Offset Shoe Mount For Cameras | Lanparte Accessories

Product Code: eq83218
Availability: In Stock

$95.70 $136.85

Qty

14 reviews Write a review

Description
Reviews (14)

Offset a shoe mount accessory away from your camera using this Offset Shoe Mount from LanParte. The durable aluminum mount features a shoe mount mounted onto an extension bar and an integrated 15mm rod clamp for a separately available 15mm rod extension.

The extension features a slot for the two 1/4"-20 screws so you can position them for mounting onto a variety of cages or rigs. The 15mm rod clamp features a locking lever for securing a separately available rod, and the shoe mount features a safety screw that prevents your accessory from sliding. Two Allen wrenches are included to tighten the screws.

Offsets a Shoe Mount Away from Camera Mounts on Camera Cage with Screws Sliding Slot Extends out to Shoe Mount Integrated 15mm Rod Clamp Safety Screw Prevents Accessory Slip 2 x 1/4"-20 Mounting Screws Included 2 x Allen Wrenches Included

Parameters
Material of Construction	Aluminum
Mounting	1 x Shoe Mount 1 x 15mm Rod Clamp 2 x 1/4"-20 Screws
Dimensions	2.8 x 1.5 x 0.9" / 70 x 38 x 22 mm
Weight	1.2 oz / 33 g

Related Questions and Answers

Q: 1. This work with sunpack DF3600U?

A: Yes, this will work with your flash.

Q: 2. Will this work with the ronin m?

A: We're afraid not. This plate is specifically for the Ronin-S.

Q: 3. Would this work on the crane 2?

A: This plate is designed specifically for the Ronin-S as an Offset Camera Plate for the BMPCC 4K. It may not work with the Crane 2 and we do not recommend it.

Q: 4. This work with sunpack DF3600U?

A: Yes it will and it will be easier to manage

Q: 5. Are counterweights still necessary (or recommended) with this rig?

A: Counterweights may not be needed depending on the lens used.

Q: 6. Does this stand work with the Nikon SB400?

A: This is compatible with any shoe-mount flash.

Q: 7. Does this VIXIA HF21 that has a "Mini Advanced Shoe"?

A: The Canon Vixia HF G21 has a Mini Advanced Shoe as well as a Cold shoe.

Q: 8. Does this work with Canon flashes? (I have the 600 EX-RT, lost the hot shoe stand.)

A: It works on my 580, I'm sure it will also fit a 600.

Q: 9. Is this stand compatible to Sony/GODOX/NISSIN multi Interface shoe flashes?

A: Yes

Q: 10. Hi, would this fit onto a zihun crane 2?

A: More than likely it will not, this product is specifically for the larger Ronin. However you could look at getting an Atom Clamp and a ProMediaGear Shoe Mount. Theses two products would provide you with a very similar result.https://bhpho.to/2Hzmp50https://bhpho.to/2gma4Tk

Yudi	23/09/2024
[1.2 oz / 33 g] After dropping and cracking the factory supplied shoe stand for my flash, I was afraid that the Vello wouldn't do as good of a job. The Vello shoe stand is AWESOME! Not only does it work fine, it's thicker and sturdier than the original stand I had. 5

Bryan	14/09/2024
[1.2 oz / 33 g] this plate serves it's intended purpose super well. i wish i could figure out a good solution to use this plate and be able to keep rails centered under my lens, too is the only thing 5

anyonymous	02/09/2024
[Aluminum] I bought this with a Vortex scope for hunting with an AR and have no complaints at all. It's held on through two seasons and kept zero when unmounted from the receiver. 5

Larry	17/08/2024
[1.2 oz / 33 g] This shoe stand is well built and has a big footprint. It securely holds your flash and a remote trigger easily while still being balanced and steady. 5

Michael	15/07/2024
[1.2 oz / 33 g] Necessary if using for Blackmagic 6k, you may still need the counterweight. 5

Brian	07/07/2024
[1.2 oz / 33 g] I got this for use with a Ronin S and a black magic 6k. It works but you need to get a counter weight also, or at least I did because of the weight of a canon cine lens. I have balanced a black magic 4K with micro 4/3 lens with the standard plate and no counter weight. 5

Garen	03/07/2024
[Aluminum] I mount Canon flash on this stand for remote triggering 5

Guadalupe	17/06/2024
[1.2 oz / 33 g] B&H had several mini flash stands to choose from for replacing my lost one. This one looked ugly, but what interested me was its footprint is much more wider and longer than the Canon OEM. If some one were to run into a table where my flash is sitting on it, its geometry is not going to allow my flash to topple over. Its wide foot holds my 580EX II tightly. There is also a brass insert on the bottomside for mounting it to anything that accepts the thread size. Like a monopod or one of those big clamps. Very nice piece of work. Has a solid feel to it. Thick plastic structure. I like it. Now, what am I going to insert into the 2 other shoe mounts? 5

Robert W.	27/05/2024
[1.2 oz / 33 g] This mount works well with the AR-15 for proper eye relief. Very well made and comes with the Vortex VIP warranty. Highly recommended. 5