Designed for the rigors of ENG and EFP production, the OZEN Agile 18M E-Z LOAD MAX Fluid Head & Tripodfrom OZEN Agile 18M E-Z LOAD MAX Fluid Head & Tripodcombines the Agile 18 E-Z LOAD MAX fluid head with the 100CF1HD 100mm half ball, single-stage, heavy-duty carbon fiber tripod. This system supports camera rigs weighing 4.4 to 48.4 lb and features a wide E-Z LOAD MAX balance plate for increased stability, even with longer lenses.

The Agile 18 E-Z LOAD MAX head offers 16-step counterbalance, 9 levels + "0" of pan and tilt fluid drag, and two telescoping pan handles. The 100CF1HD carbon fiber tripod has a height range of 28.7 to 58.7" and comes with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces. The soft carrying case incorporates an internal pouch for storing the handles and includes a shoulder strap.

100mm Heavy-Duty Carbon Fiber Tripod    Agile 18 E-Z LOAD MAX Fluid Head    Counterbalanced Payload: 4.4 to 48.4 lb    16-Step Counterbalance    9 Levels + 0 Pan/Tilt Fluid Drag    1-Stage, 2-Section Legs    Tripod Height Range: 28.7 to 58.7"    Contender Heavy-Duty Mid-Level Spreader    Deep-Tread Rubber Feet    Soft Carrying Case with Internal Pouch

Wide balance plate improves stability when working with longer lenses

Related Questions and Answers

Q: 1. Can the feet come off?

A: Yes. The feet can come off this tripod system. The Viltrox VX-18M Heavy-Duty Video Tripod with VT-01 Fluid Head BH #VIVX18M • MFR #VX-18M

Q: 2. Can this bar be used on the Ozen Agile 15?

A: Yes the OZEN Extending Pan Bar PB-2 works with all Ozen Agile head models including the 15.

Q: 3. Is the head removable/able to swap?

A: Yes it is removable but the base of the tripod is an uncommon size (60mm). Most video heads are 75mm or 100mm. If you would like to swap the head you would need to find another 60mm video head.

Q: 4. I see 2 different mid-level spreaders. Does this come with the barrel twist or lever?

A: The OZEN 100CF2HD 100mm Carbon Fiber Tripod uses flip brake levers.

Q: 5. does bh sell a tripod that's basically the same functionality as the padcaster ( BH #THPCTRIPODG2 ), but can handle 20lbs? Specifically, 71" height, with a more narrow footprint like the padcaster. I shoot indoors in cramped spaces, so appleboxes is a non starter and would slow my workflow dramatically. Also the boom-able center column is a must, since I can set it in the middle and save adjusting all 3 legs, instead just adjusting the locking center column. For same reason, prefer flip lock legs, saves time. The leveling half base (the orange part of the padcaster on the center column, bottom half of the fluid head) is exceptionally useful for leveling, and the fluid head / flat video head design is most reliable (contrasting the sirui BH #SISUW2204K20 ballhead, which I wouldn't feel comfortable putting my cage/camera/monitor/98wh batterry on) budget is $300-500. is the best route to piece this together? would need the 71" height, the fluid head base (once again, not for recording camera movement, but for video head platform reliability, to use w/ a cage/rails/98wh battery/monitor system). and the center column w a hook to add a sandbag.

A: You could consider the Manfrotto 502AH Video Head & MT055XPRO3 Aluminum Tripod Kit, which holds up to 22lbs, has foot print similar to the Padcaster Fluid Head Tripod/Monopod, but it only reaches up to 67" instead of 71". See: https://bhpho.to/3Ro8AXN

Q: 6. Is the S-Loc plate system compatible with Manfrotto-style plates?

A: Yes, the S-Loc quick release plate system is compatible with Manfrotto style quick release plates such as the 501PL.

Q: 7. Does this work with DSLR?

A: Yes, the following tripod will work with both high end video/ slr cameras. will support a payload of 13 lbs

Q: 8. What are the dimensions of the pan bar (length and diameter) when full collapsed?

A: The pan bar itself (not the thicker section near the clamp and not the grip handle) of the OZEN Agile 5S S-Loc 75mm Fluid Head (B&H# OZAG5S) is approximately 3/4" (19mm) in diameter. The length of the pan bar including both the thicker section (where it starts) until the bottom end of the grip handle is approximately 15" (38cm) in length when measured from the start, to the elbow bend, and then from there to the opposite end of the pan angled bar.

Q: 9. Is the 22 inches length with the head still on, or does it get even shorter with the head removed?

A: The 22 inches length is with the head on. With the head off it will be about 18 inches.

Q: 10. Is this compatible with blackmagic designs 4k pro g2 ?

A: Yes.