A carrying case for professional DJs that doubles as a versatile controller platform, the silver-on-black Denon Prime 2 Odyssey Flight Case Silver Blackis designed specifically for the Denon DJ Prime 2 controller system and provides protection during transport from on-the-road wear and tear. The case features a removable sliding Glide Style platform, allowing you to rest a laptop, microphone, or other gear while you keep the controller on the bottom area. A 1 RU rackmount space is below the controller for installing a wireless microphone receiver or other rack gear. Should you wish, the 1 RU mounting rails may be moved to the rear of the case or all together.

On the inside of the case, beveled-foam cutouts on each corner are custom built to fit the Prime 2 controller, raising it slightly to allow for efficient DJing. A cable management port in the back and removable V-cut front panel give you access to all the necessary controls and headphone/microphone jacks while keeping things organized. The case is made with rubber feet for an antiskid bottom and has steel-ball corners for increased durability.

Sliding Platform for Laptop or FX Board    Rails for 1 RU 19" Rack Below Controller    Allows Easy Access to Controls and Jacks    Beveled-Foam Interior    Removable Front Panel and Case Lid    Roller Wheels for Easy Transport    Recessed Latches and Handle

• Premounted removable 1 RU 19" rackmount rails below the controller space
• Rack rails can be positioned for front or rear mounting (additional 1 RU rack rail kits are optional)
• Removable V-cut front access panel
• Patented top glide style platform with 3 cable port holes
• Bottom rubber feet
• Heavy-duty ball corners and hardware
• Patent-pending beveled-foam interior
• Bottom cable port, great for cable management
• Recessed handles and latches
• Glide platform surface (W x D): 27.75 x 12”

Related Questions and Answers

Q: 1. What is the is the length of the unit when the table is set up?

A: The width of the table is approximately 38.5 corner to corner (and depth is about 22) and 21.5 on the rack itself. When the table is set up for use, the overall length across is 60 .

Q: 2. Hi there.... Can you provide the dimensions of all the internal foam pieces/blocks for the Denon Prime 4 Low Profile Flight Case FZDNPRIME4 Thanks Bill.

A: The only dimensions made available for the Odyssey Denon Prime 4 Low-Profile Flight Case are for its exterior, which are 32.3 x 8.3 x 23.3". The interior is made to precisely fit the Denon DJ Prime 4, which as a unit has dimensions of 28.7 x 19.6 x 4.1".

Q: 3. What is the weight limit for the side tables?

A: Unfortunately, the manufacturer does not publish a specification for the weight limitation of the side tables. I would suggest, given the nature of the product, and the type of equipment displayed with it while in use, a safe weight would be about 50-60 pounds per side.

Q: 4. I have a pmp6000 mixer. will it fit on the slant top with no issues? the mixer dimensions are 23.5 x 19.5 x 4.8 inches

A: Thank you for your question. The PMP6000 will not fit as it is not a standard 19" rack mount unit.

Q: 5. Is this case 38" tall with or without the casters?

A: The Odyssey FZWB4WDLX Flight Zone Deluxe 4-Drawer Workbox Tour Case with Casters & Side Table is approximately 38" high with the casters attached.

Q: 6. How deep is this case?

A: 15/ 1/2 deep

Q: 7. Will this fit the m32r live?

A: The Midas M32R Live is slightly too large to fit within the 13-space slanted rack on the Odyssey FZ1316WDLX Flight Zone ATA DLX Combo Rack Case.

Q: 8. Is the case compatible with other Pioneer products? Is it compatible with 2 XDJ-1000s and a DJM-750 MK2 mixer?

A: Both the XDJ-1000 and the DJM-750 MK2 are slightly smaller than the DJM-900NX2 and CDJ-3000 which this case is intended for, so these models will be able to fit inside the case but the fit itself may not be as snug as could be desired.

Q: 9. Curious as to the width of the console once the lid is connected as a side mount table? If the exterior dimensions are (WxHxD) 21.5" x 44.75" x 28.5", I'm guessing the total width with table mounted would be 66.25". I just want to be sure!

A: It will actually be just a little less that 66.25" because the Height dimension includes the casters, which are 2", so overall width will be closer to 64".

Q: 10. Will the prime go fit in the case if it has a decksaver on it (plastic cover that goes over the buttons)? It's about 2" tall.

A: No, but you can use the Decksaver when the Prime Go is out of the case and you can remove the Decksaver when traveling with the Prime Go and ProX ASA-style flight case for it.