The Slik Sliding Arm II Camera Supportfrom Slik Sliding Arm II Camera Supportis a mini-boom extension arm that allows photographers access to multiple unique angles and vantage points when added to an existing tripod leg set. The arm tube is connected to a fulcrum that allows it to swing, shift, tilt, and move freely in any direction. Extending up to 19.5" out over the legs of a tripod allows for vertical, lateral perspectives that are useful for copy stand or macro photography applications. The extension tube arm features a 50mm scale, making it easy to determine placement, and also incorporates a counterweight hook for stability as the arm is extended out from the tripod. The sliding arm features knob threads that lock into place at multiple positions, and a 1/4"-20 head mounting screw that is compatible with most tripod heads.

Load Capacity: 4.4 lb    Length: 19.5"    1/4"-20 Head Mounting Screw    50mm Extension Scale    Counterweight Hook

Related Questions and Answers

Q: 1. Is it possible to attach a ring light?

A: The Slik Sliding Arm II has a standard 1/4"-20 head mounting screw. If the ring light has a 1/4"-20 socket it will mount. If the ring light has a different mount you will need an adapter.

Q: 2. Hi I just got this stand in and was very disappointed because the stand is too tall! Im assuming I just fit the pieces together right?

A: Yes. The vertical pole is designed with 2 pieces but the upper pole section isn't required to use the stand. I also have a problem with the upper pole installed as it's too tall for my studio ceiling. However, in my circumstance, by leaving the upper pole off, the vertical adjustment with just the lower pole is all that I need due to the size of my softboxes. I have read where others have used a metal hack-saw to cut the upper pole to an acceptable height based on their requirements.

Q: 3. Will this fit the Impact Folding Wheel base stand? - BH # IMLSPSFB8

A: This product is specifically for the Impact Column Stand with Sliding Arm and most column stands with a 1.4-inch diameter, which do not have any additional risers at the top like the Impact Folding Wheel Base Stand.

Q: 4. Will it fit the Impact Deluxe Varipole Support System?

A: Unfortunately, no, the Impact Sliding Arm Support with Hand Grip is not compatible for use with the Impact Deluxe Varipole Support System. It is only compatible for use with the Impact Column Stand. The Impact Column Stand has a uniform tubing diameter of 1.38” (35mm), while the Autopoles and Varipoles have a larger tubing diameter of (bottom) 1.77” (45.4mm) & (top) - 1.58” (40mm). They are not compatible or interchangeable with one another.

Q: 5. Will this hold a Bowens Gemini 500 monolight with a soft box ?

A: No. It will hold the monolight with no problem but using a softbox will cause it tip with the slightest movement, unless some weight is placed on the opposite leg. Also, there is not much clearance to adjust the angle of the softbox. It is an awesome stand for a single light. I have 2 of them and one I use as a camera tripod when shooting in studio. The pistol grip allows for very quick adjustments.

Q: 6. Doe the sliding arm rotate around the pole without engaging the pistol grip? I need stationary for camera mount.

A: The Impact Sliding Arm Support with Hand Grip BH #IMME126 arm can be fixed to a position for use with cameras.

Q: 7. Will this fit a Mathew's c stand?

A: The Impact Sliding Arm Support with Hand Grip will not fit the column on a Matthews C-Stand.

Q: 8. Im using an 86 PLM and Einstein with this based on recommendation from Rachel Vanoven. Do I need any other attachments or mounts ??

A: You dont need any other attachments or mounts. I use Einstein with 86 Plm as well and this stand is a dream to work with. Enjoy!

Q: 9. Is there a shorter top section that you can buy? (without using a hacksaw to cut it to make it shorter.)

A: The Manfrotto 231B Column Stand with Sliding Arm (8') comes only in that complexation. As an alternative there is a slightly lower one at 7.25ft Impact Column Stand with Sliding Arm https://bhpho.to/3tLAz84

Q: 10. Would you trust this to hold securely with the tripod center pole mounted horizontally, such as is supported by Manfrotto 055 models?

A: With a load capacity or 22 pounds this is a very sturdy Leveling Unit. Just as long as the load is below 22 pounds it should work well horizontally.