Ironman Magic Arm 17 Lb Payload 11" Digitalfoto Solution

Product Code: eq85598
Availability: In Stock

$42.00 $54.60

Qty

20 reviews Write a review

Description
Reviews (20)

True to its name, the 11" Ironman Magic Arm 17 lb Payload 11" DigitalFoto Solutionfrom Ironman Magic Arm 17 lb Payload 11" DigitalFoto Solutionis exceptionally strong, offering support for accessories weighing up to 17 pounds on your camera, cage, or other support. This aluminum alloy arm features a 1/4"-20 thread on each end and three points of articulation that are adjusted using a sturdy, twist-style center lock. The ball joints at each end provide swivel and tilt adjustment and feature nonslip rubber padding and thumbwheels for tightening your accessory on the mount.

Open Box Products Have a Limited 1-Year Manufacturer Warranty 11" Maximum Length Supports up to 17 lb 3 x Points of Articulation 1/4"-20 Ball Joint Ends Secure Twist-Style Lock Durable Aluminum Construction Nonslip Pads

Parameters
Load Capacity	17.6 lb / 8 kg
Top Mount	1/4"-20 Male
Bottom Mount	1/4"-20 Male
Points of Articulation	3
Material of Construction	Aluminum
Maximum Length	11" / 27.9 cm
Weight	8.5 oz / 240 g
Packaging Info
Package Weight	0.665 lb
Box Dimensions (LxWxH)	8 x 3.9 x 1.9"

Supports a monitor or another accessory weighing up to 17 lb

Tighten the center twist lock to simultaneously lock the center joint as well as both ball ends

Sturdy aluminum alloy construction

Related Questions and Answers

Q: 1. Is it suitable to use it with the Dji Rs2-Rs3 ?

A: The DigitalFoto Solution Limited ER3-10 Vest with Top Bar Stabilization System for DJI Ronin 4D (6.6 to 22 lb Payload) is designed to be used with a system with a top handle. It will not work for the DJI RS2 or RS3 without modification, such as a quick release that will allow for underslung mode with the 1/4 20 receiver on the base of the gimbal.

Q: 2. Will this fit on the Easy Rig MiniMax?

A: The DigitalFoto Solution Limited ER3-10 Vest with Top Bar & Dampener Stabilization System for DJI Ronin 4D (6.6 to 22 lb Payload) and the Easyrig are to completely different vests.

Q: 3. What is the weight of the assembled rig (without gimbal)?

A: The Handheld Gimbal Ring weighs 3 kg.

Q: 4. Are you sure they are 3/8" screws? I have one in front of me and they are both 1/4" screws. Also from the picture the screws are too small for being 3/8", and the spacing of the locating pins is like the one for the 1/4", not 3/8". I believe your informations might be wrong.

A: The DigitalFoto Solution Limited Magic Arm with ARRI-Style Mounts has a 1/4 20 screw on each end of the arm. See image https://bit.ly/3j991G3

Q: 5. Does it comes with the bag?

A: Yes, the DigitalFoto Solution Limited ER1-8 Vest with Top Bar Stabilization System for DJI Ronin 4D (2.2 to 17.6 lb Payload) comes with one black carry bag.

Q: 6. What's the weight capacity of this arm ?

A: I believe the weight limit is 12 lbs. But it would feel sturdier with less than 10. In my opinion.

Q: 7. Will this work with the DJI 4D?

A: Yes, the DigitalFoto Solution Limited THANOS Pro with Adapter is compatible with the DJI Ronin 4D.

Q: 8. What is the size of the silver pin on the end of the spring arm?

A: The silver pin/post on the dual spring arm included in the DigitalFoto Solution Limited THANOS Pro with Adapter for DJI RS 2/3/3 Pro & Single-Handle Gimbals (11-40 lb) kit is 16mm.

Q: 9. can this be combined with the #DIMAGICRINGX and the rs2 mounted on the ring?

A: Yes, you can attach DigitalFoto Solution Limited Magic Ring X for Gimbals with a DJI RS2 Gimbal to the DigitalFoto Solution Limited ER3-10 Vest.

Q: 10. Are the pins removable?

A: Yes they are.

TA	25/09/2024
[3] If you already have an arm and vest (with appropriate arm post) and need a simple solution that allows you to fly a single-handle gimbal without counterweights, this adapter works like a charm. It's highly adjustable and comes with accessories that will make it fit your particular setup. As with any gear purchase, just be sure to read the product details for gimbal compatibility (in this case DJI RS 2, RSC 2 & Ronin-S SC, Zhiyun CRANE 3S/2S & WEEBILL-S & 2, Feiyu & Moza) I've been looking for such a solution for quite a while - glad I finally found this! 5

Chadwin	23/09/2024
[3] The mount is made of solid metal and fits perfectly. Since DJI wasnt smart enough to add a standard 1/4 20 thread mount anywhere on the Ronin S, Im glad I found this! I use it to mount my monitor and it works great. 5

Austin	22/09/2024
[8 x 3.9 x 1.9"] Very smooth and rigid considering the design... much easier to bring on shoots than a traditional rail slider. 5

Eduardo	11/09/2024
[8 x 3.9 x 1.9"] Very good, very price 5

Kirk	09/09/2024
[1/4"-20 Male ] I use them to clip my Quantum battery packs to various light stands. They've got the place for clip mounted items, but about a million threaded mounts for everything else. 5

Chris	28/08/2024
[1/4"-20 Male ] This piece is as smooth as silk. Perfect for wedding films. I have nothing negative to say. Game Changer! 5

Peter	14/08/2024
[8 x 3.9 x 1.9"] The heaviness to it is nice. When you move it, it feels solid and not shaky. Goes in your backpack or luggage very easily. There are negatives but if you aware of them before buying you can make a workflow work for you. If you plan on shooting an external audio mic on top of the camera, be aware that it may pickup the gear wheel sound in the slider. If shooting lav or boom for most of your videos you are gravy. It also helps to by a tabletop tripod so you can use the slider on the ground or tables when a tripod is not necessary. I like this slider for the price, and a good stand-in until you can upgrade to the Edelkrone motion kit. 5

Christopher	04/08/2024
[1/4"-20 Male ] I just unboxed the DigitalFoto Solution Limited Magic Ring X for Gimbals. It came with the right stubby screwdrivers & hex key. Has a nice soft carrying case and assembles/breaks down in a minute. It has a quality construction and should work with both EasyRigs & ReadyRigs, 5

Basulto	14/07/2024
[1/4"-20 Male ] For delicate works, it is an unalterable accessory. Practical and light to carry, it saves you a lot of grip material. A true jewel 5

David	15/06/2024
[8 x 3.9 x 1.9"] If you are using a gimbal for live-streaming this item along with the df M-0667 L-Bracket are a must have. I use both to hold my monitor while I move around and stream. It keeps the monitor right where I need it when I'm holding the set-up above my head for the perfect shot. It is also great if you want to keep the monitor from disturbing others in low light condition. 5