Relatively small and lightweight, the DZOFilm VESPID 75mm T2.1 Lens PL EF Mountsis part of the VESPID series of lenses from DZOFilm and is well suited for independent and high-end full-frame cinematography. The lens has an 80mm front diameter, allowing it to work with virtually any cine-style matte box. The small size makes this lens an attractive option when working with drones and gimbals, as well as when shooting handheld or run-and-gun. The interchangeable PL mount and included EF mount allow you to use the fully manual lens on a variety of modern and vintage cine cameras, while the full-frame coverage supports sensors that have an image circle up to 46.5mm for use on cameras with sensors up to full-frame without vignetting..

The 16-blade iris, which is consistent throughout the VESPID prime lens lineup, creates round out-of-focus highlights that have a more natural appearance and contribute to the lens's natural-looking bokeh. The focus ring features 270° of rotation for precise focus pulls, and the iris ring has a generous 68° of rotation. Cine-style gear rings on the focus and iris rings make the lens compatible with cine-style lens accessories such as follow focus units, lens motors, and lens control systems.

Covers Full-Frame Sensors    T2.1 to T22 Aperture Range    80mm Front Diameter    16-Blade Iris    Cinema Gearing for Focus and Iris    270° Focus Rotation    Magnetic Rear Clear/ND Filter

This 75mm lens has an image circle that covers a full-frame sensor. When mounted on a camera with a Super35 sensor, it provides you with a tighter shot than if mounted on a camera with a full-frame sensor.

The lens features metal construction to withstand the rigors of daily production.

The common 80mm front diameter allows for quick lens changes as you don't have to swap out antireflection donuts or adapters to use the same matte box.

A minimum focusing distance of 2' allows you to get up close to your subject.

Related Questions and Answers

Q: 1. Will this lens work with an Autofocus lens adapter on a Sony FF camera?

A: The lens can physically mount to an appropriate adapter (such as EF to E mount), that has autofocus features, however, that will not give a manual focus lens (such as the DZOFILM VESPID 25mm T2.1 Lens (PL & EF Mounts), autofocus, as lenses require internal motors to function with autofocus.

Q: 2. Is this fit with Sony a7iii and a7siii

A: You will need a Canon EF or ARRI PL to Sony E Mount Adapter.

Q: 3. Will these Vespids (EF mount) fit BMPCC4k with Speedboosters?

A: Yes they will.

Q: 4. Can I interchange the mount to a PL mount using the PL mount adapter from DZO?

A: The DZOFilm VESPID 75mm T2.1 Lens (EF Mount) (B&H# DZ75VEF) has an interchangeable mount (between EF and PL using DZO's mounts) and may also be used with other mounts when using DZO's Octopus adapters.

Q: 5. Can you swap the mount on this lens like with the Pictor Zooms?

A: Yes you can. The Vespid Primes and the Pictor Zoom lenses both feature swappable mounts. If you need to swap the mount on your lens we sell the DZOFilm PL-Mount Tool Kit for Pictor Zoom & Vespid Lenses B&H # DZOACC1MPL MFR # DZO-ACC1MPL

Q: 6. How far does the rear element pl mount protrude? Is it shorter than 14.5mm to work with my metabones pl-rf 0.71x speedbooster?

A: The rear element of the Vespid 21mm T2.1 lens (PL mount) protrudes 14.3mm. Therefore, it should be compatible with your Metabones PL-RF 0.71x speedbooster, given your requirement of it being shorter than 14.5mm.

Q: 7. Are the mounts on this camera interchangeable?

A: Yes. The following unit be swapped out and remounted.

Q: 8. Will these Vespid primes (EF mount) fit BMPCC4K with Speedbooster?

A: Yes it will. This is an EF lens that covers a full frame sensor. It can be used with an EF to MFT Speedbooster.

Q: 9. What is the length of the 25mm Lens with the front and back caps on?

A: With lens caps on it measured to be 5 and 3/8".

Q: 10. Is this lens support 8K footage?

A: Yes, the DZOFilm VESPID 50mm T2.1 Lens (PL Mount) can resolve 8K footage.