Designed for use with Nikon WR-R11b Remote Controller for DSLR Camerascameras featuring an accessory terminal, the Nikon WR-R11b Remote Controller for DSLR Camerascan be used to wirelessly trigger the camera's shutter when paired with the separate WR-T10 or WR-1 Wireless Remote Controller. It can also be used to trigger select radio-enabled flash units or as a master to trigger up to 64 transceiver units. Additionally, suiting its use in busier environments, three selectable radio frequencies are available for reliable use.

For Cameras with an Accessory Terminal    Wirelessly Trigger Camera Shutter    Also for Radio-Controlled Flash Units    Trigger Using Separate WR-T10 or WR-1    Can Trigger Up to 64 Transceiver Units    Three Selectable Radio Channels

Related Questions and Answers

Q: 1. When using the WR-R-11b to trigger the SB-5000, do you have to use channel 3 to trigger other non-RF Nikon speedlights in group?

A: No, when using the following unit in order to trigger off third party unit they must be put in slave mode also keep in mind that the following unit can trigger off 64 Transceiver Units. And the following unit works only with the following Nikon models D4 (D4S, D810, D800, D800E, D750, D610, D600, D5500, D5300, D5200, D7200, D7100, D5 and D500).

Q: 2. What is the difference with this new item (WR-R11b) and the older WR-R10?

A: The WR-R11B now offers expanded compatibility for triggering the Nikon SB5000 flash from the new Z6 II and Z7 II mirrorless cameras.

Q: 3. Compatible with the Z8?

A: No, the following transmission system is adaptable to the following Nikon bodies at the moment Nikon COOLPIX P1000 Nikon COOLPIX P950 Nikon D3200 Nikon D3300 Nikon D5200 Nikon D5300 Nikon D5500 Nikon D5600 Nikon D610 Nikon D7100 Nikon D7200 Nikon D750 Nikon D7500 Nikon D780 Nikon Df

Q: 4. Is the WR-R11b compatible with WR-A10 adapter, so I can use it with either Z cameras or DSLR cameras with 10 pin port?

A: No, the Nikon WR-R11b is not compatible for use with the Nikon WR-A10. The WR-R11b can be triggered by a WR-T10 Wireless Remote Controller (transmitter), and a WR-1 Wireless Remote Controller.

Q: 5. I realize I need the WR-T 10 and WR-R11b for use with my Z 7 ii. But will it also trigger the SB 5000 speed flash?

A: Yes, the Nikon WR-R11b/WR-T10 Remote Controller Set would be compatible for use to wirelessly trigger an off-camera Nikon SB-5000 Speedlight Flash when used with a compatible camera.

Q: 6. Can the WR-R11a be triggered by a Nikon Z8 in synchronized release mode? I want to release my D750 at the same time as my Z8.

A: Yes, the Nikon WR-R11a Remote Controller can trigger the Nikon Z8 Mirrorless Camera while the Nikon WR-R11b Remote Controller triggers the Nikon D750 DSLR Camera simultaneously by paring them on the same channel and pin number.

Q: 7. Is this item compatible with the Z series of Nikon Mirrorless?

A: The Nikon WR-R11b/WR-T10 Remote Controller Set would be compatible with the following Z series of Nikon Mirrorless cameras. Z 7, Z 6II, Z 7II, and Z 6.

Q: 8. Will back button focus work with this?

A: Wherever you have your focus set doesn't matter because when you connect the remote you control everything through the remote.

Q: 9. RE: WR-R11b receiver. Is there an indicator light that confirms the unit was activated?

A: Yes, the WR-R11b has two LED indicator lights that signify an established connection as well as triggering. The top LED flashes red during triggering and/or AF activation and the bottom light flashes a longer green pulse when a photograph is fired (as opposed to a continuous short green pulse every few seconds that signifies the unit is connected to the WR-T10).

Q: 10. I'm looking for a more specific answer regarding the difference between the WR-R10 with firmware 3.0 and the new item WR-R11b? The answer that mentions "expanded capability" is not very helpful.

A: The Nikon WR-R11b is compatible with the Z Series cameras while the WR-R10 was not. Other than the compatible camera models they are the same.