The Kirk BL-Z7II L-Bracket for Nikon Z 7II Z 6II Z 5from Kirk BL-Z7II L-Bracket for Nikon Z 7II Z 6II Z 5is designed with anti-twist flanges that prevent unwanted camera movement within the bracket. Its Arca-type compatible dovetail design enables the camera to mount in a vertical or horizontal position when shooting together with a tripod and compatible head.

The black anodized 6061-T6 aluminum L-bracket has a slotted design for side port access and does not block the LCD monitor from tilting. It allows access to controls, ports, and the battery door, and has a hand strap loop machined on the right-hand side. The base incorporates a stainless steel QD (Quick Disconnect) System receiver for a sling or shoulder strap. The included 5/32" short hex wrench is used to tighten the L-bracket to the body and then can stored via the built-in hex wrench storage system. A 1/4"-20 mounting hole is located on the bottom and sensor centering lines are on the back for precision the camera alignment can on a tripod head. The BL-Z bracket is compatible with the FTZ adaptor but will only work when there is not an L-bracket or plate attached to the FTZ adaptor.

NOTE: The BL-Z7 II does NOT fit the Nikon Z 7 or Z 6 camera bodies.

Arca-Type Compatible Dovetail Mount    Anti-Twist Flanges    Slotted Design for Side Port Access    Access to the Battery Door    No Interference with LCD Screen Movement    Sensor Centering Lines on Each Axis    Black Anodized 6061-T6 Aluminum    Built-In Hex Wrench Storage System    Machined Hand Strap Loop    Compatible with FTZ Adaptor

• Change vertical or horizontal orientation without losing the center of axis

• Arca-type compatible dovetail design

• Sensor centering lines on the rear of bracket

• Complete access to battery door and camera ports

• No interference to LCD screen movement

• Compatible with the FTZ adaptor

• Compatible with the industry standard QD (Quick Disconnect) System

• Machined from black anodized 6061-T6 aluminum

Related Questions and Answers

Q: 1. Will this L-plate work on a BENRO VX20 Ball Head on a BENRO BAT tripod?

A: Yes, the Kirk BL-Z7II L-Bracket for Nikon Z 7II, Z 6II, and Z 5 will work with the BENRO VX20 Ball Head attached to the BENRO BAT tripod.

Q: 2. Have you verified yet that this plate will or can be made to fit the Z6 III ?

A: Yes, the Kirk PZ-186 Camera Plate for Nikon Z 7II, Z 6II, Z 7, Z 6, and Z 5 is also fully compatible with the Nikon Z6 III Mirrorless Camera.

Q: 3. Will this leave enough space to ensure a secure grip on a tripod if a Cotton Carrier CCS Flat Camera Hub is installed to it?

A: I would suggest using the Cotton Carrier CCS Arca-Type Universal L-Bracket (B&H # CO222CLB) with this setup, because it's designed to work with the CCS Hub and allow for secure clamping.

Q: 4. Will the quick disconnect slot fit really right stuff dc?

A: Yes, Kirk QD Quick Disconnect Push Button sytem is the same as RRS QD. If you already own Really Right Stuff QD Strap Swivel (D-Loop) it will connect with Kirk BL-Z7II L-Bracket for Nikon Z 7II, Z 6II, and Z 5.

Q: 5. Will this bracket work with the new Nikon z 6iii?

A: Unfortunately, the Kirk BL-Z7II L-Bracket for Nikon Z 7II, Z 6II, and Z 5 will not work with the Nikon Z6 III Mirrorless Camera. The Kirk L-Bracket for Nikon Z6 III (B&H # KIBLZ6III, MFR # BL-Z6III) is the correct product.

Q: 6. Will this work with Blackrapid camera straps?

A: The Kirk BL-Z7II L-Bracket for Nikon Z 7II, Z 6II, and Z 5 is directly compatible with BlackRapid straps that have the QD connector. For the BlackRapid straps without the QD connector one can use the Kirk QD Quick Disconnect Push Button Swivel-D, BH #KIKQDDLOOP (https://bhpho.to/3dwmMzs).

Q: 7. Exact size? I am trying to add this to a non-Arca L-bracket (Wephoto).

A: While we do have the weight of the Kirk PZ-186 Camera Plate for Nikon Z 7II, Z 6II, Z 7, Z 6, and Z 5 listed as 1.5 oz (43 g), as of the date/time of this reply, we do not have the dimensions of the Kirk PZ-186 Camera Plate.

Q: 8. Can the PZ-186 attach to the bottom of an MB-N10 battery grip?

A: Yes, the Kirk PZ-186 Camera Plate fits on the bottom of the MB-N10 battery grip.

Q: 9. Can the FTZ adapter be used with this plate?

A: Yes this can be used along with the Nikon FTZ adapter.

Q: 10. Will this work with the Nikon z6?

A: Unfortunately, the Kirk BL-Z7II L-Bracket for Nikon Z 7II, Z 6II, and Z 5 is not compatible with the Nikon Z6.