The black Countryman I2 Mic for WisyCom Transmitters, LEMO 3-Pin, Blackfrom Countryman I2 Mic for WisyCom Transmitters, LEMO 3-Pin, Blackis a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version offers a standard gain and is suitable for close miking and loud instruments like horns. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

Cardioid Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

The cardioid polar pattern is effective for picking up sound directly in front of the microphone and is less sensitive to sound directly behind the microphone. It picks up about 1/3 less ambient noise than the omnidirectional polar pattern, so the working distance (the distance a performer could be positioned from the microphone) is approximately 1.7 times that of the omni. The cardioid pattern works best when you can position the microphone directly towards the sound you wish to record (a lead singer, for example) and directly away from unwanted sound sources like a crowd or a loud monitor).

Related Questions and Answers

Q: 1. Hello there. Can I use this cable to power my Zacuto Gratical EVF? THX

A: That would depend on what power you are using. This question is better answered directly. Please email us at provideo@bhphoto.com.

Q: 2. Will this work to power the Blackmagic Video Assist 5" 12g connected to lemo on the Core SWX V-mount battery plate for Komodo?

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable is compatible between the Blackmagic Video Assist 5" 12G and the Core SWX V-mount battery plate.

Q: 3. Will this work with the Tilta ronin rs2/3 base plate

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") can be used with the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (V-Mount) or the Tilta Battery Plate for Power Pass-Through Plate for DJI RS 2 (Gold Mount).

Q: 4. Does this fit the BMPCC 6K?

A: This cable is meant for the RED Komodo.

Q: 5. Would this work with the 12v output on the small rig vmount battery adapter plate?

A: The barrel connector for 12v on the Smallrig 3204 Vmount model is 5.5/2.5mm for 12v.. Yes, It should work.

Q: 6. I tried using this charger to charge AA and AAA eneloop NiMH batteries. They get VERY hot. So hot that I stopped the charge because I was worried the batteries were being damaged. Has anyone else had this issue? Is this normal?

A: This charger is for high amp dicharge batteries that have a low internal resistance ! Time to charge is 3 hours max.Eneloop charge in about 10 to 15 hours on a charger made for high IR at a much lower amp

Q: 7. will this work with a SmallHD Cine 5?

A: Yes, the Kondor Blue D-Tap to LEMO 0B-Type 2-Pin Male Power Cable (Raven Black) can power the SmallHD CINE 5 Touchscreen On-Camera Monitor, but we would recommend using the Teradek 2-Pin LEMO to P-Tap Cable (18"), BH #TEBIT118, for best compatibility.

Q: 8. Can this be used to power the Accsoon cineye transmitters?

A: Sure, with the correct power source and outputs or adapters you could use the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable to power the Accsoon CineEye 2S Pro Wireless Video Transmitter & Receiver.

Q: 9. Can anyone who has ordered this charger, please tell me which cables are included? Does it include a 12V DC charging cable for use in a car?

A: Only the AC cable is included.

Q: 10. Will this work with Cinegears?

A: This product is for TRIGYN Gear with a 2 Pin Lemo Connection. If the Cinegears does not have 2 Pin Lemo it will not work.