The Sony FX6 Wooden Camera Accessory Kit Gold Mountsupports 15mm LWS rods at the correct lens height, and it offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit. This Kit allows you to support different lens adapters from Wooden Camera, Metabones, and other brands.

The Baseplate includes the Core Unit, a Lower Quick Dovetail tripod plate on the bottom, and a Dovetail Camera Plate for the Blackmagic URSA Mini and Sony F55/F5. Other Unified Baseplate Dovetail Plates are also supported, allowing for quick swaps with a variety of cameras.

The Baseplate provides two quick release options. You can remove the Dovetail Camera Plate only and leave the Core Unit with your rod pair behind, or you can remove the Core Unit from the Lower Quick Dovetail, in which case you'll have a dovetail on the bottom of the Core Unit that's compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig.

The Dovetail Camera Plate features a long slot along its center that lets you secure it to the camera with multiple screws (included), which can be set up to 2.8" (70mm) apart. It also has a non-slip rubber surface that will prevent the camera from twisting.

The Dovetail Camera Plate has an ARCA Swiss standard dovetail compatible with many third-party products. It also has threaded 1/4"-20 threaded holes on the bottom for attaching to gimbals or other compatible tripod plates. The Lower Quick Dovetail has 1/4"-20 and 3/8"-16 threaded holes for attaching to tripod plates or ARRI standard bridgeplates, such as the Wooden Camera Unified Bridgeplates.

The Unified Baseplate can also be upgraded for VCT-14 compatible mounting options. Simply attach it to the optional Unified VCT Wedge Plate, which can then be mounted on the Unified VCT-14 Tripod Plate, also sold separately. The Unified Baseplate is backward compatible with Wooden Camera's original Quick Dovetails (Standard, DSLR, and Large).

Top Plate for Sony FX6    Unified Baseplate with 15mm Rod Clamps    15mm Rod Pair, 15" Long    12" Long Safety Dovetail Plate    Gold Mount Battery Plate

• Supports 15mm LWS rods at the correct lens height
• Offers a vertical 15mm rod port for incorporating the optional Unified Lens Adapter Kit (for lens adapter support)
• Includes the Core Unit, Lower Quick Dovetail tripod plate, and Dovetail Camera Plate
• Two quick release options—remove Core Unit or remove Dovetail Camera Plate
• Core Unit features a dovetail on the bottom, compatible with any 2060 Dovetail, Safety Dovetail, or Shoulder Rig
• Dovetail Camera Plate features an ARCA Swiss standard dovetail and threaded holes for attaching to gimbals or other compatible tripods plates
• Lower Quick Dovetail offers threaded holes for attaching to tripod plates or ARRI standard bridgeplates
• Long slot along the center allows multiple screws to be attached to the camera, set up to 2.8" (70mm) apart
• Anti-twist, non-slip rubber surface
• Upgradable for VCT-14 compatible mounting options
• Additional Lower Quick Dovetail and Dovetail Camera Plates can be purchased for quick swap capability
• Backward compatible with original Wooden Camera Quick Dovetail

Related Questions and Answers

Q: 1. Is it possible to mount "15mm Bracket (BH #WO213800)" at the back of this top plate?

A: Although we cannot test whether the Wooden Camera 15mm LWS Rods Bracket for RED Weapon Camera can attach to the back of the Wooden Camera Top Plate for Sony FX6, it seems like the two will fit. We recommend using ARRI Accessory Mount to 15mm Rod Clamp for a true fit. https://www.bhphotovideo.com/c/product/1352757-REG/wooden_camera_251400_arri_accessory_mount_to.html

Q: 2. Weight of this please?

A: This should weight right around 1 pound.

Q: 3. It is necessary to use a voltage regulator with this kit like that https://www.bhphotovideo.com/spanish/c/product/1622259-REG/shape_fx6pc_d_tap_power_cable_for.html or with this Tilta Battery Plate for Sony FX6 (V-Mount) se it is covered?

A: No, You would not need to add a regulator power cable. The cable comes included with the Tilta Camera Cage for Sony FX6 Vertical Mounting Kit (V-Mount) kit. Included - Tilta Battery Plate for Sony FX6 https://bhpho.to/3PVhF9u

Q: 4. Can the FX6 handle still mount in the standard position on the side bracket?

A: The Top handle can fit in its original position however if you mount the camera vertically the side handle cannot. In vertical mode the normal mounting position for the side handle is covered by the baseplate. The baseplate offers rosette mounts enabling you to use adapters to mount the side handle via the rosette mount.

Q: 5. Wooden Camera's fx3/fx30 top plate has two 1/4 20 screw holes that appear to be for this PL adapter. Is this the case? Or is there another adapter/adapter for this fx3/30 purpose?

A: No, the Wooden Camera PL-Mount To E-Mount Pro Lens Mount Adapter for Sony FX6 does not line up with the screw holes on the Wooden Camera Cheese-Style Top Plate for Sony FX3/FX30.

Q: 6. Is it possible to use this vertical cage with the c70?

A: The Tilta Camera Cage for Sony FX6 Vertical Mounting Kit (V-Mount) is designed to be used with the Sony FX6 and would not be compatible with the Canon C70.

Q: 7. Does it come with the cable to plug to the camera?

A: Yes, the cable is included.

Q: 8. Does it record in Log?

A: Yes, in fact it can't record in anything but Log.

Q: 9. Will the "Core SWX Articulating Gold Mount Battery Plate for Sony PXW-FX6" fit on this top plate with the top handle attached?

A: No it will not

Q: 10. Will this also work with FX9?

A: No, the Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) does not have the appropriate mounting for the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only). The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 is an appropriate plate. See the link below: https://bhpho.to/2DHqzEt