Countryman I2 Mic, High Gain, Lemo 6-Pin For Rms-2000-Mxl, Tx2000

Countryman I2 Mic, High Gain, Lemo 6-pin For Rms-2000-mxl, Tx2000

Product Code: eq82093
Availability: In Stock

$776.85 $1,196.35

Qty

7 reviews Write a review

Description
Reviews (7)

The black Countryman I2 Mic, High Gain, LEMO 6-Pin for RMS-2000-mxl, TX2000from Countryman I2 Mic, High Gain, LEMO 6-Pin for RMS-2000-mxl, TX2000is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and capturing detail in quieter instruments. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a LEMO 6-pin connector for direct connection to Audio Limited RMS-2000-mxl and TX2000 wireless bodypack transmitters.

Figure-8 Polar Pattern For Instruments and Sound Reinforcement Natural On-/Off-Axis Frequency Response For Uncolored Recordings Reduced Feedback Issues

Key Specs
Compatible Transmitters	Audio Ltd.: RMS-2000-mxl, TX2000
Polar Pattern	Figure-8
Frequency Response	50 Hz to 20 kHz
Maximum SPL	130 dB (1% THD)
Sensitivity	H for High Gain/Distance Miking (I2)
Analog Output	1x LEMO 6-Pin
Environmental Resistance	No
Microphone
Compatible Transmitters	Audio Ltd.: RMS-2000-mxl, TX2000
Polar Pattern	Figure-8
Included Tone/Pattern Caps	No
Performance
Frequency Response	50 Hz to 20 kHz
Maximum SPL	130 dB (1% THD)
Sensitivity	-40 dBV/Pa (1 kHz)
Sensitivity	H for High Gain/Distance Miking (I2)
Equivalent Noise Level	20 dB (A-Weighted)
Connectivity
Analog Output	1x LEMO 6-Pin
Cable Length	5' / 1.52 m
Power
Power Sources	Phantom Power
Operating Voltage	6 to 50 V (Phantom Power)
Physical
Color	Black
Environmental Resistance	No
Dimensions	H: 0.16 x W: 0.28 x L: 0.44" / H: 3.5 x W: 7 x L: 10.5 mm (excluding Cable Strain Relief)

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

A microphone with a figure-8 (bidirectional) pickup pattern is sensitive to sound coming from the front and coming from the rear, but has a very high rejection for sound coming from the sides. Great for mid/side and Blumlein stereo applications.

Related Questions and Answers

Q: 1. Hello is this microphone pc friendly ? could i plug it to computer?

A: This microphone has a standard 3-pin XLR connector on it. To connect to a computer, you will need an audio interface. There are many interfaces on the market that are all-in-one, with microphone preamps.In short, no, this microphone will not connect straight into a computer.

Q: 2. Can anyone who has ordered this charger, please tell me which cables are included? Does it include a 12V DC charging cable for use in a car?

A: Only the AC cable is included.

Q: 3. Will this cable work to power the SmallHD Cine 5 screen when connected to a V-mount battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") will not but the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") will power the SmallHD Cine 5.

Q: 4. Can I use this to supply power into the came-tv astral follow focus system motor which have 6 pin lemo input?

A: Yes, you can use the Tilta 2-Pin Lemo to 5.5/2.5mm DC Male Cable as long as your power source can provide 12 to 18 volts.

Q: 5. This is isn't the same as a 2-pin power cable that the bmpcc4k uses is it?

A: It is not the connection used on the Pocket 4K/6K.

Q: 6. Would this work with the 12v output on the small rig vmount battery adapter plate?

A: The barrel connector for 12v on the Smallrig 3204 Vmount model is 5.5/2.5mm for 12v.. Yes, It should work.

Q: 7. Is this wired pin 1 +VDC? Or is it pin 2?

A: We are not aware of such a version of this cable. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 8. How do you fit a Nitecore 21700 battery into this charger?

A: The negative contact on the charger is retractable, so it will adjust accordingly depending on which battery is installed.

Q: 9. What is the average charge time for 18650 battery?

A: 5 hours

Q: 10. Does 5.5/2.5mm represent the length of the plug, diameter of the plug, or both?

A: 2.5mm is a measurement of the inner diameter of the connector. 5.5 is a measurement of the outer diameter.

anyonymous	26/08/2024
[Figure-8] Our Church was looking for replacement choir mics as the ones we had were over 10 years old and were black and our ceiling is white. After talking to one of the B&H staff, they recommed this product, it isn't the cheapest and not the most expensive. Installation was a snap, the 50' cord is a blessing as some came with only 35', powerful pick up for such a small package. After installation most folks could no find them as they blend in so well. We may need one more mic for the size of our choir, but we were advised to try two as we could add more later if needed. 5

jamesbtex	18/08/2024
[Figure-8] I purchased it to use internally to amplify my UDU drums. It worked great at amplifying all the deep bass to high trebles and doesn't clip due to sonic pressures created when playing the UDU. The microphone was recommended to me by top professional UDU players and they were right on the advice. Best microphone I have used yet for this purpose. I also tried it with my Native American flute and attached it to the fetish leather bands. Worked great for that application also. Highly recommended!! 5

anyonymous	08/08/2024
[Figure-8] I used it to mic violin performances. 5

TPL	29/07/2024
[Black] If you need a cardioid lav this is a great choice. This is a great mic and much needed upgrade for the Sennheiser wireless kit. A little small and delicate if you are used to the Sennheiser lavs, but sound MUCH MUCH better. 5

jamesbtex	17/07/2024
[Black] I purchased this microphone and the Countryman battery powered module to use for amplifying UDU drums. It exceeded my expectations!! Excellent microphone for this purpose and for amplifying Native American flutes. Can't wait to try it on the silver flute and saxophone. If you want a Microphone to use inside of UDU drums where you need to amplify the sounds they produce yet reject the heavy compression created inside of drums this is the microphone for you! 5

Michael Kihn	02/07/2024
[Figure-8] The recrding quality and size of he isomax 2 microphones make them the perfect choice for recording percussion instruments like frame drums, udus and other instruments that create internal sound which are hard to capture with an external microphone. The best result often is a mix of internal and external micing; my choice for he internal part is isomax 5