Power your professional camera gear for long shoots with this high-capacity Bescor VBD98 2-Battery Dual Charger Kitfrom Bescor. The 74.9Wh lithium-ion battery is compatible with Panasonic cameras and gear that accept a VW-VBD98-type battery. It features a 10,400mAh capacity and 7.4 VDC power output, and a four-LED status indicator can check your battery level with the status check button.

2 x VBD98-Type Li-Ion Batteries    VBD98 Dual-Bay Charger with AC Cable    74.9Wh, 10,400mAh Capacity    7.4 VDC Power Output    4-LED Status Indicator, Check Button

Related Questions and Answers

Q: 1. Will this work with a Frezzi mini-fill?

A: If you have a 4 Pin XLR connection on the light, yes.

Q: 2. will it work with the new black magic URSA??

A: I bought this to light a custom made LED light. So I don't know about Black Magic camera. I do know it comes with 4pin XLR OUT, and it is rated at 12V. Don't know the power consumption rate of Black Magic. It may not last too long.

Q: 3. HI there. I just bought MOTU MK3 traveler which can be powered by external 4pin XLR connector, requires between 10-24V. Would this battery be suitable please? And how long could I expect it to run, I'm planning to use 2 condenser microphones which need 48V power supply.Thank you.

A: We reach out to MOTU on your behalf and they confirmed for us that this Bescor Battery will indeed work with the Traveler-mk3. If you have any other questions regarding powering the MOTU Traveler feel free to ask them in the Q&A on that product's page.

Q: 4. Will this power a Sony HVR-S270? I'm not sure if I can use a 12V battery for the 270 or if it has to be a 14.4V.

A: This battery may work with the Sony HVR-S270, however with the output being lower than the camera's needs I would not recommend it. For another solution IndiPRO tools has an inexpensive V-Mount Battery and Charger kit that you can use directly on the camera. This will work and it will be a bit more convenient to set up.

Q: 5. will this battery work with fretzi mini-fill?

A: Yes, just as long as the Mini Frezzi has a 4-pin XLR connection.

Q: 6. Would this charger work with an NRG Varalux light with a 4 Pin XLR? I'm assuming any 4 pin XLR connector would work with it, but the comment about powers select ENG cameras & LED lights made me question that. Thank you!

A: I think so, as long as your light runs on 12v and has a 4 pin XLR connector. I'm using this battery to power a Panasonic GH4 - DMW-YAGH Video Interface Unit in the field. It works great for that and let me film all day on a single battery.

Q: 7. will this power and fint the 12v connection for the Blackmagic Video Assist 4K?

A: This battery solution can provide 12 volts which the Video Assist 4K can run off. The power plug is unfortunately not compatible with the Video Assist 4K. The Video Assist 4K uses a 2.5mm barrel port and this power cable can be considered to make the connection from the battery to the Video Assist 4k. Bescor XLR Male to 2.5mm Barrel Plug B&H # BEXLRM25PP MFR # XLRM25PP. https://bhpho.to/36GROMH

Q: 8. Is this compatible with the Lowell idLight?

A: I found that the battery pack was not able to run my 100 watt halogen camera light at its maximum brightness, but was able to run it at about 60% of its brightness. This battery pack is very light and small, compared to my old lead acid battery pack that was very heavy and cumbersome. I would highly recommend this battery pack for operating a 50 watt halogen camera light.

Q: 9. How long can a BMPCC4K run on this?

A: This is a 98Wh battery, which is around 7 times higher capacity than the LP-E6 batteries the camera normally uses. You should expect to get 5-6 hours out of this battery depending on the shoot conditions and settings you use.

Q: 10. Will this battery void my FUJIFILM GFX 50R warranty?

A: According to the Fujifilm warranty, "This limited warranty does not apply and may be voided if the Product has been used with incompatible accessories or a third party device", so it is possible.