Ion Battery, in a Gold mount, supports a continuous draw of 20A and offers a D-Tap output for accessories and USB output for charging mobile devices on set. The battery features an ergonomic design with finger grips and has an LED battery level indicator that turns on at the press of a button. It's also designed with overdischarge, overcharge, and overcurrent circuit protection.

20A Continuous Draw D-Tap Output / 5V, 2.1A USB Output LED Level Indicator with Power-On Button Ergonomic Design with Finger Grips

Parameters
Mount / Series Type	Gold Mount
Chemistry	Lithium-Ion
Battery Capacity	6600 mAh / 95 Wh
Output Voltage	14.4 VDC
Maximum Load	20 A
Accessory I/O	1x D-Tap / P-Tap Output 1x USB-A Output
USB Output	5 V, 2.1 A
Operating Temperature	-4 to 122°F / -20 to 50°C
Storage Temperature	-4 to 140°F / -20 to 60°C
Dimensions (W x H x D)	3.78 x 1.61 x 5.98" / 9.6 x 4.09 x 15.19 cm
Weight	1.18 lb / 0.54 kg
Packaging Info
Package Weight	1.435 lb
Box Dimensions (LxWxH)	7.4 x 4.8 x 3.6"

14.4 VDC nominal / 16.8 VDC maximum voltage
20A continuous draw
D-Tap output
5V, 2.1A USB output
LED battery level indicator with power-on button
Ergonomic design with finger grips
Overdischarge, overcharge, and overcurrent circuit protection

Related Questions and Answers

Q: 1. Is this battery approved for taking on-board commercial airlines?

A: The FAA ruling stipulates batteries must be less than 100Wh. The battery industry standardized with 95Wh being considered the rating for airline travel. Thus IndiPRO Tools Compact 95Wh V-Mount Li-ion Battery with it's 95Wh rating is acceptable.

Q: 2. Does anyone know if this kit comes with the screws? Mine did not.

A: Yes, this kit comes with the screws for the URSA plate. If you did not receive the screws please contact sales@indiproco.com and we can further assist you.

Q: 3. Will this battery be able to power a Blackmagic Ursa Mini Pro 4.6K Camera?

A: If you purchase the Blackmagic Design V-Mount Battery Plate for URSA, B&H # BLUVLBP, then yes, you may use the Dracast 95Wh Lithium-ion Battery (V-Mount) with the Blackmagic Design URSA Mini Pro 4.6K G2 Digital Cinema Camera.

Q: 4. How many Amps does it out put?

A: This battery puts out approximately 8 Amps (based on the formula: Amps = Watts / Volts). // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 5. Do these batteries indicate the life status (scale of 0-4) like the original Nikon batteries do?

A: The Proline offers higher capacity but does not have the status indicator on the battery itself no.

Q: 6. Based on the previous Q&A about using an AB Gold Mount charger to charge these batteries, I ordered two of them. I reviewed the batteries two days ago and cannot get them to charge at all on my AB charger. Is there a solution to my issue?

A: Unfortunately our batteries are not compatible with AB Gold Mount Chargers. There is a chip is all AB Chargers that communicate with all AB Batteries which allows for them to charge. I would recommend buying one of our chargers or one that is similar in order to charge up these batteries.

Q: 7. What is the charging time on a dead battery?

A: It all depends on the type of charger that you are using to charge the battery. For example if you were to use a 2.5A charger the battery would be fully charged in approximately 3 hours.

Q: 8. Are you able to use the dummy batter along with using the d tap for another product at the same time?

A: If your asking if you can use the v-mount battery that's connected to a plate and the d-tap at the same time then yes you are able to. You are able to use both outputs simultaneously. If that is not your questions please explain exactly what you are trying to do??

Q: 9. Can I charge this battery by using the d-tap connector?

A: Yes, although I assume that may be contingent on the D-Tap charger you're using. I'm not aware of any compatibility issues, but let's say that I'm 99% sure your D-Tap charger will be fine. I know mine was...although, as you you know, charging these batteries via D-Tap is SLOW.

Q: 10. The USB port doesn't seem to charge iPhones, any idea of what I'm doing wrong

A: You have to hold the battery check button on the side for two or three seconds. That turns on the usb port.

Ed	17/09/2024
[5 V, 2.1 A] I purchased the battery to replace the original for my D3S. Since Nikon no longer sells a battery for my camera I tried the Jupio. So far, it has performed well. The fit was fine and it delivered all the power I needed. I have shot one HS Basketball game without issues. 5

Patrick	01/09/2024
[5 V, 2.1 A] I purchased this as a spart battery for the Nikon D3, but when I tested it during a baseball tournament, I found that the battery life was noticeably longer than the standard battery, so it is now my primary. Service from B&H Photo was, as always, fast and accurate, and the shipment and delivery were timely. 5

Andrew	11/08/2024
[Gold Mount] I own four of these and they have been absolute workhorses powering camera, monitor, lighting etc. 5

Jesse	19/07/2024
[5 V, 2.1 A] I've been using three of these for 5 months now with an FS7, Pix-e5 and Redrock Micro remote focus and they all work great. They give me about 4 hours of power and the LCD displays fairly accurate life with showing the percentage left. Not the best on time estimates, but just going by percentage left it works well. The included charger takes a while to charge them, but three of these batteries last me all day most of the time. 5

Darryl	13/07/2024
[14.4 VDC] There was a time when I would only use manufacturers' only batteries in my bodies. However, I had four new in the box EN-EL4a Nikon batteries which had never been used. I did store it for about 1 year without use or charge. When I attempted to charge it, it would not charge. When I called Nikon to see if any service would be available they me it was not. The Jupio Proline fits a little tight in the compartment. I believe it may be the connector that is really tight. It charges fully. It also reads properly in the battery information in the camera (D3S). I haven't been able to use it long enough to determine just how long it will function on a charge. That information will be forthcoming. For now I will only use Jupio batteries. With my disappointment with Nikon products it may not be too much longer. 5

Andrew	05/07/2024
[Gold Mount] Own four of these. Great for powering EVA1, Aladdin All-in-2, Hive 200 C (need two tho), PIX-E5H, Video Assist 12G HDR, Tilta Nucleus M etc. Super reliable. Also picked up a couple IndiPro Tools chargers as well. 5

Wolfgang	27/06/2024
[Lithium-Ion] Works great. Built in charging is nice. 5

Don	16/06/2024
[5 V, 2.1 A] Most of my Nikon EN-EL4(a) batteries were going to DefCon 4 that I use in the D700 and D3s cameras. Now that Nikon saw fit to up the price $30, I thought I'd try one of these Jupio 3350mah batteries. I'm glad I did. They operate perfectly. Menus register the same. They seem to hold a charge better. Not only when using the cameras, but also if they sit idle for a week. So as soon as I finish this review, I'm going to order another. The Nikon battery I just finished calibrating for 10 hours just went from condition '3' to '4'. Time to replace it. 5