This 10' blue Laird Digital Cinema Canare L-3CFW RG59 HD-SDI BNC Cablefrom Laird is an extra-flexible coaxial BNC cable supporting video and data signals at rates up to 3 Gb/s. Compatible with 3G-SDI and HD-SDI video, this cable has 75-ohm male BNC connectors at each end. Its added flexibility makes it easy to coil and avoids developing resistant loops.

Canare L-3CFW Male to Male BNC Cable    Extra-Flexible Coax Cable Coils Easily    BCP-B31F True 75-Ohm Connectors    Supports 3G-HD/SDI Signals up to 3Gb/s    Meets SMPTE 259M, 292M & 424M Standards    For Professional Broadcast Use    100% Sweep-Tested

• Made with Canare L-3CFW RG59 digital video coax cable
• Extra flexibility for easy coiling 
• Suitable for professional broadcast use

Canare BCP-B31F true 75-ohm male BNC connector on each end

100% sweep-tested to conform to SMPTE 259M, 292M, and 424M standards

Related Questions and Answers

Q: 1. Will this work with the mini XLR port in the Blackmagic Pocket Cinema Camera 4K?

A: This cable is designed for a specific RED camera. The Pocket Cinema Camera 4K we recommend B&H # BLAXLRMINI2, which will work with that camera. https://bhpho.to/2BD1fi6

Q: 2. Will this work with any male BNC or do I need a special one to turn in on and off?

A: The connection size for the Canare 75-Ohm Panel Flush-Mount is standard full size BNC.

Q: 3. is this compatible with the TH-37PWD8UK?

A: Model numbers ending in UK will mean it is a European version. The parts we sell will be for USA models of monitors, this may not work. Feel free to email us directly at provideo@bhphoto.com for further assistance, we may even need to reach out to the manufacture on your behalf.

Q: 4. Is the XLR terminal a MINI?...can it be used in the blackagic pocket 6K camera?

A: Hi Angel. It is a mini XLR Male, I apologize that that info was missing. As far as using this with a Blackmagic Pocket 6K, we can't say for sure- these were designed for RED Cameras, however if the pinout is similar on the Blackmagic camera then this should work. Thanks!

Q: 5. Will this work with a PTZ controller to a PTZ cam (like PTZ optics)?

A: Yes

Q: 6. Would this cable only work on RED or would it work on any other cameras with a Mini XLR input (say BMPCC 4K)?

A: I am not using my cable on a camera, but am using it on a Velodyne subwoofer with a calibration mike. Since it is a standard gender changer, I don't see why it would not work on your camera. I purchased mine because the mini XLR connector on my Velodyne is recessed and other cables I tried would not fit in the recessed hole. This cable is very well made.

Q: 7. I have a handful of couplers from before the days of SDI video. Could I expect those to work with SDI cables or would I need to purchase this product? Thanks.

A: Regarding your question about needing to purchase the Canare BCJ-JK BNC Coupler, current SDI signals have higher bandwidth, and new couplers are recommended to ensure proper signal strength.

Q: 8. how many ohms?

A: 75 ohms

Q: 9. Is there a split cable to support Timecode and RED Control through a single cable?

A: For Timecode and control, you need this: https://www.bhphotovideo.com/c/product/1570780-REG/red_digital_cinema_720_0058_komodo_expander_module.html?sts=pi&pim=Y

Q: 10. Hello! is it compatible with the sony fx6?

A: No, The Laird Digital Cinema 12 VDC Anton Bauer D-Tap to 2.5mm would not be supported by the FX6. We recommend this as an alternate. https://bhpho.to/3JOoQ01