Ikan Homestream 6" Accent Light With Table Stand

Product Code: eq84807
Availability: In Stock

$299.97 $464.95

Qty

14 reviews Write a review

Description
Reviews (14)

Often used in kits, this Ikan Homestream 6" Accent Light with Table Standfrom Ikan Homestream 6" Accent Light with Table Standis an LED fixture with edge-lit LEDs and variable color from 3200 to 5600K and a high CRI of 95, indicating advanced accuracy in color rendition. The light has a soft 75° beam spread and comes bundled with a tabletop light stand that has an adjustable height from 13.75 to 21.5". The light can run on AC power or optional NF-F batteries to provide up to two hours of runtime.

6" Diameter LED Fixture Color Temp: 3200 to 5600K, CRI: 95 Adjustable Height Stand: 13.75 to 21.5" 75° Beam Spread

Key Specs
Item Type	1x LED Round Light
Included Storage Case	Yes
Photometrics	Unspecified Color Temperature: 24 fc / 262 Lux at 3.3' / 1 m* 97 fc / 1050 Lux at 1.6' / 0.5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	3200 to 5600K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	CRI 95
Dimming	Built-In Dimmer
Front Accessory Mount	No
Power Source	AC to DC Adapter (Included) Battery (Not Included)
Battery Plate Type	1x Sony L-Series / NP-F (Built-In)
Battery	Per Light: 1x Rechargeable (Not Included)
Input Power	100 to 240 VAC, 50 / 60 Hz 7.4 to 14.8 VDC
Fixture Mounting	1x 1/4"-20 Female Thread
Light Fixture
Item Type	1x LED Round Light
Included Filters	Diffusion (Built-In)
Included Storage Case	Yes
Photometrics	Unspecified Color Temperature: 24 fc / 262 Lux at 3.3' / 1 m* 97 fc / 1050 Lux at 1.6' / 0.5 m *Standardized Measurement Calculated Internally Based on Closest Distance
Color Temperature	3200 to 5600K
Color Modes	Daylight, Tungsten
Color Accuracy Standard	CRI 95
Dimming	Built-In Dimmer
Cooling System	Passive
Beam Angle	75°
Built-In Flash	No
Preprogrammed Effects	No
Umbrella Mount	No
Front Accessory Mount	No
Connectivity
Mobile App Compatible	No
Power & I/O
Power Source	AC to DC Adapter (Included) Battery (Not Included)
Inputs/Outputs	1x Barrel / Coax Power Input (7.4 to 14.8 VDC)
Battery Plate Type	1x Sony L-Series / NP-F (Built-In)
Battery	Per Light: 1x Rechargeable (Not Included)
Input Power	100 to 240 VAC, 50 / 60 Hz 7.4 to 14.8 VDC
Included Adapter / Cable	1x USA Type-A/B to Barrel / Coax AC to DC Adapter
Inline Switch	No
Power Pass-Thru	No
Mounting
Included Light Stand / Mount	1x Tabletop Stand with Ball Head • Height: 13.75 to 21.5" / 34.9 to 54.6 cm
Fixture Mounting	1x 1/4"-20 Female Thread
General
Display	Yes
Environmental Resistance	No
Operating Conditions	32 to 122°F / 0 to 50°C
Materials	Aluminum (Housing)
Dimensions	ø: 7" / ø: 17.8 cm (Fixture Panel)
Weight	0.9 lb / 0.4 kg
Packaging Info
Package Weight	8.8 lb
Box Dimensions (LxWxH)	16.2 x 12.7 x 4.6"

Detachable edge-lit LED light
Battery powered using L-style battery (not included)
Color temperature range: 3200 to 5600K, CRI: 95
Adjustable stand height: 13.75 to 21.5"

Related Questions and Answers

Q: 1. What is the difference between Ikan HS-VCD and HS-VCD-2 besides the USB adapter cable?

A: The USB adapter cable is the only difference.

Q: 2. When I'm taping myself I use the flip screen on a DSLR to get the framing right. Will this teleprompter cover the viewing of that flip screen?

A: It may cover the flip out screen, depending on the camera. We recommend plugging in an external monitor that sits on the side of the teleprompter so that you can see the framing there, or even your laptop using a camera remote app, depending on the capability of your camera.

Q: 3. How is this different from the much cheaper, but identical-looking Desview T2?

A: Ikan offers USA based support and a a larger array of foam and mounting rings.

Q: 4. can the pole be unscrewed from the base?

A: Yes the pole can be unscrewed from they base, they are two separate pieces.

Q: 5. I'm looking at this to use with my Nikon Z7 & Z6 cameras. I'm trying to figure out how this device gets supported. Does it literally hang off the front lens threads? Does it require being separately mounted and mated to the lens?

A: There are two methods of mounting the teleprompter. 1. Yes, since the prompter is so light, you can hang if off your cameras lens. Adapter rings are provided for this. 2. On the base of the main frame of the prompter there are 3 x 1/4"-20 threads. You can then mount it to most any tripod or other stand.

Q: 6. Can the tablet be used in vertical mode or only landscape?

A: This is designed for the tablet to be set up in a landscaped position. However if the tablet is small enough and the App you are using works in portrait it can be connected as well.

Q: 7. What size is the mounting screw?

A: The mounting screw is 1/4-20", the same size as the camera tripod thread.

Q: 8. Wondering where I can get a replacement part for this. The connector piece that attaches the teleprompter to the light stand?

A: Hello, This is the replacement SKU: E-Image 5/8" Female Baby Pin to Male 3/8" Thread Adapter BH #EIMT019 • MFR #MT019. Thanks, Bryan

Q: 9. What size is the glass on this teleprompter?

A: The ikan HomeStream Smartphone Display Teleprompter glass, when measuring diagonally is 8” inches.

Q: 10. Will this work with a Sony FX9 camera?

A: It is possible to use the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only) with the ikan Elite Tablet & iPad Light Stand Teleprompter since the teleprompter and camera are mounted to their own stands.

Steven	17/09/2024
[3200 to 5600K] Had a problem with a friend who wanted to get into film production again after a long hiatus and needed her collection of DVD-R demos transferred to computer for editing. I was attracted to this item in particular because it promised Linux support; ended up using Windows 10 with an upscaling blu ray player. Learned the hard way that programs like OBS Studio, Openshot, Handbrake, and Clipchamp had built-in masks for camcorder and phone aspect ratios and severely cropped the DVD player source picture. I lucked out with trying VLC Media player and it framed and I was able to record the DVD picture honest to the DVD original. VLC saved the project. 5

Clay	11/09/2024
[8.8 lb] I needed an inexpensive mic arm for zoom calls. It holds my mic and is easy to maneuver. If you need something basic, look no further. 5

Aleksandar	21/08/2024
[Passive] Well engineered and easy to transport 5

Matt	19/08/2024
[Yes] I have a years-old teleprompter for a tablet, but I use a mirrorless camera as a webcam at my desk, so to record videos in closer quarters, I needed something to attach to my mirrorless camera that was also small enough not to consume lots of extra space and require moving my desk around. This product is extremely well designed. I was initially concerned that it literally hangs from the lens, but it's incredibly lightweight and doesn't cause the stress to the lens mount or camera mount that I had feared. When working at close-ish distances, the use of a smaller prompter is good, as you don't want your eyes darting back and forth across wide rows of text. At just three feet away (in my webcam setup with a wide lens on the camera) reading a script from my smartphone produces a perfectly acceptable level of lens eye contact.. The remote control is the weak spot, but still functional. Just cheaply made and poorly labeled. But ultimately, I was able to open the box, set everything up, write a script, load the script, and shoot a video with it within the span of an hour. While the remote tends to speed up or slow down in coarse increments, the trigger button to pause and restart the scroll means that it's easy to play at--or just above--the perfect speed, and pause it along the way as needed. 5