Add a quick release baseplate and additional accessories to your Canon C70 rig with this Wooden Camera Accessory Kit for Canon C70 Pro V-Mountfrom Wooden Camera. The durable aluminum baseplate functions as both a riser and a 15mm LWS rod support, and it features multiple accessory attachment points.

The riser baseplate features an Arca-type quick release dovetail plate with a 3/8"-16 camera screw and a push/pull safety pin to keep your camera from twisting. On the front of the dovetail is a vertical rod port that allows you to add an optional vertical lens support.

The base features standard 15mm rod ports that secure with locking levers, multiple 1/4"-20 threads, and one 3/8"-16 ARRI-style accessory mount for additional gear. There is an ARRI-style rosette with an M6 thread on either side for adding a handgrip or extension arm. The bottom of the plate features an ARRI-standard dovetail mount and a quick dovetail plate with multiple threads to mount the baseplate onto a bridge plate or rig.

15mm LWS Baseplate & Arca-Type QR Plate    Top Plate, Mini Top Handle    2 x 12" Long 15mm Rods    12" Long Safety Dovetail    V-Mount Battery Slide Pro    Multiple Accessory Mounting Options    1/4"-20 & 3/8"-16 Threads, 2 x Rosettes    Durable Aluminum Construction

Canon C70 camera

Also compatible with but not limited to:

Wooden Camera Quick Release Bridgeplate (19mm) 277000

Wooden Camera Quick Release Bridgeplate (15mm Studio) 277100

Related Questions and Answers

Q: 1. What voltage is it regulated to?

A: The Wooden Camera D-Tap to DC Barrel Power Cable for Canon C70 would work with the propter voltage for the Canon C70 camera which would be the following.(11.5 to 20VDC) Input.

Q: 2. Does this kit come with a shoulder pan or just the plate?

A: The Wooden Camera Elite Accessory System for Canon C400 (V-Mount) does not include a shoulder pad, only the Wooden Camera Safety Dovetail Plate (8").

Q: 3. It looks like the side would block being able to plug in an HDMI cable?

A: The HDMI cover can be opened freely when using the Tilta Base Accessory Mounting Plate for Canon C70 (Black).

Q: 4. Can the Wooden Camera Arca-Type Dovetail Camera Plate included in this package mount a C70 directly into the DJI RS2? If not, is there a good way to use this system with the DJI RS2?

A: The Wooden Camera Arca-Type Dovetail Camera Plate cannot mount on the DJI RS2. You will need to attach an additional lightweight baseplate to the DJI RS2 quick release plate.

Q: 5. Does the Left-Side NATO Safety Bracket only attach to the top plate or does it also attach to the bottom of the camera?

A: The Wooden Camera Left-Side NATO Safety Bracket for Canon C70 attaches to the Wooden Camera C70 Top Plate only.

Q: 6. Hello! Would this support SmallHD 702 monitor reliably? Thank you

A: No. Unit is made and designed for the C70 series.

Q: 7. Will the top mount for the handle and accessory work with the Red Outrigger handle?

A: Unfortunately not, neither allow for mounting of the other.

Q: 8. Is it possible to attach the Canon Handle Unit (the leather strap) to the right side of the camera with this setup?

A: No, the handle is made and designed to fit on the right hand side.

Q: 9. Is the cage compatible with the new BMCC6K Full Frame?

A: Including the Wooden Camera Unified Accessory Kit for Blackmagic Pocket Cinema Camera 6K, there are no cages that accommodate the new Blackmagic Cinema Camera 6K L mount at this time.

Q: 10. Does the handle allow you to power and control (focus) a Nucleus nano motor?

A: No, But the included handle will support start and stop recording on the connected Canon C70.