Louroe Tlsp Corner Mount Speaker & Microphone

Product Code: eq8376
Availability: In Stock

$987.00 $1,480.50

Qty

6 reviews Write a review

Description
Reviews (6)

The white TLSP Corner Mount Speaker & Microphone from Louroe Electronics is a two-way talk / listen speaker and microphone with built-in electret condenser microphone and a 3” speaker. Its 18-gauge CRS vandal-resistant housing is especially designed for mounting it in a corner or between a wall and a ceiling. When part of a Louroe Audio System, TLSP Corner Mount provides listen and talkback capabilities between the remote area and the Louroe base station. It also has a built-in sound path that protects both the speaker and the microphone from abuse.

Microphone
Type	Electret condenser
Output	Line Level (0 dB @ 1 KΩ)
Output Impedance	Mic Only: 600 Ω unbalanced
Frequency Response	40 Hz to 15 kHz ± 1 dB
Current Drain	4 mA
Supply Voltage	12 VDC
Speaker
Power Rating	2 W
Input	70.7 V constant
Frequency Response	300 Hz to 4 kHz ± 1 dB
Impedance	8 Ω
Speaker Size	3.0" (76.2 mm)
Wiring	Requirements: 4 conductor wires consisting of 2 conductor-shielded wires, 20 gauge with 22-gauge drain (microphone connection) and 2 conductor-unshielded wires, 18-gauge (speaker connection), all in the same jacket
Dimensions	Face: 8.75 x 6.00" (222.25 x 152.40 mm)
Weight	3.0 lb (1.4 kg)

Vandal-resistant, 18-gauge CRS housing

Mounts in a corner or between a wall and a ceiling

May be mounted up to 1,000' (305m) from Louroe Base Station

Phantom powered from the Louroe Base Station

Microphone can pick up normal sounds that are 15' (4.57m) away or within a 30' (9.14m) diameter circle

Applications: Correctional facilities, transportation terminals, juvenile facilities, public access areas, parking structures, and areas where vandalism is a concern

Related Questions and Answers

Q: 1. WILL IT WORK WITH A LOUROE DUPESS GUARD DG-25 II SYSTEM?

A: These two systems are compatible with one another.

Q: 2. There's only one knob. Does that mean the other 1" square tube is permanently attached to the corner?

A: Both tubes are removable. One is secured with a t-handle and the other is secured with a set screw. This is designed to allow for the frames to be stored easily and half built, also so the t-handles don't interfere with one another.

Q: 3. Is a power supply plug in class 2 included?

A: The Louroe MLA-4 does not include an AC adapter.

Q: 4. can i plug the LE-077 directly into an Access camera or do i need an amp/mixer and if so what model? we have lot of background noise in an interview room where we cannot hear a soft voice over the noise will this work for us?

A: Yes you can plug this microphone to an Axis IP camera just power it with a 12Vdc 500 miliamps.Terminal block ABCA= power positive B audio positiveC= negative or ground from the power supply and the microphone to the IP cameraif you have any more questions you can email to techsupport@a href= http://louroe.com target= _blank louroe.com/a

Q: 5. Hi there. What is the maximium diameter pipe it can accept?

A: The Matthews Hollywood Corner - Set of 4 BH #MAHWC is designed for 1" square tubing.

Q: 6. Does this platform include the pictured mount?

A: The Arca-Swiss mount on the bottom of the Oben TLSP-1614 Tripod and Light Stand Platform (16 x 14") is built into the platform and is not available separately.

Q: 7. does this unit work with HIKvision NVR? how it connected?

A: Hello, this microphone designed to work with a computer connected to the USB port.if you need a microphone for an IP camera I will recommend the Verifact A with AD-1 power supply.if you need more information send me an email to techsupport@louroe.com

Q: 8. Can this connect to an PoE IP cam that has 2-way audio?

A: Yes the Louroe TLMC-W 2-Way Call Station could connect to IP cameras that support Analog Audio connections.

Q: 9. Can the K&M 24110 Speaker Wall Mounts be used with the Peavey PV 115 Two-Way 15 Passive Speakers? If so, are there any additional adapters or hardware needed?

A: Yes they can. The speakers just slip over the pole on the wall bracket. There will be a corresponding hole in the bottom of the speaker. Each speaker weighs 53 lbs. The stand support rating is 110.2 lbs so you should be fine. If the hole is a bit large for the pole mount. You can buy a rubber sleeve that will make it thicker or just wrap some gaffers tape around the pole till the speaker is a snug fit.

Q: 10. Can I fit two Hercules MS201B Microphone stands with bases?

A: Yes it can fit. The dimensions of the bag are:48.8 x 9.6 x 6.0 The dimensions of the stand when it's folded are:Folded: 35.8 x 10.5 x 1.4 The dimensions of the base of the stand are:Radius: 4.7

AST, LLC	07/09/2024
[3.0 lb (1.4 kg)] Installs in a wall or drop ceiling easily w/cut-in box. Very sensitive. Unobtrusive. 5

Dale	02/07/2024
[4 mA] I used this mount for my DS-2DY3220IW-DE PTZ camera. It's a pretty heavy camera and needs a solid mount. I put 5/16 galvanized lag screws through vinyl siding, 3/4 plywood sheathing, and into doubled 2x4 walls to hold it. I was able to hang on the mount without it budging. Unfortunately, it doesn't have holes patterned for the camera so I had to drill my own. All the other holes that it does have are threaded so, assuming you have a camera it is intended to match, you can simply screw on your camera; piece of cake. If you need a corner mount, this is a great bargain for a solid piece of drilled, painted, bent, metal. You couldn't make this mount for 3 times the price and hours of work. 5

Dan	24/06/2024
[8 Ω] Extremely solid mount for any camera. 5

Sharon	18/06/2024
[3.0" (76.2 mm)] Placed on a dock over the river, this mic brings the outdoors into my home, with eagle song and water music. Nothing sounds better! 5

John	02/06/2024
[2 W] This is strong and solid. Highly recommend for ptz 5

Brent	19/04/2024
[3.0 lb (1.4 kg)] Works great to mount the N45EYN2 dome cameras in conjunction with the PFA137 mount. These things are heavy, solid, and durable. I had to use my own mounting bolts to attach it to the house. 5