Proaim Mitchell Mount For Airwave V15 Vibration Isolator Arm

Product Code: eq85034
Availability: In Stock

$363.00 $493.68

Qty

19 reviews Write a review

Description
Reviews (19)

The Proaim Mitchell Mount for Airwave V15 Vibration Isolator Armfrom Proaim Mitchell Mount for Airwave V15 Vibration Isolator Armis used to mount your Airwave V15 Vibration Isolator Arm on a tripod, dolly, or another Mitchell-based support. This Mitchell-base mount features a castle nut tie-down and a 90° arm interface. This sturdy adapter mount is made from commercial-grade aluminum and supports 33-110 lb.

For Airwave V15 Vibration Isolator Arm Mitchell Base with Castle Nut Supports 33-110 lb, 90° Arm Mount Sturdy Aluminum Construction

Parameters
Mount Interface	Mitchell Mount
Payload Capacity	33-110 lb / 15-50 kg
Angle	90°
Material of Construction	Aluminum
Dimensions	Not Specified by Manufacturer
Weight	4.1 lb / 1.85 kg
Packaging Info
Package Weight	9.14 lb
Box Dimensions (LxWxH)	10 x 10 x 9.9"

Related Questions and Answers

Q: 1. In the video you can see a part in between the isolator and the power base of the gimbal. What would that be the bridge between the two?

A: There are several manufacturers that make the DJI RS2 (Power) Base Plate.

Q: 2. can this work in a dana dolly?

A: NO this Will NOT work on a DANA dolly

Q: 3. What is the weight capacity of this isolator?

A: The RigWheels Cloud Mount Pro Vibration Isolator can hold up to 65lbs.

Q: 4. Will this attach on a Dana Dolly? I want to do underslung specifically.

A: The Proaim Mitchell-Base Tilt Wedge (B&H# PRPMTCLWP) features a base with many holes in it that could be used with appropriate hardware (screws and washers) to attach it to a Dana Dolly Portable Dolly System with Universal Track Ends, 100 & 150mm Bowl Adapters (B&H# DADD150UK). However, unless you are thinking to drill holes in the dolly, please keep in mind that the screw holes may not line up. As such, you may need to mount the base of the tilt wedge at an angle so that you can use at least two screws or bolts to connect them.

Q: 5. Tension is adjustable to prevent bounce effects?

A: No, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps is designed to be used in a fixed/stationary position so bounce is not an issue.

Q: 6. Can it be installed on a suction cup with cheese plate such as Matthews 10" Vacuum Cup with Cheese Plate?

A: The Digital Photo solutions Vibration mount would work best with Suction cup mounting solutions that support the isolator like BH #CASK01. However it is a universal solution and could work with other suction cup mounting solutions like Matthews.

Q: 7. It supports and isolate a Sony FR7 as shown on the photo?

A: Yes, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps can accommodate and isolate the Sony FR7 Cinema Line PTZ Camera.

Q: 8. I have a benro BV10 (100mm). Will this be able to work? I have a Dana dolly 100mm Mitchell mount adapter.

A: When using the Proaim Mitchell-Base Tilt Wedge we can only recommend using the ProAim 100-150mm adapters that would allow you to work with your Benro 100mm head. Proaim Mitchell Base to 100mm Bowl Adapter BH #PRBP30200 https://bhpho.to/42uWySl

Q: 9. Is this designed to be used with suction cup on bottom? Can it be used with the suction cup on top and gimbal hanging below?

A: Here is a response directly from Kessler about your inquiry: While it would be possible to rig the KillShock Mini upside down the results are not likely going to be what the customer is expected as the Shock Modules would no longer be compressing and isolating the camera from vibrations as the weight of the camera rig would be pulling the shock modules. If the customer is looking for an underslung type of set-up with a vibration isolator a better solution would be the KillShock (MG1048) and the KillShock Inversion Mounting Kit (MG1068). KillShock (MG1048): https://www.bhphotovideo.com/c/product/1430583-REG/kessler_crane_mg1048_killshock_isolator_system.html KillShock Inversion Mounting Kit (MG1068): https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 10. Can I use the Zhiyun Crane 3?

A: Yes, but you will need to find a cheese plate/screws to mount to the isolator or nose plate.

Carlos	27/09/2024
[9.14 lb] I am a Videographer in Santa Clarita California. It took me 3 years of searching for the perfect Jib, my initial choice was Varizoom but they got so ultra expensive that I started looking into Proaim 10' wave 2, tripod kit with pan and tilt head, I got to say I made the right choice, this jib is perfect for me, because I can shorten or extend the arm length with out extra pieces. The build quality is great, very robust jib, no wobble whatsoever, I am buying a 6 inch mitchell extension at the tripod base, I think the tripod is a little shorter than I like, and I don't feel confident extending it higher, I think Proaim makes a tripod that can actually expand with no problem. I highly recommend this product. Blessings to you all. 5

Carl	21/09/2024
[Mitchell Mount] Based on the weight and specs, I was expecting this tripod to be heavy-duty, but once I had my hands on it, I couldn't wipe the smile from my face. Now when I look at (what was) my main video tripod, it looks like it is built for a child. When I load this up with a crane/jib, I won't have a worry in the world. This thing is a tank. I got the optional Mitchell to 100mm bowl adapter, and that component was also super heavy. I don't know of any tripod that would beat this one in its price range. 5

Steven	15/09/2024
[90°] Their gear is always have a solid robust build, I am never disappointed at the craftsmanship while other companies charge 4 times as much. cost and quality is excellent. If you're looking for a heavy duty tripod you will pay like $3000 more for it, this really is the best Tripod I have ever owned and I've owned lots in the past 20 years 5

Yuki	28/08/2024
[Aluminum] This allows my 2nd AC to move tripods much faster than normal tie down. Especially when I go from tripod to dana dolly/ slider etc, this is very handy. It's a bit expensive piece, but you are buying speed on set. Definitely saves me maybe total of 10 min or so at the end of the job. 5

Joseph	18/08/2024
[Mitchell Mount] Great slider that feels substantial and slides with smoothly. 5

Julian	05/08/2024
[9.14 lb] Great job. Quick and intuitive setup . Smooth movement and not very bouncy for a light jib. Used on a beauty commercial and still life shoot and very happy. Great value! Only notes would be to change the weight and camera set screws to hand tighten fasteners, not thrilled about needing a tool to adjust but not a deal breaker. 5

Jamie	02/08/2024
[90°] I've put this arm through its paces on a few shoots now and it is a workhorse. From the back of side-by-side ATVs to the front of a truck on a paved road I have been really impressed with its build quality, durability, and reliability so far. For those looking for a budget friendly option over more expensive black arms, this gets my stamp of approval. 5