Laird 4-Pin Xlr To Hirose Dc Power Cable 50Ft

Laird 4-pin Xlr To Hirose Dc Power Cable 50ft

Product Code: eq85107
Availability: In Stock

$247.47 $331.61

Qty

15 reviews Write a review

Description
Reviews (15)

Made for cameras with a DC output, primarily many Sony and Panasonic professional cameras, this 50' Laird 4-Pin XLR to Hirose DC Power Cable 50ftfrom Laird 4-Pin XLR to Hirose DC Power Cable 50ftis designed to let you connect compatible lights and monitors to the camera. The cable is from Canare, the XLR connector from Neutrik, and the 4-pin male is the Hirose HR10A7P4P.

Connect Lights/Monitors to Camera Output Neutrik 4-Pin XLR Female Hirose HR10A7P4P 4-Pin Male Canare Cable

Parameters
Connector 1	Neutrik 4-Pin XLR Female
Connector 2	Hirose HR10A7P4P 4-Pin Male
Length	50' / 15.2 m
Pinout	Pin 1: Ground Pin 4: 12 VDC
Weight	1.5 lb / 0.68 kg

Related Questions and Answers

Q: 1. what is the length of this cable?

A: The cable is approximately 10".

Q: 2. If i take the second cable like "DC to 2-pin" after this could it power the teradek 500 ?

A: Not that we are aware of. We are not aware of this cable being able to power a Teradek 500.

Q: 3. Does this cable and the SmallRig battery plate 2504 also work with the 6K Pro?

A: Yes, this will work on the Pro.

Q: 4. Will this work with the mini XLR port in the Blackmagic Pocket Cinema Camera 4K?

A: This cable is designed for a specific RED camera. The Pocket Cinema Camera 4K we recommend B&H # BLAXLRMINI2, which will work with that camera. https://bhpho.to/2BD1fi6

Q: 5. can this work as an extension for the intellytech mega cloth ?

A: The ARRI 3-Pin XLR DC Power Cable for SkyPanel Lights (1.6') can not be used to extend the head cord. This is an head extension for the Mega LiteCloth 3.0, BH #IN310013 (https://bhpho.to/3TXC2b7).

Q: 6. Would this adapter work for powering the new BlackMagic 4k Video Assist monitor?

A: The Blackmagic Video Assist 4K uses a 2.5mm barrel. This cable lists it offers a 2.5mm on one end which should connect to the Video Assist 4k.

Q: 7. Does this work with the 3058 V-mount plate?

A: It will work if the DC barrel connector can fit into the 12V port.

Q: 8. Can I use this cable to power my Fiilex P360 pro to the 15Volt XLR 4 output of the Fxlion Mega Battery without any concerns?

A: While the P360 Pro uses a 2.5mm DC barrel connection, this particular cable has not been tested with it to our knowledge.

Q: 9. Will it work on Ronin RS2?

A: Unfortunately not. Ronin RS2 does not implement the same power port as the Ronin S.

Q: 10. Hello! is it compatible with the sony fx6?

A: No, The Laird Digital Cinema 12 VDC Anton Bauer D-Tap to 2.5mm would not be supported by the FX6. We recommend this as an alternate. https://bhpho.to/3JOoQ01

Shannon	23/09/2024
[50' / 15.2 m] This cord allows you to attach a v mount battery to power a preamp/mixer for your video cam. 5

Adam	24/08/2024
[50' / 15.2 m] I got this hopefully remove the ground loop hum that would occur when using a battery eliminator for my Sennheiser G4s. If they were connected to my main battery distro, the connected Zoom F8n would cause unacceptable ground loop, and thus prevent me from using the battery eliminators. I bought this and experimented a bit and found that if I put this power isolator between the G4 and the battery distro box, the hum was effectively gone (only noticeable if recorder gain was set way higher than I would ever use). I plan on buying a second to use with the second G4 so that I can more effectively get the most of of my battery distro system. 5

Dominic	22/08/2024
[50' / 15.2 m] Great Plugs!!! 5

Frederic	11/08/2024
[50' / 15.2 m] Simple and works. Cable flexible enough in the cold. 5

Robert	25/07/2024
[50' / 15.2 m] I use this to power my Azden FMX-424-Channel Mixer. I use a Core SWX Nano-U98 14.8V Battery with D-Tap - BH# CONU98. That powers my mixer for days. 5

Karlos	06/07/2024
[50' / 15.2 m] Does the job well. Provides power to my Zoom F8n for hours on end. Quality build. 5

Jacob	26/05/2024
[50' / 15.2 m] If you're looking for a durable, heavy duty cable that you can count on every time, this is your cable. 5

Daniel	23/05/2024
[50' / 15.2 m] It...does what it's supposed to do. I use it to use IDX v-mounts with a plate that has a 4pin XLR so I can use it to power my Red One.Some people may think this cable is expensive, but lemo connectors are expensive for any cable manufacturer. And after buying so many steadicam cables, any cable under $ feels cheap.Only thing I would've liked/preferred would be if there was a right angle option, since I tend to mount batteries on rails behind the camera, and I need lots of space for it. 5

Tristan	22/05/2024
[50' / 15.2 m] I use this to power my Fujinon ENG lens (HA17x7.8) from a v-lock battery distributor (Tilta) attached to my Blackmagic pocket camera. It works great and is great value for money as it's a lot cheaper than the genuine Fujinon cable. 5

Douglas	22/05/2024
[50' / 15.2 m] This works right out of the box, with either of my mixers. No more changing batteries in the middle of the day. Love the curly cord - keeps things neat in the bag. 5