The L1 PRO Series Sub2 Portable Bass Module is a high-output active subwoofer well suited for mobile entertainment, AV rental, event production, clubs, and performance venues. The 18x10" RaceTrack direct radiating driver is powered by a 1000W Class-D amplifier, which delivers high sound pressure levels with dynamic and musical sound reproduction of very-low frequencies.

The Sub2 connects to the L1 PRO32 line array via SubMatch cable and works seamlessly with the L1 Mix app. The subwoofer can also be paired with a Bose S1 Pro system to create a micro-PA. An M20 threaded input on the side of the sub allows you to deploy a speaker pole for any speaker up to 34 lb. Two subs can be used together for a cardioid mode, which lowers the stage volume and decreases feedback issues. The Sub2 ships with a slip cover and a power cord.

18x10" RaceTrack Designed Driver    Equivalent to Conventional 18" Woofer    Plays Low to 37 Hz    Lightweight & Easy Setup    Two Combo XLR-1/4" Inputs + XLR Outputs    Phase/Pattern Control    Cardioid Mode with Two Sub2 Modules    SubMatch Input and Thru    Includes Slip Cover and Power Cord

The Sub2 is a powered, portable bass module that combines with virtually any portable PA and delivers low-end performance down to 37 Hz. Sub2 is the most powerful subwoofer option for the Bose L1 PRO32, combining seamlessly via single-cable SubMatch connectivity.

The unique RaceTrack woofer integrated into the Bose Sub2 modular subwoofer delivers powerful bass, has an optimized center of gravity, and save a lot of space. This slim design means you get the full impact of a conventional subwoofer without the cumbersome size, freeing up room in your vehicle and on the stage, and making every carry in between home to car, vehicle to venue much easier.

Related Questions and Answers

Q: 1. Can this camera fit the Typhoon Yuneec H plus and work properly

A: Unfortunately no. The YUNEEC ION L1 Pro Camera will only work for the Typhoon H3.

Q: 2. - How effective is it to capture lighting strikes from thunderstorms at evening/night? And at daytime?- It seems it doesn't come with any cable, right?What exact cables do I need to trigger: Canon 5D Mark 3, Canon 70D and Panasonic Lumix G7?- What is the maximum number of shots that this can take using intervalometer mode?Thank you!!

A: there is a light sensor in the main promodule unit. the other piece is the IR module for ustilizing a wide ir beam to trigger. the sensitivity is adjustable for both light and sound as well as a built in delay of shutter release. To connect to either of those cameras there are two options, hard wire connection of pro module to camera utilizing the HL capcord set. or if you purchase the HL -CAPTUR C you then have wireless connection. PLease see www.hahnel.ie for in depth PDF's of how to connect.

Q: 3. Can this or any other sensor be used to trigger video, not stills, on a Sony a7S or a7S2?

A: This is from the HAHNEL website:When it is used for camera remote control, the Captur mimics the action of the shutter button on the camera body. If it is possible to start/stop video recording using the shutter button on the camera body, then this can be done remotely also using the Captur. If video record start/stop is not possible using the shutter button, as is the case for most DSLRs, then it cannot be achieved by the Captur either.

Q: 4. So I was thinking about purchasing this for photographing wildlife by setting up camera traps during the night. I was wondering about how wide the IR beam is and if the sensitivity can be adjusted. For example I'd like to set my camera to the side of a game trail and have the camera shutter release when an animal crosses in front of the IR beam. I was wondering if the sensitivity to be adjusted because I wouldn't want say a blowing foliage or a bug setting it off. Can this do what a motion detector could do?

A: the distance variesa however the sensitivity can be adjusted.

Q: 5. Does this also fit the S1 Pro +?

A: Yes, the Bose S1 Pro Backpack will fit the Bose S1 Pro+ Wireless PA System as well as the Bose S1 Pro Multi-Position PA System.

Q: 6. Is the Capture Pro Module basically a transmitter?If I understand this product right, I can wirelessly use the Pro Module to trigger speed lights with the addition of a Receiver Module with any of the four sensors? Is it also possible to trigger a camera with just the Pro Module and a Receiver Module?Last question, what would the Transmitter Module be used for for from this link, https://a href= http://www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html target= _blank www.bhphotovideo.com/c/product/1140337-REG/hahnel_hl_captur_n_capture_wireless_shutter_flash_trigger.html/a , is this something I would need to use the Pro Module?

A: from the link provided, the pro module would replace the transmitter, allowing you to trigger from the methods the pro module provides.

Q: 7. I have Olympus OMD EM1 mark 2 and 3. What cable would I need?

A: You will need a 2.5 sub mini cable, click the link below to view; https://bhpho.to/314utnp

Q: 8. Can someone please explain, in simple but clear terms, what all is needed to use this thing? I've read most of the manual and the words optional - available separately keep coming up. The same words are scattered throughout the description. I have a Nikon D7100 and it appears that a cable is necessary somehow to use this. But evidently it isn't included. Or, maybe it is based on one of the reviews. And to use it with a laser you have to buy a laser separately. How and where do you buy a laser ?Please respond in a simple manner as I have trouble envisioning what all is needed.Thank you.

A: for wired configuration the pro module connects to your camera using a P1 cable.HL-CAPCORD N this is a set of cables for all nikon cameras, the cables are available from other manufacturers as well. No a microhone is built into the pro module.https://a href= http://www.youtube.com/watch?v=0iODHFbDLzo target= _blank www.youtube.com/watch?v=0iODHFbDLzo/a this youtube video shows real world examples of the triggering methods of the pro module.for IR the small module throws out a wide ir beam that is pointed at the pro module. whenever something crosses the beam i.e. (animal or person who walks past your desk), the trigger will fire and capture the image. i have used the captur pro module personally for all but the laser pointer function and have had a blast,(especially july 4th!) never have i gotten better fireworks shots.

Q: 9. I have a Canon EOS 6D. I want a wireless intervalometer to do time-lapse, but want the ability to expand into external triggers in the future. If I buy a Captur Pro, will a Receiver Module do this or do I need the Transmitter/Receiver set? Or if I buy a Captur Timer for Canon now, would the Receiver part of it work with the Pro if I bought a Pro in the future? I dont quite understand how the Pro interfaces with the camera.Thanks

A: The needs for you are the receiver the pro module and the cable set. http://www.hahnel.ie/irish-shop/captur_cable_pack_for_canon/http://www.hahnel.ie/irish-shop/captur_canon_receiver/http://www.hahnel.ie/irish-shop/captur_module_pro/if you purchase the captur for canon or the timer kit for canon all pieces are needed to expand using the pro module.

Q: 10. hi, I would have, politely two pieces of information, the first if I can use Remote Control and Flash Trigger of cactus or yongnuo instead Hahnel Captur Remote Control and Flash Trigger ?The second piece of information is whether the cable, Impact Shutter Release Cable for Nikon Cameras with 10-Pin Connector, is suitable for nikon d810 ?thank youAntonio

A: Question 1. Not sure what you are asking but you can use the Hahnel to trigger either your flash or your shutter. I use pocket wizards with it to remotely trigger my shutter.