Automatically or manually switch one of two HDMI inputs to an HDMI output with the Kramer VS-211X, a 2x1 HDMI auto switcher with support for HDR signals up to 4K at 60 Hz (4:4:4). It provides options for automatic switching based on priority or the last-connected source. To ensure plug-and-play operation with your HDMI sources and display, the VS-211X utilizes Kramer's I-EDIDPro algorithm, which executes EDID handling, processing, locking, and pass-through functions.

This auto switcher is HDMI 2.0 and HDCP 2.2 compliant, plus it supports 32 channels of uncompressed digital audio to allow high-quality surround sound. There's also a 3.5mm stereo analog audio output that outputs a de-embedded audio signal in parallel with the HDMI output. The compact and durable DigiTOOLS aluminum enclosure features LED indicators for active output and power status and uses convection cooling to avoid fan noise. It also provides a barrel input for powering via a 5 VDC source.

2x1 4K HDR Signal Distribution    Automatic and Manual Switching    HDMI Resolutions up to 4K at 60 Hz 4:4:4    Multichannel Audio Switching    I-EDIDPro Intelligent EDID Processing    HDCP 2.2 Compliant    3.5mm Stereo Audio Output    Status LED Indicators for HDMI Ports    Compact DigiTOOLS Fanless Enclosure

The VS-211X automatically plays the switched source signal on the connected display according to user-configured preferences, such as priority or last-connected input. When the user manually switches, by pressing a button, the auto switching is overridden.

The switcher is HDCP 2.2 compliant, supporting deep color, x.v.Color, CEC, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0.

The VS-211X handles up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.

Intelligent EDID handling, processing, locking, and pass-through algorithm ensures plug-and-play operation for HDMI source and display systems.

The digital audio signal passing through to the HDMI output is de-embedded and converted to an analog signal and sent to the 3.5mm stereo unbalanced analog audio output. This enables playing the audio on locally connected speakers, in parallel to playing it on the speakers connected to the AV acceptor device (such as TVs with speakers).

Use the local buttons or remotely connected contact-closure buttons (via the 3-pin terminal block) for flexible user input selection and switching control.

Status LED indicators for HDMI ports facilitate easy local maintenance and troubleshooting. Local firmware upgrade ensures lasting, field-proven deployment.

The compact DigiTOOLS fanless enclosure enables user-reachable table mounting, or side-by-side mounting of three units in a 1 RU rack space with an optional rack adapter.

Related Questions and Answers

Q: 1. what is the max. distribution distance ?

A: An HDMI signal travelling over a standard HDMI cable with no built in signal booster will generally have a distance of 50 feet.

Q: 2. Some people have reviewed this product like it's a switcher. As far as I can tell it's only a splitter, correct? One device in (i.e. laptop or Blu-ray player) sending that signal to up to 4 monitors. Correct?

A: You are correct. It will take 1 signal and send it to 4 destinations.

Q: 3. In our scenario we would want to have 2 input signals and input one would be feeding both outputs and under fault scenario input 2 would go to both outputs. - Also do you have a computer input card to put second signal back into another computer? Thanks Brent

A: This unit should work for you. It has 2 inputs, with one input going to both outputs and the other input on stand-by. If the first input drops, the 2nd input will take over and be sent to both outputs. We have SDI Capture Cards from Magewell as well. SDI Internal Capture Card - https://bhpho.to/2yU3GvD SDI USB Capture Card - https://bhpho.to/2AMiM5Y

Q: 4. Does it create seamless cuts or is there some delay resulting in lost of signal for a second?

A: There is no visible delay when you cut with this device.

Q: 5. Will it cause damage to keep this powered on 24/7/365? We have it installed in our employee training room (auditorium).

A: Yes, the KanexPro 8K HDMI 2x1 Switcher should operate without fail 24/7. I would recommend having a spare on hand if it is a mission critical part to your training room.

Q: 6. Hi, Please help me check the origin of it? Thanks

A: The Kramer 2x1:2 3G HD-SDI Automatic Standby Switcher: Country of origin: ISRAEL.

Q: 7. Does the unit switch upon sync loss or image loss? Is there a sensitivity setting if the latter?

A: This will switches to the secondary input when the primary input is lost. It does not specific sync or image, but in either case the signal will be lost and require going to the other input.

Q: 8. Can it output to 2 displays of different resolution? i.e. 4K + 1080p (downscaled)

A: This is a splitter that will output the same signal that is inputted to it. If it is given a 4K signal, the 4 HDMI outputs will have the same 4K signal. It will from there be a matter of if the TV you are using can downscale a 4K image itself.

Q: 9. Hi, does the switcher allow pass through of lossless audio and is it compatible with atmos, dts-x, dolby vision? also, is the 4k @60hz 4:4:4 for resolution of 3840 x 2160 pixels or 4096 x 2160 pixels? thanks much,George

A: It our understanding that all signals, audio and video, go through. Here is the information that Kramer provides. https://bit.ly/2s4Z3dT

Q: 10. Does this product allow to control video wall? (to show one image splitted on 4 motitors) Or it only shows the same image on al

A: The Gefen UHD 4K 600 MHz 1x4 HDMI Splitter with HDR Support (4K, 60 Hz, 4:4:4) does not have any video wall features at this time.