The fully adjustable Avalon Dual CDJ Stand - DJ Equipment & Accessoriesis designed to elevate a pair of Pioneer CDJ-3000, Denon DJ SC6000M, or similar-sized media players off the DJ booth surface, leaving room for turntables or additional decks on either side of your mixer.

The twin CDJ arms can be positioned at any height up to 19" above your workspace. Once set in place, they are secured with a bolt locking system to keep them from moving around during performances. The trays pivot and tilt independently and feature lips at the top and bottom to hold your gear in place. Each tray is 12" wide with a variable depth of 14 to 18" making them compatible with smaller media players to the full-sized CDJ line.

For CDJ-Sized Players or Controllers    Trays Tilt and Pivot Independently    Adjustable Lips at Top and Bottom    12" Wide x 14 to 18" Depth    Maximum Tray Height: 19"    Base Plate: 16.5 x 19"

• Dual CDJ stand with independently adjustable twin arms
• Trays fit most single-deck CD and media players including CDJ-3000, CDJ-2000NXS2, CDJ-2000 Nexus, CDJ-900NXS, XDJ-1000MK2, XDJ-700, DJS-1000, SC6000M, SC6000, SC5000M, SC5000, and NDX500
• Base plate fits most DJ mixers including DJM-2000NXS, DJM-900NXS2, DJM-900 Nexus, DJM-900SRT, DJM-850, DJM750MK2, X1850 Prime, Xone:96, Xone:43, Xone:43C, Xone:DB4, Xone:PX5, and more
• Heavy-duty powder coated steel base plate

Related Questions and Answers

Q: 1. Approximately how tall is this cart with stands on it?

A: The cart itself is 60 3/8" high, but the total height with the stands depends on the folded length of the stands. If using a stand with a folded height of 56", this would bring the total height with stands to approximately 70". Remember, this is just an approximate. Hope this is helpful.

Q: 2. Is this the same attachment shown holding c-stands? If so, how many will fit on it. If not, what is the name of the c-stand attachment? Thanks.

A: The Dual Tripod Holder for Equipment Carts would not be able to hold a C-stand very well, since the holder is meant to hold tripods with a wide head on top. A better option for C-stands would be the Backstage Equipment Mag C-Stand Holder, BH # BAMAGCS4 https://bhpho.to/3B9vt9B

Q: 3. does this work with the rode videomicro to attach it to a microphone stand?

A: This stand is meant for a light stand or tripod with a 1/4-20" thread. Typically, mic stands are 5/8" threads. You would have to get a 5/8 to 1/4-20 adapter, click on the link below to view; https://bhpho.to/34g3gw9

Q: 4. I have a S2415Hb and a P2414Hb monitor. Will they work on this stand?

A: Yes it will. Mounts up to Two 19 to 27" Monitors

Q: 5. Does it work with the Nikon SB5000 speedlight?

A: Yes, this is compatible with the Nikon SB5000.

Q: 6. can you raise it higher?

A: Yes, the height can be adjusted.

Q: 7. What is the width at the base when opened? Are there multiple detent positions for the legs?

A: Yes it has Multi-angle leg spread adjustment for stability. They do not specify the width of the base.

Q: 8. How tall is this with regular sized c stands on it?

A: The dimensions for the Backstage Equipment C-Stand Cart BH #BAGE04 with c-stands loaded is not available. We estimate a height of approximately 62 to 64" fully loaded with this type of C-stand: Impact Turtle Base C-Stand - 10.75' (Chrome) BH #IMLSCT40M: https://bhpho.to/3EHL4jb Maximum Working Height 10.8' / 3.3 m Minimum Working Height 4.8' / 1.5 m Load Capacity 22 lb / 10 kg Closed Length 4.8' / 1.5 m

Q: 9. What is the folded length?

A: The Vidpro ST-90 Adjustable 90" Tripod folded length is 21".

Q: 10. This work with sunpack DF3600U?

A: Yes, this will work with your flash.