Camera operators who would like to attach a stabilization arm to their xSPINE vest can do so via this FLOWCINE xBONE CF Back Mount for xSPINE Vest Systemfrom FLOWCINE, which extends a standard universal socket block to the shooter's left or right. This enables it to be connected to a variety of support arms, including models from GPI Pro, Tiffen, or the xARM from FLOWCINE.

The arm can slide down on the vest's back rails to create a lower center of gravity, and its distance from the hip can be tweaked for optimal balance, depending on the camera operator's preference. With its adjustable height and ambidextrous design, the xBONE CF can be customized to be used by multiple shooters as it is passed between the A, B, and C cameras.

For xARM, GPI Pro & Tiffen Stabilizers    Adjustable Vertical & Lateral Position    Can Be Mounted Regular or Goofy    Lightweight Carbon Fiber Construction    Tilt & Roll of Standard Socket Block

The xBONE CF Back Mount extends its universal socket block off to the shooter's side, allowing proper alignment when attaching an existing stabilization arm. It is compatible with reputable manufacturers like Tiffen and GPI Pro, along with another product in the xSPINE array, the xARM.

The xBONE CF is designed to slide 225mm up and down along the center rails on the back of the xSPINE, enabling the camera operator to choose a height that is most comfortable. The strong and lightweight carbon fiber xBONE can be adjusted 80mm laterally to either create or reduce space away from the person's waist.

The universal socket block is adjustable on both the roll and tilt axes, enabling an existing stabilization arm to be positioned according to the specific needs of the shooter.

The front mount can be secured either regular or goofy, accommodating both left- and right-handed shooters.

Related Questions and Answers

Q: 1. Can you send me a list of what all comes in this purchase?

A: Black Complete takes 5-32 kg (11-70 lbs)TranquilizerPro Case

Q: 2. Do I need to buy the FLOWCINE Serene with Extension arm if I own the EasyRig Vario 5 with 5" Extension arm? Or is this more for operator preference?

A: The Flowcine Serene Arm is an accessory for the EasyRig Vario 5 that will add more stability.

Q: 3. How long will this unit supply 600 W when running on battery? That is, what is the Watt-Hour rating?

A: The APC BE1050G3 Back-UPS System (BH #APBE1050G3) is able to run at full load at 600W for approximately 2 minutes. For a half rated load it is approximately 9.5 minutes.

Q: 4. Will the tilta mirage 95mm mattebox fit on this lens seeing as the front diameter is also 95mm?

A: Yes, the Tilta Mirage has a 95mm clamp that will allow it to attach to lenses that have a 95mm outer diameter.

Q: 5. Can the spring be locked out for use. Ive heard that some people say it can be bouncy if you are doing non gimbel shots where you dont walk ?

A: This is not an issue we have heard of. To answer your question, the Serene can not be locked off. You can turn the spring force all the way up so it does not flex. Once you are finished with your shot, be sure to reduce the spring tension to save wear. You might be interested in the new Line Guide for Serene. It may align the string better for you. It is brand new and not yet here at B&H. http://easyrig.se/page/top-secret-from-easyrig

Q: 6. Does it come with a bungee cord as per manufacturer's page?

A: The Bungee Cord is not included with the FLOWCINE Small Hook for Serene Bungee Grip. The Bungee cord can be added as an optional part - https://bhpho.to/35zzJEq

Q: 7. Do the cutaways at the front of the lens interfere with a mattebox?

A: The design on the front of the lens will not interfere with the use of a mattebox.

Q: 8. Will this rig support a basic Sony FS7 setup?

A: This tripod has an 8.8 pound load capacity. If you keep the total weight of the FS7 below that you may be able to use it, but we do not recommend this tripod for a camera like the FS7. We recommend an FSB 6 based system instead, which has a load capacity between 3.3 - 17.6 pounds. https://bhpho.to/2GWZfEd

Q: 9. Could the serene be mounted on an Easyrig Cinema 3 ?

A: Yes, you will be able to mount this pn the Easyrig Cinema 3.

Q: 10. Where can I get a replacement for the rubber band that helps control movement with the easy rig?

A: For Flowcine replacement parts, please contact them directly. a href= http://www.flowcine.com/contact-us. target= _blank www.flowcine.com/contact-us./a For EasyRig replacement parts, please contact them directly as well. www.easyrig.se/page/contact.