The OZEN AGILE 25 Fluid Head with Carbon Fiber Legs & Caseis a heavy-duty fluid head featuring a wide camera interface for steady support of camera rigs weighing up to 80 lb. The 150mm ball base can be converted to a flat base for lower-profile, slider, or car rig applications. A Build-Lock system provides your gear security and you with peace of mind when assembling your camera and accessories on the head. The camera platform has 4.72" of travel for balancing the camera forward and back.

This head's familiar placement of pan, tilt, and counterbalance controls offer comfort and ease while operating, and the 150mm ball base enables fast leveling. This fluid head features nine steps of pan and tilt drag plus a "0" setting for whip pans, 16 steps of counterbalance adjustment, and a built-in illuminated bubble level. Independent pan and tilt locks allow you to lock off one axis and still move the head on the other axis. Replaceable pan handle rosettes on the left and right side of the head enable you to use both included telescoping handles simultaneously.

Convertible 150mm Ball/Flat Base    9-Step + "0" Pan and Tilt Drag    8.8 to 75 lb Payload Capacity    2-Stage Carbon Fiber Legs    16-Step Counterbalance on Head    E-Z LOAD Quick Release Plate    Camera Platform Has 4.72" of Travel    Independent Pan and Tilt Locks    Built-In Illuminated Bubble Level    2 x Telescoping Pan Handles

The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6" diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or other compatible support.

A 16-step counterbalance enables you to adjust the head for a variety of camera rigs weighing from 8.8 to 80 lb. A counterbalance system neutralizes the weight of the head, so it will hold the desired tilt position.

Nine steps and a zero setting enable you to adjust the head for smooth moves, fast or slow. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.

The Build-Lock system allows you to engage a safety pin with the tilt at zero, preventing the tilt axis from moving, while you assemble the camera on the head without having to worry about stressing the pan lock or having the head tilt suddenly under an unbalanced load. Once the camera and accessories are assembled (built) and roughly centered on the head, release the pin and fine-tune the balance on the head.

The E-Z LOAD QR plate supports heavier camera rigs, pops in and out of the camera platform, and does not have any sliding balance adjustment. However, the camera platform that the plate pops into has 4.72" of back and forth adjustment to aid in balancing your camera on the head. The use of an optional baseplate or VCT system for increased balancing ability is customary with larger cameras.

Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.

Related Questions and Answers

Q: 1. How much does this weigh overall?

A: 14.25 pounds

Q: 2. what are the dimensions of this tripod when completely compacted?

A: The closed length of Manfrotto 635 FAST Single Leg Carbon Fiber Tripod legs is 28.94". Manfrotto 504X Fluid Video Head with Flat Base is 4''Hight, combine together it has a total length of 32.94''.

Q: 3. Can this bar be used on the Ozen Agile 15?

A: Yes the OZEN Extending Pan Bar PB-2 works with all Ozen Agile head models including the 15.

Q: 4. What size is the thread on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 5. Where are the legs and head made?

A: This tripod is manufactured in Italy.

Q: 6. Can the pan bar be switched from the right side of the head to the left side?

A: Yes, there is a rosette mount on both sides of the tripod head.

Q: 7. I ordered the model with ground level spreader. If I want to add a mid level spreader, what model/part is that? Also, does it include protective feet if I remove the ground spreader, or do I need to buy them separately?

A: You would need the Manfrotto Mid Level Spreaders (MA537SPRB). The rubber shoes for the tripod would be separate, the part number for them is MA565.

Q: 8. Is this a drop-in style quick release or only slide in?

A: The plate is a slide in.

Q: 9. What is the Maximum height of the tripod?

A: Maximum Height 61.02" / 154.99 cm

Q: 10. Will this tripod hold a black magic ursa Broadcast camera?

A: Yes, it will support the Ursa Broadcast.