The cocoa Shure DL4 Omnidirectional Lavalier Microphone for Bodypackis a waterproof, omnidirectional miniature lavalier microphone equipped with a TA4F connector for compatible Shure wireless bodypack transmitters. Built to withstand the rigors of professional use with an IP57 dust-resistant, waterproof rating, this durable mic offers a neutral, full-range sound ideal for capturing speech, dialog, and singing in broadcast, reality TV, presentation, and theater applications.

The DL4 DuraPlex features a 5mm miniature capsule for discrete placement. The mic also offers high gain before feedback, making it well suited for speech and dialog at events with loud sound reinforcement. To compensate for any potential loss of high end when positioning the mic, a presence cap is included that boosts the 10 kHz range about 3 to 4 dB for added clarity and intelligibility—this is especially helpful when concealing the lav for film and theatrical work.

Designed to stand up to adverse conditions, the mic is equipped with a long-lasting, fully paintable, 1.6mm Shure Plex cable. The dual-redundant ground in the cable serves as secondary shield, giving it unprecedented durability and immunity to memory effect and kinks.

For Reality TV, Theater, Speech    For Shure Transmitters, TA4F Connector    5mm Miniature Design, Omni Polar Pattern    IP57 Dust-Resistant, Waterproof Rated    1.6 mm Shure Plex Cable

• Neutral, full-range sound quality for film, broadcast, speech, theater, and performance applications
• IP57 dust-resistant, waterproof rating
• 20 Hz to 20 kHz frequency response
• 132 dB maximum SPL
• 5mm omnidirectional miniature design
• Advanced 1.6mm Shure Plex cable with secondary shield for longevity
• Cable is immune to memory effect and kinks
• Fully paintable cable with typical theater paints, pens, and polishes
• Presence cap included for additional vocal clarity and presence (3 to 4 dB boost near 10 kHz)
• Includes a regular foam windscreen and a snap-fit foam windscreen that holds tightly in place
• Includes carrying case
• Cocoa, with TA4F connector

Related Questions and Answers

Q: 1. does it work with panasonic hc 900?

A: There is no audio nor out on the camera. The only port is a micro USB. I don't believe it will do anything other than allow you to transfer images, and charge the battery.

Q: 2. Will the Rode Lavalier ii work with Saramonic uwMIC9s?

A: Yes, the RODE Lavalier II Omnidirectional Lavalier Microphone can be used with the Saramonic UWMIC9S.

Q: 3. does the mic work without the batteries with a recorder?

A: Unfortunately no. The battery in this microphone is required to power the microphone.

Q: 4. How long does the battery last? I realize Y'all carry spares but if it dies in the middle of a shoot you're SOL. So about how many hours have people gotten out of this? That you way you can know approx when to replace without having to carry a meter around.

A: About 10 hours of continuous use.

Q: 5. Can the Polsen OLM-10 be plugged directly into a computer to record voice over?

A: Yes, it will plug right into your computer's microphone jack.

Q: 6. Does it fit the Rode Lavalier Go?

A: No, I don't think the Shure Snap-Fit Windscreen for DL4 and DH5 DuraPlex Microphones is going to work with the Rode Lavalier GO because the microphones that this windscreen is designed to fit are flat and the windscreen snaps on. As a better option for the Lavalier GO, you can use the WindTech Windscreen- 3/16" - 3-Pack, White (B&H # WI2300PW).

Q: 7. Is this a stereo mike or mono. If mono why the dual sleeves?

A: It is a mono microphone. Dual channel mono since most cameras have a two channel input.

Q: 8. could I use this mic with canon 7d?

A: Yes, just connect it to the 3.5mm mic stereo input.

Q: 9. If I use two OLM-10 microphones connected to a single camcorder via a Y connector, will there be any feedback issues? I know that purchasing one OLM-20 will not result in feedback, but I would prefer to purchase two OLM-10 microphones if there is no feedback issues. Thanks!

A: Using a Y connection is NOT recommended. The results will probably result in an audio track that is very distorted or over-modulated. Use a small mixer: The Azden CAM-3 3-Channel Mic Mixer allows you to add and mix sound from three Azden wireless or hard wired microphone sources simultaneously.Input Connections: -------------------------Input 1 and 2: 3.5mm MonoInput 3: 3.5mm Stereo ------------------------Output Connectors: 1 x 3.5mm stereo

Q: 10. how to turn the volume up on your mic?

A: Unfortunately there is no volume control available on the mic itself. Input volume would be adjusted on the device the mic is connected to.