Louroe Verifact D Mic Level Microphone

Product Code: eq8320
Availability: In Stock

$432.93 $653.72

Qty

6 reviews Write a review

Description
Reviews (6)

The Louroe Electronics Verifact D Mic Level Microphone is an omni-directional, low impedance, electret condenser microphone. When wall mounted, the microphone can pick up normal sounds at a distance of up approximately 15", and when ceiling mounted sounds can be picked up at a distance of up to 30". The microphone is mounted to the back of a single-gang stainless face-plate, and includes a 20’ cable and stereo plug for directly connecting to the audio input of an IP camera. The microphone is designed to fit into a standard single-gang electrical box.

Omnidirectional Low Impedance Condenser Audio Capture Up to 15' from Location Audio Capture within 30' Diameter Circle Plugs to the Audio Input of an IP Camera 12' Cable With Stereo Plug Included Single Gang Box Accessory Available

Parameters
Sensitivity	-45 dB/pa
Frequency Response	50 Hz to 5 kHz ± 1 dB
Output Impedance	1 kΩ
Current Drain	0.8 mA
Supply Voltage	1.8 to 4.5 VDC
Dimensions	Faceplate: 2.75 x 4.50" (6.98 x 11.43 cm)
Weight	8 oz (226 g)
Packaging Info
Package Weight	0.6 lb
Box Dimensions (LxWxH)	7.3 x 4.8 x 1.6"

Omni-directional microphone with low impedance

Wall or ceiling mountable

Connectable to an IP camera's audio input

Related Questions and Answers

Q: 1. How many channels of audio does the cable send?

A: This, Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable, is intended to pass stereo (L/R) signals.

Q: 2. Would this cable work to record line level from a mixer to an iPhone?

A: The Sescom LN2MIC-TASDR100 Line Out to Camera Mic Level In Cable will convert line level signal to mic level, but you would need to use additional adapters to connect from the mixer and to enable compatibility with the iPhone. As another option, Sescom does offer other types of line to mic attenuator cables that are intended for use with smartphones and have a 3.5mm TRRS connector on the end that connects to the smartphone which you would use with the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) to convert the TRRS plug to Lightning. Depending on the mixer and its available output connectors, you will have different options such as the Sescom Dual 1/4" Phone Plug to 3.5mm TRRS Plug Line to Microphone Summing Cable 3' (B&H # SEIPSUMTS3) or the Sescom Stereo RCA to 3.5mm TRRS Plug Line to Mic Level Summing Cable for Mobile Devices 36" (B&H # SEIPSUMRCA3) or the Sescom Dual Female XLR to 3.5mm TRRS Plug - Line to Mic Level Summing Cable for Mobile Devices 3' (B&H # SEIPSUMXLR3). These cables will send the left and right output from the mixer and will connect to the iPhone when used with the Apple Lightning adapter

Q: 3. Does this work with mic level IP cameras?

A: No this unit is a line level microphone.

Q: 4. Is a power supply plug in class 2 included?

A: The Louroe MLA-4 does not include an AC adapter.

Q: 5. What is the difference between this mic and the Verifact E LE-075?

A: The microphone has Electronic Gain control which allows you to control how sensitive the microphone is. The LE-075 does not have that.

Q: 6. does this unit work with HIKvision NVR? how it connected?

A: Hello, this microphone designed to work with a computer connected to the USB port.if you need a microphone for an IP camera I will recommend the Verifact A with AD-1 power supply.if you need more information send me an email to techsupport@louroe.com

Q: 7. what powers the microphone and could it be plugged into a stereo instead of a camera?

A: The LE-778 has a 3.5mm stereo plug that can plug into any device that accepts a mic level input. The device, such as an audio recorder with a mic input, will amplify the signal to line level for recording or listening to live.

Q: 8. It seem obvious give TRS and 2xRCA plugs, but I would like to confirm that is two channel (stereo) out to the camera?

A: The Sescom SES-43DB-MZ2P Attenuating Line to Mic Level Cable is used to send line level audio from RCA left and right outputs to a camera's 3.5mm TRS microphone input. The cable has a built-in attenuator to pad the signal by 43 dB which will prevent any clipping or distortion.

Q: 9. Does this cable work for Panasonic Lumix S1R and Zoom H6? Thank you!

A: Hi Edward. For the Zoom H6 recorder, we recommend the LN2MIC-ZOOMH6 or LN2MIC-ZMH6-MON assembly. Thank you!

Q: 10. Does this cable work for zoom f6 too??

A: Hi Ching. This cable attenuates the signal 35dB, so it might attenuate the signal a bit more than desired. We have a couple of cables specifically for the Zoom H6, the LN2MIC-ZOOMH6 and LN2MIC-ZMH6-MON. These Zoom H6-specific cables attenuate 25dB rather than 35dB. The LN2MIC-TASDR100 cable will work, but you might have to raise the audio level up on your camera if the audio level is a bit low. Thank you!

AST, LLC	26/08/2024
[1 kΩ] Installs in a wall or drop ceiling easily w/cut-in box. Very sensitive. Unobtrusive. 5

Dan	19/08/2024
[-45 dB/pa] The K&M 25950 is a terrific mic stand for floor-standing [guitar] amps or for a kick-drum. I also have a K&M 25900 which is slightly taller... I think the 25900 is more suitable for micing a snare or other mid-height use-case, so when I needed another low-mic the 25950 was definitely my go-to 5

Felicia	14/08/2024
[-45 dB/pa] Was needing to have a simple way to record audio to one of our IP cameras, and this device did exactly what it was supposed to do. It allowed us to run the microphone, amplifier, and camera off one PoE connection. Easy to install. 5

Eugene	27/07/2024
[0.6 lb] This small mic stand is heavy and solid! Super stable, and very well designed and made. 5

Steven	03/07/2024
[1.8 to 4.5 VDC] Anybody professional audio engineer who has EVER tried to mic the inside of a kick drum will tell you how frustrating it can be with cheap mic stands. Most either don't have the weight, or don't have the reach, or both. This has both and is a pure joy to work with. The thing most reviews don't tell you is that all 3 legs are solid cold rolled steel. This makes for a mic stand that won't easily tip over, even when bumped or kicked because it has the weight to stay put. The other Godsend is the design of the boom arm. It allows you to thread the Mic on and then extend it to the perfect spot inside the kick drum and then make micro adjustments with second boom screw. Much more precise than having to reach inside and try to re-adjust with a less than perfect set screw ( I'm talking to you Beta 52 ), especially if your kick only has a small sound port in the resonant head and you cant, or don't want to take the head off completely. This is a well thought out product and more than worth the few extra bucks over the cheap ones. It's a quality stand top to bottom. Very highly recommended. 5

Sharon	19/04/2024
[1.8 to 4.5 VDC] Placed on a dock over the river, this mic brings the outdoors into my home, with eagle song and water music. Nothing sounds better! 5